PCL-818L

PCL-818HD/HG PCL-818L Features  Programmable gain 100 kS/s, 12-bit, 16-ch ISA Multifunction Card 40 kS/s, 12-bit, 16-ch ISA Multifunction Card  16-ch single-ended or 8-ch differential analog input  12-bit A/D converter, with up to 100 kHz sampling rate  Automatic channel/gain scanning  Onboard FIFO memory (1,024 samples, PCL-818HD/HG only)  One 12-bit analog output channel  16-ch digital input and 16-ch digital output  Onboard programmable counter RoHS 2002/95/EC COMPLIANT Introduction The PCL-818L series was designed for entry-level models to the PCL-818 series. The cards have been designed with the cost-sensitive customer in mind, but still offers the same functions as the rest of the series, except that they have a 40 kHz sampling rate and only accepts bipolar inputs. They are fully software and connector compatible with the PCL-818HD and PCL-818HG. This lets you upgrade your applications to these higher performance cards without hardware or software changes. The PCL-818LS bundle consists of the PCL-818L card, the PCLD-8115 wiring terminal board and a DB37 cable assembly. The PCLD-8115 accommodates onboard passive signal conditioning components (resistors and capacitors), allowing you to easily implement a low-pass filter, a voltage attenuator or a 4 ~ 20 mA voltage converter. Specifications Analog Input  Channels  Resolution  Max. Sampling Rate      16 single-ended / 8 differential 12 bits 100 kS/s for all input ranges (PCL-818HD/HG only) 40 kS/s for all input ranges (PCL-818L only) FIFO Size 1,024 samples Overvoltage Protection 30 Vp-p Input Impedance 10 MW Sampling Modes Software, pacer or external (V, software programmable) Input Range ±10 N/A 0.1 ±5 0 ~ 10 0.1 ±2.5 0~5 0.2 ±1.25 0 ~ 2.5 0.2 ±0.625 0 ~ 1.25 0.4 Digital Input  Channels  Compatibility  Input Voltage 16 5 V/TTL Logic 0: 0.8 V max. Logic 1: 2.0 V min. Digital Output  Channels  Compatibility  Output Voltage  Output Capability 16 5 V/TTL Logic 0: 0.4 V max. Logic 1: 2.4 V min. Sink: 8 mA Source: -0.4 mA PCL-818L/818HD Bipolar Unipolar* Accuracy (% of FSR ±1LSB) Timer/Counter     Channels A/D Pacer Max. and Min. Rates Counter 1 32-bit with 10 MHz or 1 MHz time base 2.5 MHz and 0.00023 Hz One 16-bit counter with 100 kHz time base * Note: PCL-818L doesn’t support unipolar input range. PCL-818HG Bipolar Unipolar Accuracy (% of FSR ±1LSB) ±10 N/A 0.1 ±5 0 ~ 10 0.1 ±1 N/A 0.2 ±0.5 0~1 0.2 ±0.1 N/A 0.4 ±0.05 0 ~ 0.1 0.4 ±0.01 N/A 0.8 ±0.005 0 ~ 0.01 0.8 General  Power Consumption +5 V @ 210 mA typical, 500 mA max. +12 V @ 20 mA typical, 100 mA max. -12 V @ 20 mA typical, 40 mA max. I/O Connector 1 x DB37 female 2 x 20-pin box header Dimensions (L x H) 155 x 100 mm (6.1" x 3.9") Operating Temperature 0 ~ 50° C (32 ~ 122° F) Storage Temperature -20 ~ 65° C (-4 ~ 149° F) Operating Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3) Analog Output     Channels Resolution Output Rate Output Range Internal Reference External Reference 1 12 bits Static update (V, software programmable) Unipolar 0 ~ 5, 0 ~ 10 0 ~ 10, 0 ~ -10      Data Acquisition Boards PCL-818HD/HG PCL-818L Ordering Information          PCL-818HD PCL-818HG PCL-818L PCL-818LS PCL-10137-1 PCL-10137-2 PCL-10137-3 PCLD-8115 PCLD-880 High-performance Half-size Multifunction Card High-performance and High-gain Multi. Card Low-cost High-perform. Half-size Multi. Card PCL-818L w/ PCLD-8115 and DB37 Cable DB37 Cable, 1 m DB37 Cable, 2 m DB37 Cable, 3 m Wiring Board w/ CJC Circuit & One DB37 Cable Wiring Board w/ Two 20-pin Flat Cables & Adapter Pin Assignments Online Download www.advantech.com/products