PCL-10502

PCL-1050 Series Features Industrial Wiring Accessories § Convenient wiring accessories for use with I/O cards § Converts two 20-pin dual-in-line male connectors into one DB-37 female connector § Converts two 20-pin flat ribbon cables into one DB-37 connector § Connects DI/DO channels from the card to the back panel of a PC PC-10502 PC-10503 PC-10501 Introduction The PCL-1050 series consists of a set of convenient wiring accessories designed for use with I/O cards such as PCL-711, PCL-812PG, PCL-818H and PCL-720+. With this set, field wiring becomes much easier. The set includes the following items: PCL-10501 adapter, analog I/O channels to DB-37 connector PCL-10502 digital I/O port extender with ribbon cables PCL-10503 adapter, dual flat cables to DB-37 connector PCL-10501 This adapter converts two 20-pin dual-in-line male connectors into a DB-37 female connector in a pin-to-pin fashion. It is designed for applications which require shielded cables for analog I/O channels on PC-LabCards. CN3 CN1-2 CN1-4 CN1-6 CN1-8 CN1-10 CN1-12 CN1-14 CN1-16 CN1-18 CN1-20 CN2-2 CN2-4 CN2-6 CN2-8 CN2-10 CN2-12 CN2-14 CN2-16 CN2-18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 CN1-1 CN1-3 CN1-5 CN1-7 CN1-9 CN1-11 CN1-13 CN1-15 CN1-17 CN1-19 CN2-1 CN2-3 CN2-5 CN2-7 CN2-9 CN2-11 CN2-13 CN2-15 PCL-10503 This adapter, with dual 20-pin male headers and a female DB-37 connector, converts two 20-pin flat ribbon cables into a DB-37 connector. It can be used with digital or analog channels. CN3 CN1-1 CN1-3 CN1-5 CN1-7 CN1-9 CN1-11 CN1-13 CN1-15 CN1-17 CN1-19 CN2-1 CN2-3 CN2-5 CN2-7 CN2-9 CN2-11 CN2-13 CN2-15 CN2-17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 CN1-2 CN1-4 CN1-6 CN1-8 CN1-10 CN1-12 CN1-14 CN1-16 CN1-18 CN1-20 CN2-2 CN2-4 CN2-6 CN2-8 CN2-10 CN2-12 CN2-14 CN2-16 PCL-10502 This adapter and two flat ribbon cables can be used to connect the digital input and output channels at the middle of a PC-LabCard™ product to the back panel of a PC. This adapter makes access to digital I/O channels much easier since it only occupies one slot on the back of a PC and there is no need to open the cover of the PC. Two 0.4 m 20-pin flat ribbon cables are provided. CN1 CN3-1 CN3-3 CN3-5 CN3-7 CN3-9 CN3-11 CN3-13 CN3-15 CN3-17 CN3-19 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 CN3-1 CN3-3 CN3-5 CN3-7 CN3-9 CN3-11 CN3-13 CN3-15 CN3-17 CN3-19 CN4-1 CN4-3 CN4-5 CN4-5 CN4-9 CN4-11 CN4-13 CN4-15 CN4-17 CN4-19 1 3 5 7 9 11 13 15 17 19 CN2 2 4 6 8 10 12 14 16 18 20 CN4-1 CN4-3 CN4-5 CN4-7 CN4-9 CN4-11 CN4-13 CN4-15 CN4-17 CN4-19 Ordering Information § PCL-10501 § PCL-10502 § PCL-10503 Adapter, analog I/O channels to DB-37 connector Digital I/O port extender with ribbon cables Adapter, dual flat cables to DB-37 connector 7-2 4 Signal Conditioning Modules and Terminal Boards