PCM-9588L-M0A1E

PCM-9588 NEW PCI LVDS DVI CD in TTL VGA Audio Ethernet ATX/AT Power System FAN Intel 910GMLE SATA0 SATA1 LPT IDE COM5, 6 16bit GPIO COM1 ~ 4 USB4, 5 USB0/1 USB2/3 PC/104+ SIR KB/MS Intel® Celeron® M EBX SBC with DVI/ TTL/ VGA/ LVDS/ LAN/ 6 COM/ 2 SATA/ 6 USB2.0 Features       Intel® Celeron® M processor Display Combination: CRT+ LVDS / DVI+ LVDS/ DVI+ CRT/ CRT+ TTL Supports LCD backlight turn-off function 10/100 Mbps Ethernet support, UL60601 Design, GIGA LAN optional 6 COM (Supports Auto flow control), 2 SATA, 6 USB 2.0, 16-bit GPIO ports Supports Embedded Software API and Utility Software APIs: Watchdog SMBus H/W Monitor GPIO Backlight On/Off Brightness CPU Speed System Throttling Utilities: BIOS flash Monitoring Specifications Processor System CPU Front Side Bus L2 Cache Chipset BIOS Technology Max. Capacity Socket CompactFlash LPT RS-232 RS-232/422/485 K/B Mouse USB Audio GPIO IrDA Max. Data Transfer Rate Channel Mode Channel PC/104 Plus Speed Controller Interface Controller VRAM LVDS LCD DVI TTL VGA Dual Independent Display Operating Temperature Operating Humidity Power Type Power Supply Voltage Power Power Consumption Typical (XP) Power Consumption Max, Test in HCT Power Management Battery Output Interval Dimensions (L x W) Top side Bottom side Weight Intel Celeron M 600 MHz Celeron M 1 GHz 400 MHz 400 MHz 512 KB 0 KB Intel 910GMLE + ICH6M Intel 910GMLE + ICH6M Award 4-Mbit Award 4-Mbit DDR2 400 Downwards compatible for DDR2 533/667/800MHz 2 GB 1 x 200-pin SODIMM Card Type I, Type II 1 4 2 (Default RS-422/485, RS-232 by optional request) 1 1 6 x USB 2.0 AC97, Line-in, Line-out, Mic-in, speaker out (R/L) (Support 8W 1 W or 4W 2 W Speaker for Speaker-out) 16-bit general purpose input/output 115kbps (optional by request) shared from COM2 150 MB/s 2 UDMA 33/66/100 1 1 10/100 Mbps (10/100/1000 Mbps optional) (Isolation for UL60601 Compliant) 1 x Realtek RTL8100CL-LF (Optional RTL8110SCL-LF for Giga LAN) 1 x RJ-45 by cable Intel 910GMLE Optimized Shared Memory Architecture up to 128 MB system memory 1 x 48-bit LVDS Yes (Optional by request) Yes, support 18/36-bit TTL (Optional by request) Yes, up to QXGA (2048 x 1536) CRT+ LVDS / DVI+ LVDS/ DVI+ CRT/ CRT+ TTL 0 ~ 60° C (32 ~ 140° F) 95% @ 60° C Relative Humidity AT / ATX ATX: 5 V STB, +5 V ± 5%, ±12 V ± 5%, external 12 V option for LCD Inverter, PCI & PCI-104 Plus AT: 5 V only to boot up, external 12 V option for LCD Inverter, PCI & PC/104 Plus 5 V:3.67 A (C-M M 1 G with DDR2 400 1 GB) 5 V:3.67 A (C-M M 1 G with DDR2 400 1 GB) APM, ACPI Lithium 3 V / 196 mAH System reset Programmable 1 ~ 255 sec 203 x 146 mm (8" x 5.75") The highest is PCI slot (15.4 mm) The highest is CF sochet (9.5 mm) 0.85 kg (1.87 lb) (with Heatsink) Memory SSD I/O Interface SATA EIDE Expansion Slot Ethernet Display Environment Watchdog Timer Physical Characteristics Embedded Single Board Computers All product specifications are subject to change without notice Last updated : 24-Nov-2009 PCM-9588 Board Diagram Intel Celeron-M CPU FSB 400 MHz LVDS Connector 18/24 bits TTl 18/36 bits LVDS DDRII 400 200pin DDRII SODIMM x 1 CRT Ch7307 Optional DS90C3202 Intel GMCH 910GMLE (400 MHz) Analog CRT SDVO DVI Connecter DMI I/F CF Slot IDE1 Connector SATA Connector x 2 Audio Connecter 16-Bit GPIO ALC203 PCA9555PW IDE PCI Bus PCI-104 PLUS ISA Bus ITE8888G SATA x 2 PCI Slot Intel ICH6M 10/100 LAN (RTL8100CL) USB 2.0 x 6 AC97 Isolation LAN Connector I2C USB Connector LPC Interface FWH BIOS LPC Super I/O (SCH3106) Parallel Port Connector COM 5, 6 Connector (RS-422/485 only) SIR PS2 Keyboard/Mouse COM 1~ 4 Connector (Share form COM2) Ordering Information Part No. PCM-9588T-M0A1E CPU L2 Cache Memory Chipset LVDS TTL Yes Yes CRT Yes Yes Yes Yes Yes 10/100M USB DVI LAN Audio 2.0 UL60601 Yes Yes 1 1 1 1 1 Yes Yes Yes Yes Yes 6 6 6 6 6 SATA 2 2 2 2 2 RS- RS-232/ 232 422/485 4 4 4 4 4 2 2 2 2 2 GPIO LPT CF PC/104+ 16 16 16 16 16 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ATX AT Thermal Power Power Solution Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Passive Passive Passive Passive Passive Operating Temp. 0 ~ 60° C 0 ~ 60° C 0 ~ 60° C -20 ~ 80° C -40 ~ 85° C C-M 512 KB SO-DIMM 600 MHz C-M PCM-9588F-S0A1E 0 KB SO-DIMM 1.0 GHz C-M 600 PCM-9588L-M0A1E 512 KB SO-DIMM MHz C-M Bundle PCM-9588Z-1GM0A1E 512 KB 600 MHz 1 GB C-M Boudle PCM-9588Z2-1GS0A1E 0 KB 1GHz 1 GB *PCM-9588 has insolation feature in LAN for UL60601. 910GMLE 910GMLE 48bit 910GMLE 48bit 910GMLE 910GMLE 48bit Optional Accessories Part No. PCM-10586-9588E 1703100260 CF-HDD-ADP Description Wiring kit for PCM-9588 USB cable CompactFlash 50-pin to IDE 44-pin adapter Packing List Part No. 9689000002 Description PCM-9588 SBC Mini Jumper Pack Startup Manual Utility CD WIRE ATX-20P (M)/12P (F)+3P-2.0 mm 15 cm Power Cable 12P/Big 4P x 2 10 cm Quantity 1 1 1 1 1 1 1700001112 1700006196 Online Download www.advantech.com/products Value-Added Software Services Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications. Software APIs Control General Purpose Input/Output is a flexible parallel interface that allows a variety of custom connections. It allows users to monitor the level of signal input or set the output status to switch on/off a device. Our API also provides Programmable GPIO, which allows developers to dynamically set the GPIO input or output status. SMBus is the System Management Bus defined by Intel® Corporation in 1995. It is used in personal computers and servers for low-speed system management communications. The SMBus API allows a developer to interface a embedded system environment and transfer serial messages using the SMBus protocols, allowing multiple simultaneous device control. I2C is a bi-directional two wire bus that was developed by Philips for use in their televisions in the 1980s. The I2C API allows a developer to interface with an embedded system environment and transfer serial messages using the I2C protocols, allowing multiple simultaneous device control. Monitor A watchdog timer (WDT) is a device that performs a specific operation after a certain period of time if something goes wrong and the system does not recover on its own. A watchdog timer can be programmed to perform a warm boot (restarting the system) after a certain number of seconds. GPIO Watchdog SMBus Hardware Monitor The Hardware Monitor (HWM) API is a system health supervision API that inspects certain condition indexes, such as fan speed, temperature and voltage. I2C Hardware Control The Hardware Control API allows developers to set the PWM (Pulse Width Modulation) value to adjust fan speed or other devices; it can also be used to adjust the LCD brightness. Display Power Saving The Brightness Control API allows a developer to interface with an embedded device to easily control brightness. Brightness Control CPU Speed Make use of Intel SpeedStep technology to reduce power power consumption. The system will automatically adjust the CPU Speed depending on system loading. The Backlight API allows a developer to control the backlight (screen) on/off in an embedded device. Backlight System Throttling Refers to a series of methods for reducing power consumption in computers by lowering the clock frequency. These APIs allow the user to lower the clock from 87.5% to 12.5%. Software Utilities The BIOS Flash utility allows customers to update the flash ROM BIOS version, or use it to back up current BIOS by copying it from the flash chip to a file on customers’ disk. The BIOS Flash utility also provides a command line version and API for fast implementation into customized applications. The embedded application is the most important property of a system integrator. It contains valuable intellectual property, design knowledge and innovation, but it is easily copied! The Embedded Security ID utility provides reliable security functions for customers to secure their application data within embedded BIOS. The Monitoring utility allows the customer to monitor system health, including voltage, CPU and system temperature and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused. The eSOS is a small OS stored in BIOS ROM. It will boot up in case of a main OS crash. It will diagnose the hardware status, and then send an e-mail to a designated administrator. The eSOS also provides remote connection: Telnet server and FTP server, allowing the administrator to rescue the system. Flash Lock is a mechanism that binds the board and CF card (SQFlash) together. The user can “Lock” SQFlash via the Flash Lock function and “Unlock” it via BIOS while booting. A locked SQFlash cannot be read by any card reader or boot from other platforms without a BIOS with the “Unlock” feature. BIOS Flash eSOS Embedded Security ID Flash Lock Monitoring Embedded Single Board Computers All product specifications are subject to change without notice Last updated : 24-Nov-2009