EKI-5726F-AE

EKI-5726F/FI 16-port+2 SFP Gigabit Ethernet ProView Switch Features ƒƒ Communicates with SCADA software via Modbus/TCP ƒƒ Communicates with NMS (Networking management system) via SNMP ƒƒ Port-based QoS for deterministic data transmission ƒƒ -40 ~ 75°C operating temperature range (EKI-5726FI only) ƒƒ 12 ~ 48 VDC (8.4 ~ 52.8 VDC) wide-range power input ƒƒ EMS level 3 protection for extreme outdoor environments ƒƒ IEEE 802.3az Energy Efficient Ethernet (EEE) ƒƒ Jumbo Frame Support (Up to 9,216 Bytes) ƒƒ Supports redundant 12 ~ 48 VDC power input and P-Fail relay ƒƒ Loop detection RoHS COMPLIANT 2011/65/EU Introduction The EKI-5726F/FI are the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. EKI-5726F/FI switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance. Specifications Communications Mechanism ƒƒ Standard ƒƒ LAN ƒƒ Dimensions (W x H x D) 74 x 120 x 84 mm ƒƒ Enclosure IP30, metal shell with solid mounting kits ƒƒ Mounting DIN-Rail, Wall IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab 10/100/1000Base-T(X), Optional 100Base-FX, 1000Base-SX/LX/LHX/XD/ZX/EZX ƒƒ Transmission Distance Ethernet: UP to 100 m (4-wire Cat.5e, Cat.6 RJ-45 cable suggested for Gigabit port) SFP: UP to 110 km (depends on SFP) ƒƒ Transmission Speed Ethernet: 10/100/1000 Mbps Auto-Negotiation Gigabit Copper: 10/100/1000 Mbps, Auto-Negotiation Gigabit Fiber: UP to 1000 Mbps Interface ƒƒ Connectors ƒƒ LED Indicators 16 x RJ45 2 x SFP ports 6-pin removable screw terminal (power & relay) P1, P2, P-Fail, Loop detection 10/100/1000T(X): Link/Activity, Speed SFP: Link/Activity MAC Table Size Packet Buffer Size Switching Capacity Jumbo Frame 8K 4.1M bit 36 Gbps 9216 bytes Environment Certification ƒƒ EMI ƒƒ EMS Power ƒƒ Power Consumption ƒƒ Power Input ƒƒ Fault Output Max. 9.6W 12~48 VDC (8.4~52.8 VDC), redundant dual inputs 1 Relay Output Present Present ƒƒ Operating Temperature EKI-5726F: -10~60°C (14~140°F) EKI-5726FI: -40~75°C (-40~167°F) ƒƒ Storage Temperature -40 ~ 85°C (-40 ~ 185°F) ƒƒ Operating Humidity 10 ~ 95% (non-condensing) ƒƒ Storage Humidity 10 ~ 95% (non-condensing) ƒƒ MTBF 1,962,789 hours ƒƒ Safety Switch Properties ƒƒ ƒƒ ƒƒ ƒƒ Protection ƒƒ Reverse Polarity ƒƒ Overload Current ƒƒ Shock ƒƒ Freefall ƒƒ Vibration IEC/EN60950, UL60950, UL508, Class 1 Division 2, ATEX FCC Part 15 Subpart B Class A, EN 55011/55022 Class A EN 61000-4-2 (Level 3) EN 61000-4-3 (Level 3) EN 61000-4-4 (Level 3) EN 61000-4-5 (Level 3) EN 61000-4-6 (Level 3) EN 61000-4-8 (Level 3) IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 Industrial Ethernet Solutions All product specifications are subject to change without notice Last updated : 31-Mar-2015 EKI-5726F/FI Dimensions Unit: mm [inch] 11.1 [0.439] 33.4 35.6 [1.315] [1.400] 84 [3.307] 30.9 12.5 9 [1.215] [0.492] [0.354] 15 [0.591] 41.2 [1.622] 17.8 [0.701] 10.9 [0.429] 93 [3.661] 73 [2.874] 16.4 [0.644] Ordering Information ƒƒ EKI-5726F ƒƒ EKI-5726FI 16-port+2 SFP Gigabit Ethernet ProView Switch 16-port+2 SFP Gigabit Ethernet ProView Switch with Wide Operating Temperature Range Online Download www.advantech.com/products 129.8 [5.110] 129.8 [5.110] 11.7 [0.461] EKI-5726F 38 [1.496] 47 [1.850] EKI-5726F