PCL-10220M-2

AMAX-2050KW AMAX-2050FCE NEW GX2-400 Machine Control Box with AMONet Interface GX2-400 Machine Control Box with AMONet and CAN Interface Features  Onboard AMD Geode™ GX2 processor, up to 256 MB onboard DDR  128 Kbyte battery backup RAM  Supports AMONet series for remote motion control and data acquisition  2 x RS-232 ports and 1 x RS-422/485 port with automatic flow control  1 x 10/100 Base-T RJ-45 port and 2 x USB ports  4 x programmable diagnostic LEDs and 1 x buzzer  KW ready solution (AMAX-2050KW only)  Suitable for DIN-rail mounting AMAX-2050FCE AMAX-2050KW RoHS 2002/95/EC COMPLIANT Introduction Advantech's AMAX-2050KW is a Pentium® III grade platform with an onboard AMONet controller, which is designed for embedded machine automation applications. From the peripheral point of view, with one AMONet master port AMAX-2050KW can control up to 2048 I/O points or 256 axes. Also, AMAX-2050KW offers one LAN and dual USB interfaces to fulfill user’s various communication needs. In addition, it also offers two RS-232 and one RS-422/485 communication ports with automatic flow control functionality. AMAX-2050KW supports Windows CE .NET, which offers a pre-configured image with optimized onboard device drivers. MULTIPROG supports all IEC 61131-3 programming languages. Depending on the task to be handled, your experience and company standards, you may choose one of the five standardized programming languages. AMAX-2050FCE comes with a built-in CAN interface to ensure data transmission and support for the DLL library, making it suitable for WinCE development. Specifications General  Certifications CE  Dimensions (L x W x H) 125 x 47.6 x 151 mm (4.9" x 1.8" x 5.9")  Power Consumption Typical: 8 W Max.:15 W  Power Supply Min. 15 W (9 ~ 36 VDC) (e.g +24 V @ 625 mA)  OS Support Windows® CE .NET 5.0 Communications  Serial Ports  Serial Port Speed  LAN  USB Ports  AMONet Rings  CAN Port 2 x RS-232 and 1 x RS-422/485 Isolation with automatic RS-485 data flow control RS-232: 50 ~ 115.2 kbps RS-422/485: 50 ~ 921.6 kbps max. 1 x 10/100 Base-T RJ-45 ports (support RTL 8100B LAN chip) 2 x USB, UHCI, Rev. 1.1 compliant 1 x isolated AMONet, connect up to 2048 digital I/O channels or 64 motion axes 1 (AMAX-2050FCE) System Hardware  CPU  Battery Backup RAM  Indicators  Keyboard/Mouse  Memory  Storage  VGA  Watchdog Timer AMD Geode GX2-400 512 KB Power, CF, alarm for RAM backup battery and 4 x programmable diagnostic LEDs 1 x PS/2 256 MB DDR onboard SSD: 1 x internal (Master Card) & 1 x external (Slave Module) type I/II CompactFlash® slot DB15 VGA connector Programmable Environment  Operating Humidity 5 ~ 85% RH, non-condensing (refer to IEC 68-2-3)  Operating Temperature 0 ~ 50° C Motion Control I/O Modules AMAX-2050KW AMAX-2050FCE System Architecture AMONet Slave # 1 Slave # 2 Slave # Last *Slave can be Motion or Digital I/O modules **Last Slave module needs [Terminator] setting Ordering Information             AMAX-2050KW AMAX-2050FCE AMAX-2241/PMA AMAX-2242/J2S AMAX-2243/YS2 AMAX-2752SY AMAX-2754SY AMAX-2756SY PCL-10220M-2 PCL-10150M-2 MPROG-BAS33 MPROG-ADV33 Machine Control Box w/ AMONet Interface Machine Control Box w/ AMONet and CAN Interface 4-axis AMONet Motion Module for Panasonic Minas A 4-axis AMONet Motion Module for Mitsubishi MR-J2S 4-axis AMONet Motion Module for Yaskawa Sigma-II 32-ch Isolated Digital Input AMONet Module 32-ch Isolated Digital Output AMONet Module 16/16-ch Isolated Digital I/O AMONet Module 20-pin SCSI Cable, 2 m 50-pin SCSI Cable, 2 m KW Multiprog v3.3 (128-byte I/O) KW Multiprog v3.3 (64k-byte I/O) Online Download www.advantech.com/products