OP10-PL01

OP10 HMI The TECO OP10 monochrome HMI offers a simple but powerful user interface for the SG2 (Ver 3) programmable Logic Relay. Monitor data registers in real time, change parameters, perform switching functions, list alarms, and transfer data between networked SG2’s*. Description OP10 4.3" Monochrome Graphic Panel, 192 x 64 pixels, 4 Function Keys, Numeric Keypad, 2 serial ports, 24VDC input power Price OP10-PL01 Cable (9-pin Serial, PC to 9-pin Serial, OP10) SG2-PL01 SG2 to OP10 Communication Cable SG2-Software SG2 & OP10 Programming S/W. Available on CD or FREE via download. General Specifications • 192 x 64 pixel display • 24-key keypad • Two serial ports: – COM1 supports programming and point-to-point communications – RS485 supports multi-drop networks • Supports Modbus RTU • Password protection • Import bitmaps • Offline program simulation • Bar graphs, trend charts, alarm logging ! EW N Power DC24V, -15% ~ +10% Current Consumption 80mA Max Approvals UL, CE Communication Interface COM1: (9-pin, D-SUB, female) RS-232/422; RS485: terminal screws Environmental Rating IP65 (front of panel) Maximum Devices 8 without repeater; 255 with repeater Dimensions 179.5 x 101.5 x 33mm (7.07 x 4.00 x 1.30”) Weight 460g (~1 lb) Environmental Programming Software Program the OP10 using simple fill-in-the-blank object windows. Establish network links to remote devices. Create dynamic text, trend charts, bargraphs, alarm logs, and more. View and verify your program in simulation mode. Download software free at: www.bb-elec.com/bb-elec/software/PLC/OP10-PCLINKV2.1setup.exe Dynamic Text Operating Temperature 0°C ~ 55°C (32°F ~ 131°F) Storage Temperature -40°C ~ 70°C (-40°F ~ 158°F) Relative Humidity 10% ~ 95%, non-condensing Vibration 1.75mm displacement, 5 - 9Hz Impact 15G, 11ms, vertical from X, Y, Z directions Dimensions 101.5mm (4.00”) FRE E Part Number 5.5mm (0.22”) 179.5mm (7.07”) 33mm (1.30”) Trending Cutout 163.8mm (6.45”) 85.8mm (3.38”) Bar Graphs Simulation Communication with one SG2 via programming port SG2-PL01 Simple Setup Multi-drop Modbus communications over RS485 network * *SG2 must be V-series to communicate on RS485. International Headquarters: 70 7 D a yto n R oad P O B ox 1040 O ttaw a, IL 613 50 U S A 815 -433 -5100 F ax 433 -5104 www.bb-elec.com orders@bb-elec.com support@bb-elec.com European Headquarters: W estlink C om m ercial P ark O ranm ore C o. G alw a y Ireland + 353 91 79244 4 F ax + 3 53 91 79 2445 www.bb-europe.com orders@bb-europe.com support@bb-europe.com