PCI-1243U

PCI-1243U 4-axis Low Cost Stepping Motor Control Universal PCI Card Features  4 axis stepping motor control  PCI universal bus  Up to 400 k pulse output rate  T-curve acceleration/deceleration  Pulse/Dir and CW/CCW pulse output mode  Up 24-bit step count  Opto-Isolated Digital input and output  Up to 1,500 Vrms system isolation  BoardIDTM switch Introduction PCI-1243U is a 4-axis intelligent stepping motor control card with universal PCI interface. The card’s PCD-4541 motion controller can execute a variety of motion-control commands. For advanced applications, we supply a DLL so that programs can be created for the Microsoft® Windows® environment. PCI-1243U is a cost-effective solution for PCI based motion control. Each axis can be controlled directly through the card’s I/O registers. However, use of the card’s high-level DLL driver is recommended. With the DLL driver, you can easily link to VC++®, Visual Basic® or BCB. Specifications Pulse Type Motion Control          Motor Driver Support Number of Axes Max. Output Speed Step Count Range Pulse Output Type Position Counters Home Modes Velocity Profiles Local I/O Machine Interfaces: General Inputs: General Outputs: Stepping 4 400 kpps 0 ~ 16, 777, 215 Pulse/Direction, CW/CCW ±16, 777, 215 4 T or S-curve acceleration/deceleration PEL x 4, NEL x 4, ORG x 4, SLD x 4, EMG x 1 8 8 General PCI V2.2 CE 1 x DB-62 female 175 x 100 mm (6.9" x 3.9") Typical: 5 V @ 340 mA Max: 5 V @ 500 mA mA  Storing Humidity 5 ~ 95% RH, non-condensing (IEC 68-2-3)  Operating Temperature 0 ~ 60° C (32 ~ 140° F)  Storing Temperature -20 ~ 80° C (-4 ~ 170° F)      Bus Type Certifications Connectors Dimensions Power Consumption Ordering Information      PCI-1243U PCL-10162-1 PCL-10162-3 ADAM-3962 ADAM-3943 4-axis Stepping Motor Control card DB-62 Cable Assembly, 1 M DB-62 Cable Assembly, 3 M DB-62 wiring terminal with DIN-rail mounting PCI-1243U wiring board with LED Isolated Digital Input  Channels  Input Voltage 8 Logic 0: 1 V Logic 1: 12 V (24 V max.)  Isolation Protection 3,750 VRMS  Opto-Isolator Response 25μs  Input Resistance 4.7 kW Isolated Digital Output       Channels Output Type Isolation Protection Output Voltage Sink Current Opto-Isolator Response 8 Sink (NPN) 3,750 VRMS 5 ~ 30 VDC 200 mA max./channel; 1.1 A max. total 25μs Online Download www.advantech.com/products