User Manual
SOM-7565 A2
Copyright
The documentation and the software included with this product are copyrighted 2011
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.
Acknowledgements
Intel® and Pentium® are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For outof-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
SOM-7565 A2 User Manual
Part No. 2006756510
Edition 1
Printed in Taiwan
August 2013
ii
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products.
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FM
This equipment has passed the FM certification. According to the National Fire Protection Association, work sites are classified into different classes, divisions and
groups, based on hazard considerations. This equipment is compliant with the specifications of Class I, Division 2, Groups A, B, C and D indoor hazards.
Technical Support and Assistance
1.
2.
Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,
etc.)
– A complete description of the problem
– The exact wording of any error messages
iii
SOM-7565 A2 User Manual
Warnings, Cautions and Notes
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's
instructions.
Note!
Notes provide optional additional information.
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advantech.com
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
SOM-7565 A2 CPU Module
1 x Heat spreader (1960055344N001)
Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
Read these safety instructions carefully.
Keep this User Manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
SOM-7565 A2 User Manual
iv
9.
Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
v
SOM-7565 A2 User Manual
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive electronic components.
SOM-7565 A2 User Manual
vi
Contents
Chapter
1
General Information ............................1
1.1
1.2
1.4
Introduction ............................................................................................... 2
Specifications ............................................................................................ 2
1.2.1 Board Information ......................................................................... 2
1.2.2 System Information ....................................................................... 2
1.2.3 Display .......................................................................................... 2
1.2.4 Expansion Interface ...................................................................... 2
1.2.5 I/O ................................................................................................. 3
1.2.6 iManager 2.0 ................................................................................. 3
1.2.7 Mechanical and Environmental Specification ............................... 3
Functional Block Diagram ......................................................................... 4
Figure 1.1 Functional Block Diagram........................................... 4
SOM-7565 A2 Type 10 Pin Assignment ................................................... 4
2
Mechanical Information ......................7
2.1
Board Information...................................................................................... 8
Figure 2.1 Board chips identify - Front......................................... 8
Figure 2.2 Board chips identify - Back ......................................... 9
Mechanical Drawing.................................................................................. 9
Figure 2.3 Board Mechanical Drawing - Front ............................. 9
Figure 2.4 Board Mechanical Drawing - Back ........................... 10
1.3
Chapter
2.2
Chapter
3
BIOS ....................................................11
3.3
Figure 3.1 BIOS Setup Utility Main Screen................................ 12
Entering Setup ........................................................................................ 12
Hot / Operation key ................................................................................. 12
3.2.1 Left / Right Key ........................................................................... 12
3.2.2 ESC key ...................................................................................... 12
3.2.3 Enter Key .................................................................................... 12
3.2.4 + / - key ....................................................................................... 13
3.2.5 F1 key ......................................................................................... 13
3.2.6 F2 key ......................................................................................... 13
3.2.7 F3 key ......................................................................................... 13
3.2.8 F4 key ......................................................................................... 13
Exit BIOS Setup Utility ............................................................................ 13
4
S/W Introduction & Installation ........15
4.1
4.2
4.3
S/W Introduction...................................................................................... 16
Driver Installation .................................................................................... 16
4.2.1 Windows XP / Windows 7 Driver Setup ...................................... 16
4.2.2 Other OS..................................................................................... 16
Advantech iManager ............................................................................... 16
Appendix A
Watchdog Timer ................................19
A.1
Programming the Watchdog Timer ......................................................... 20
3.1
3.2
Chapter
vii
SOM-7565 A2 User Manual
Appendix B
Programming GPIO........................... 21
B.1
GPIO Register......................................................................................... 22
Appendix C
System Assignments........................ 23
C.1
System I/O Ports..................................................................................... 24
Table C.1: System I/O ports....................................................... 24
DMA Channel Assignments .................................................................... 25
Table C.2: DMA channel assignments....................................... 25
Interrupt Assignments ............................................................................. 25
Table C.3: Interrupt assignments............................................... 25
1st MB Memory Map............................................................................... 26
Table C.4: 1st MB memory map ................................................ 26
C.2
C.3
C.4
SOM-7565 A2 User Manual
viii
Chapter
1
1
General Information
This chapter gives background
information on the SOM-7565 A2
CPU Computer on Module
Sections include:
Introduction
Specification
Functional Block Diagram
SOM-7565 A2 Type 10 Pin
Assignment
1.1 Introduction
SOM-7565 A2 is a COM-Express Mini module with pin-out Type 10 that fully complies with the PICMG (PCI Industrial Computer Manufactures Group) COM.0 R2.1
specification. The new CPU module uses an Intel Atom processor N2800/N2600
which contains Intel GFX Core GMA3600 supports full MPEG2, AVC/H.264, and VC1 HW decode/acceleration, with NM10 chipset which supports advance expansion
interface like PCI Express and I/O interface like Serial ATA (SATA), USB2.0. In a
COM-Mini form factor of 84mm x 55mm, SOM-7565 A2 provides a balance of high
performance and easy to integrate solution for customers’ applications by utilizing a
plug-in CPU module on an application-specific customer solution board. With
advanced interfaces like PCI Express, SATA, USB 2.0, and HDMI/DVI/DP interfaces,
it provides not only high speed/performance but also small pin-count that user easy
to integrate in to system. SOM-7565 A2 offers design partners more choices for their
own applications needing higher computing speeds while maintaining a compact
form factor.
1.2 Specifications
1.2.1 Board Information
Pin Definition: PICMG COM.0 R2.1 Type 10 pin-out definition
Form Factor: PICMG COM.0 R2.1 Mini Module 84 x 55 mm
1.2.2 System Information
CPU: Onboard Intel® Atom N2600 1.6GHz/N2800 1.86GHz processor, 1MB L2
Cache
Chipset: Intel® NM10 Express Chipset
Memory: On board DDR3 800MHz 2GB memory for N2600
Up to 4GB on board DDR3 1066MHz memory for N2800
BIOS: AMI UEFI 16Mbit SPI BIOS
Power management: Supports power saving modes including Normal /
Standby / Suspend modes. ACPI 2.0 compliant
1.2.3 Display
Graphic Core: Intel Atom integrated GMA3600 400MHz, supports DX9,
OGL3.0, and MPEG2, AVC/H.264, VC-1 HW decode/acceleration
LVDS: Supports 1-CH 18-bit, resolution up to 1366 x 768
HDMI/DVI/DP: Supports 1 port HDMI (default), DVI, or DP multiplexed (BIOS
modification needed).
Resolution: HDMI/DVI up to 1920 x 1200
DP up to 1600 x 1200
Dual Display: Supports LVDS + HDMI/DVI/DP
1.2.4 Expansion Interface
PCI Express x1: 3 ports or 4 ports (BOM option), PCI Express 1.0a compliant
Audio Interface: Intel HD Audio interface
LPC Bus
SMBus
I2C Bus: Up to 400KHz
SPI: Supports SPI BIOS only
SOM-7565 A2 User Manual
2
1.2.6 iManager 2.0
Refer to section 4.3.
1.2.7 Mechanical and Environmental Specification
Dimensions: 84 x 55 mm (3.3" x 2.17")
Power Type and Supply Voltage:
ATX: +12V and +5VSB (standby power)
AT: +12V
Power Requirement:
Test Condition: Win7 32-bit standard, under 12V and 5VSB input power supply.
Temperature Specification:
Operating: 0 ~ 60°C (32 ~ 140°F)
Storage: -40 ~ 85°C (-40 ~ 185°F)
Humidity Specification:
Operating: 40°C@95% relative humidity, non-condensing
Storage: 60°C@95%relative humidity, non-condensing
EMC Compliance:
CE/FCC Class B
3
SOM-7565 A2 User Manual
General Information
Onboard Flash: Support onboard flash 8GB MLC, 4GB MLC, or 4GB SLC
Ethernet: Intel 82574L Gigabit LAN controller supports 10/100/1000 Mbps
Speed
SATA: Supports 1 port, SATAII 300 Gb/s compliant (2 port optional while
remove onboard flash)
USB Interface: Supports 8 ports USB 2.0
Serial Port: Supports 2 ports 2-wire serial port
Express Card: 2 ports
Panel Control: Supports panel backlight on/off control, brightness control
Thermal Protection: Supports thermal shutdown or CPU throttling
Watchdog Timer: 65536 level timer interval, from 0~65535 sec, multi-level,
multi-option watchdog timer
Smart Fan: 1 port
GPIO: 8 GPIO
Hardware Monitor: Vin, 5VSB, CMOS
Chapter 1
1.2.5 I/O
1.3 Functional Block Diagram
Block Diagram
Up to 4GB Onboard Memory
IMVP 7
DDR3 800/1066
Intel Atom
N2600/ N2800
Single Channel 18-bit LVDS
1 HDMI/DVI/DP Port
DMI
HDA
8 USB 2.0
3 PCIe x1
SATAII
NM10
Onboard Flash
Giga LAN
82574L
1 PCIe x1
Ethernet
Connector Row A,B
1 SATA II
LPC BUS
WDT / GPIO / I2C
iManager
Serial Port/ FAN
SMBus
SPI Bus
SPI BIOS
Figure 1.1 Functional Block Diagram
1.4 SOM-7565 A2 Type 10 Pin Assignment
This section gives SOM-7565 A2 pin assignment on COM Express connector which
compliant with COMR.0 R2.1 Type 10 pin-out definitions. More details about how to
use these pins and get design reference, please contact to Advantech for design
guide, checklist, reference schematic, and other hardware/software supports.
Row A
Row B
A1
GND (FIXED)
B1
GND (FIXED)
A2
GBE0_MDI3-
B2
GBE0_ACT#
A3
GBE0_MDI3+
B3
LPC_FRAME#
A4
GBE0_LINK100#
B4
LPC_AD0
A5
GBE0_LINK1000#
B5
LPC_AD1
A6
GBE0_MDI2-
B6
LPC_AD2
A7
GBE0_MDI2+
B7
LPC_AD3
A8
GBE0_LINK#
B8
LPC_DRQ0#
A9
GBE0_MDI1-
B9
LPC_DRQ1#
A10
GBE0_MDI1+
B10
LPC_CLK
A11
GND (FIXED)
B11
GND (FIXED)
A12
GBE0_MDI0-
B12
PWRBTN#
A13
GBE0_MDI0+
B13
SMB_CK
A14
GBE0_CTREF
B14
SMB_DAT
A15
SUS_S3#
B15
SMB_ALERT#
A16
SATA0_TX+
B16
SATA1_TX+ (Optional)
SOM-7565 A2 User Manual
4
SATA0_TX-
B17
SATA1_TX- (Optional)
A18
SUS_S4#
B18
SUS_STAT#
A19
SATA0_RX+
B19
SATA1_RX+ (Optional)
SATA0_RX-
B20
SATA1_RX- (Optional)
A21
GND (FIXED)
B21
GND (FIXED)
A22
RSVD
B22
RSVD
A23
RSVD
B23
RSVD
A24
SUS_S5#
B24
PWR_OK
A25
RSVD
B25
RSVD
A26
RSVD
B26
RSVD
A27
BATLOW#
B27
WDT
A28
SATA_ACT#
B28
N/A
A29
HDA_SYNC
B29
HDA_SDIN1
A30
HDA_RST#
B30
HDA_SDIN0
A31
GND (FIXED)
B31
GND (FIXED)
A32
HDA_BITCLK
B32
SPKR
A33
HDA_SDOUT
B33
I2C_CK
A34
BIOS_DIS0#
B34
I2C_DAT
A35
THRMTRIP#
B35
THRM#
A36
USB6-
B36
USB7-
A37
USB6+
B37
USB7+
A38
USB_6_7_OC#
B38
USB_4_5_OC#
A39
USB4-
B39
USB5-
A40
USB4+
B40
USB5+
A41
GND (FIXED)
B41
GND (FIXED)
A42
USB2-
B42
USB3-
A43
USB2+
B43
USB3+
A44
USB_2_3_OC#
B44
USB_0_1_OC#
A45
USB0-
B45
USB1-
A46
USB0+
B46
USB1+
A47
VCC_RTC
B47
EXCD1_PERST#
A48
EXCD0_PERST#
B48
EXCD1_CPPE#
A49
EXCD0_CPPE#
B49
SYS_RESET#
A50
LPC_SERIRQ
B50
CB_RESET#
A51
GND (FIXED)
B51
GND (FIXED)
A52
RSVD
B52
RSVD
A53
RSVD
B53
RSVD
A54
GPI0
B54
GPO1
A55
RSVD
B55
RSVD
A56
RSVD
B56
RSVD
A57
GND
B57
GPO2
A58
PCIE_TX3+
B58
PCIE_RX3+
A59
PCIE_TX3-
B59
PCIE_RX3-
A60
GND (FIXED)
B60
GND (FIXED)
A61
PCIE_TX2+
B61
PCIE_RX2+
A62
PCIE_TX2-
B62
PCIE_RX2-
A63
GPI1
B63
GPO3
A64
PCIE_TX1+
B64
PCIE_RX1+
5
SOM-7565 A2 User Manual
General Information
A20
Chapter 1
A17
A65
PCIE_TX1-
B65
PCIE_RX1-
A66
GND
B66
WAKE0#
A67
GPI2
B67
WAKE1#
A68
PCIE_TX0+
B68
PCIE_RX0+
A69
PCIE_TX0-
B69
PCIE_RX0-
A70
GND (FIXED)
B70
GND (FIXED)
A71
LVDS_A0+
B71
DDI0_PAIR0+
A72
LVDS_A0-
B72
DDI0_PAIR0-
A73
LVDS_A1+
B73
DDI0_PAIR1+
A74
LVDS_A1-
B74
DDI0_PAIR1-
A75
LVDS_A2+
B75
DDI0_PAIR2+
A76
LVDS_A2-
B76
DDI0_PAIR2-
A77
LVDS_VDD_EN
B77
N/A
A78
LVDS_A3+
B78
N/A
A79
LVDS_A3-
B79
LVDS_BKLT_EN
A80
GND (FIXED)
B80
GND (FIXED)
A81
LVDS_A_CK+
B81
DDI0_PAIR3+
A82
LVDS_A_CK-
B82
DDI0_PAIR3-
A83
LVDS_I2C_CK
B83
LVDS_BKLT_CTRL
A84
LVDS_I2C_DAT
B84
VCC_5V_SBY
A85
GPI3
B85
VCC_5V_SBY
A86
RSVD
B86
VCC_5V_SBY
A87
RSVD
B87
VCC_5V_SBY
A88
PCIE0_CK_REF+
B88
BIOS_DIS1#
A89
PCIE0_CK_REF-
B89
DD0_HPD
A90
GND (FIXED)
B90
GND (FIXED)
A91
SPI_POWER
B91
N/A
A92
SPI_MISO
B92
N/A
A93
GPO0
B93
N/A
A94
SPI_CLK
B94
N/A
A95
SPI_MOSI
B95
DDI0_DDC_AUX_SEL
A96
N/A
B96
RSVD
A97
TYPE10#
B97
SPI_CS#
A98
RS1_TX
B98
DDI0_CTRLCLK_AUX+
A99
RS1_RX
B99
DDI0_CTRLDATA_AUX-
A100
GND (FIXED)
B100
GND (FIXED)
A101
RS2_TX
B101
FAN_PWMOUT
A102
RS2_RX
B102
FAN_TACHIN
A103
LID#
B103
SLEEP#
A104
VCC_12V
B104
VCC_12V
A105
VCC_12V
B105
VCC_12V
A106
VCC_12V
B106
VCC_12V
A107
VCC_12V
B107
VCC_12V
A108
VCC_12V
B108
VCC_12V
A109
VCC_12V
B109
VCC_12V
A110
GND (FIXED)
B110
GND (FIXED)
SOM-7565 A2 User Manual
6
Chapter
2
2
Mechanical
Information
This chapter gives mechanical
information on the SOM-7565 A2
CPU Computer on Module
Sections include:
Board Information
Mechanical Drawing
2.1 Board Information
The figures below indicate the main chips on SOM-7565 A2 Computer-on-Module.
Please aware of these positions when designing the customer’s own carrier board to
avoid mechanical and thermal problems.
Intel Atom N2600 or N2800
DDR3 Memory
Intel NM10 Chipset
Figure 2.1 Board chips identify - Front
SOM-7565 A2 User Manual
8
Onboard SSD
Figure 2.2 Board chips identify - Back
2.2 Mechanical Drawing
For more detail about 2D/3D models, please find on Advantech COM support service
website http://com.advantech.com.
Figure 2.3 Board Mechanical Drawing - Front
9
SOM-7565 A2 User Manual
Mechanical Information
COM Express Connector
Chapter 2
DDR3 Memory
Figure 2.4 Board Mechanical Drawing - Back
SOM-7565 A2 User Manual
10
Chapter
3
BIOS
Sections include:
Entering Setup
Hot/Operation key
Exit BIOS Setup Utility
3
AMI BIOS has been integrated into many motherboards for over a decade. With the
AMI BIOS Setup Utility, users can modify BIOS settings and control various system
features. This chapter describes the basic navigation of the BIOS Setup Utility.
Figure 3.1 BIOS Setup Utility Main Screen
AMI BIOS ROM has a built-in BIOS Setup Utility that allows users to modify the basic
system configuration. This information is stored in flash ROM so it retains the Setup
information when the power is turned off.
3.1 Entering Setup
Turn on the computer and then press or to enter BIOS Setup Utility.
3.2 Hot / Operation key
When users first enter the BIOS Setup Utility, users will enter the Main setup screen.
Users can always hot operation key to configure item setting.
3.2.1 Left / Right Key
Use these keys to switch sub-page or tab.
3.2.2 ESC key
Use this key to return previous page or exit this page.
3.2.3 Enter Key
Use this key to enter sub-page or change this item options.
SOM-7565 A2 User Manual
12
Chapter 3
3.2.4 + / - key
Use this key to switch item option.
3.2.5 F1 key
Use this key to display the help txt of this item.
3.2.6 F2 key
Use this key to load previous all of item setting.
BIOS
3.2.7 F3 key
Use this key to load default setting all of items.
3.2.8 F4 key
Use this key to save and exit BIOS Setup Utility..
3.3 Exit BIOS Setup Utility
Switch the Exit tab of BIOS Setup Utility and select "Save changes and Exit". The
system would be restart or boot up continue. There are several exit methods let user
selected. Or use F4 key to exit BIOS Setup Utility.
13
SOM-7565 A2 User Manual
SOM-7565 A2 User Manual
14
Chapter
4
4
S/W Introduction &
Installation
Sections include:
S/W Introduction
Driver Installation
Advantech iManger
4.1 S/W Introduction
The mission of Advantech Embedded Software Services is to “Enhance quality of life
with Advantech platforms and Microsoft Windows embedded technology." We enable
Windows Embedded software products on Advantech platforms to more effectively
support the embedded computing community. Customers are freed from the hassle
of dealing with multiple vendors (Hardware suppliers, System integrators, Embedded
OS distributor) for projects. Our goal is to make Windows Embedded Software solutions easily and widely available to the embedded computing community.
4.2 Driver Installation
The Intel Chipset Software Installation (CSI) utility installs the Windows INF files that
outline to the operating system how the chipset components will be configured.
4.2.1 Windows XP / Windows 7 Driver Setup
To install the drivers please connect to internet and browse the website http://support.advantech.com.tw and download the drivers that you want to install and follow
Driver Setup instructions to complete the installation.
4.2.2 Other OS
To install the drivers for Other Windows OS or Linux, please connect to internet and
browse the browse the website http://support.advantech.com.tw to download the
setup file.
4.3 Advantech iManager
Advantech's platforms come equipped with iManager, a micro controller that provides
embedded features for system integrators. Embedded features have been moved
from the OS/BIOS level to the board level, to increase reliability and simplify integration. iManager runs whether the operating system is running or not; it can count the
boot times and running hours of the device, monitor device health, and provide an
advanced watchdog to handle errors just as they happen. iManager also comes with
a secure & encrypted EEPROM for storing important security key or other customer
define information. All the embedded functions are configured through API and provide corresponding utilities to demonstrate. These APIs comply with PICMG EAPI
(Embedded Application Programmable Interface) specification and unify in the same
structures. It makes these embedded features easier to integrate, speed up developing schedule, and provide the customer's software continuity while upgrade hardware. More detail of how to use the APIs and utilities, please refer to Advantech
iManager 2.0 Software API User Manual.
SOM-7565 A2 User Manual
16
GPIO
Monitor
General Purpose Input/Output is a flexible parallel interface
that allows a variety of custom connections. It allows users
to monitor the level of signal input or set the output status to
switch on/off a device. Our API also provides Programmable
GPIO, which allows developers to dynamically set the GPIO
input or output status.
Watchdog
A watchdog timer (WDT) is a device that performs a specific
operation after a certain period of time if something goes wrong
and the system does not recover on its own.
A watchdog timer can be programmed to perform a warm boot
(restarting the system) after a certain number of seconds.
®
SMBus
Hardware
Monitor
I2C is a bi-directional two wire bus that was developed by
Philips for use in their televisions in the 1980s.
The I2C API allows a developer to interface with an embedded
system environment and transfer serial messages using the I2C
protocols, allowing multiple simultaneous device control.
Display
Hardware
Control
The Hardware Monitor (HWM) API is a system health
supervision API that inspects certain condition indexes, such as
fan speed, temperature and voltage.
The Hardware Control API allows developers to set the PWM
(Pulse Width Modulation) value to adjust fan speed or other
devices; it can also be used to adjust the LCD brightness.
Power Saving
Make use of Intel SpeedStep technology to reduce power power
consumption. The system will automatically adjust the CPU
Speed depending on system loading.
The Brightness Control API allows a developer to interface with
an embedded device to easily control brightness.
Brightness
Control
CPU Speed
The Backlight API allows a developer to control the backlight
(screen) on/off in an embedded device.
System
Throttling
Backlight
17
Refers to a series of methods for reducing power consumption in
computers by lowering the clock frequency. These APIs allow the
user to lower the clock from 87.5% to 12.5%.
SOM-7565 A2 User Manual
S/W Introduction & Installation
I2C
SMBus is the System Management Bus defined by Intel
Corporation in 1995. It is used in personal computers and
servers for low-speed system management communications.
The SMBus API allows a developer to interface a embedded
system environment and transfer serial messages using the
SMBus protocols, allowing multiple simultaneous device
control.
Chapter 4
Control
SOM-7565 A2 User Manual
18
Appendix
A
A
Watchdog Timer
This appendix gives you the information about the watchdog timer
programming on the SOM-7565 A2
CPU System on Module
Sections include:
Watchdog Timer Programming
A.1 Programming the Watchdog Timer
Trigger Event
Note
IRQ
IRQ5, 7, 14 (default disable) IRQ can be set in BIOS
NMI
N/A
SCI
Power button event
Power Off
Support
H/W Restart
Support
External WDT
N/A
For details, please refer to iManager & Software API User Manual:
SOM-7565 A2 User Manual
20
Appendix
B
B
Programming GPIO
This Appendix gives the illustration of the General Purpose Input
and Output pin setting.
Sections include:
System I/O ports
B.1 GPIO Register
GPIO Byte Mapping
H/W Pin Name
BIT0
GPO0
BIT1
GPO1
BIT2
GPO2
BIT3
GPO3
BIT4
GPI0
BIT5
GPI1
BIT6
GPI2
BIT7
GPI3
For details, please refer to iManager & Software API User Manual
SOM-7565 A2 User Manual
22
Appendix
C
C
System Assignments
This appendix gives you the information about the system resource
allocation on the SOM-7565 A2
CPU System on Module.
Sections include:
System I/O ports
DMA Channel Assignments
Interrupt Assignments
1st MB Memory Map
C.1 System I/O Ports
Table C.1: System I/O ports
Addr.range(Hex)
Device
0000 - 000F
Direct memory access controller
0000 - 0CF7
PCI bus
0010 - 001F
Motherboard resources
0020 - 0021
Programmable interrupt controller
0022 - 003F
Motherboard resources
0040 - 0043
System timer
0044 - 005F
Motherboard resources
0060 - 0060
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
0061 - 0061
System speaker
0062 - 0062
Microsoft ACPI-Compliant Embedded Controller
0063 - 0063
Motherboard resources
0064 - 0064
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
0065 - 0065
Motherboard resources
0066 - 0066
Microsoft ACPI-Compliant Embedded Controller
0067 - 006F
Motherboard resources
0070 - 0071
System CMOS/real time clock
0072 - 007F
Motherboard resources
0080 - 0080
Motherboard resources
0081 - 0083
Direct memory access controller
0084 - 0086
Motherboard resources
0087 - 0087
Direct memory access controller
0088 - 0088
Motherboard resources
0089 - 008B
Direct memory access controller
008C - 008E
Motherboard resources
008F - 008F
Direct memory access controller
0090 - 009F
Motherboard resources
00A0 - 00A1
Programmable interrupt controller
00A2 - 00BF
Motherboard resources
00C0 - 00DF
Direct memory access controller
00E0 - 00EF
Motherboard resources
00F0 - 00FF
Numeric data processor
01F0 - 01F7
Primary IDE Channel
0274 - 0277
ISAPNP Read Data Port
0279 - 0279
ISAPNP Read Data Port
0378 - 037F
Parallel port (LPT1) N455 CPU only
03B0 - 03BB
Intel(R) Graphic Media Accelerator 3150
03C0 - 03DF
Intel(R) Graphic Media Accelerator 3150
03F6 - 03F6
Primary IDE Channel
03F8 - 03FF
Communications Port (COM1)
0400 - 041F
Intel(R) ICH8 Family SMBus Controller ®C 283E
04D0 - 04D1
Motherboard resources
0500 - 053F
Motherboard resources
0800 - 087F
Motherboard resources
SOM-7565 A2 User Manual
24
0A00 - 0A0F
Motherboard resources
0A79 - 0A79
ISAPNP Read Data Port
0D00 - FFFF
PCI bus
D080 - D087
Intel(R) Graphic Media Accelerator 3150
D400 - D41F
Intel 82567V-3 Gigabit Network Connection
D480 - D49F
Standard Universal PCI to USB Host Controller
D800 - D81F
Intel ICH8 Family USB Universal Host Controller - 2832
D880 - D89F
Intel ICH8 Family USB Universal Host Controller - 2831
DC00 - DC1F
Intel ICH8 Family USB Universal Host Controller - 2830
E080 - E08F
Intel ICH8M 3 port Serial ATA Storage Controller - 2828
E400 - E40F
Intel ICH8M 3 port Serial ATA Storage Controller - 2828
E480 - E483
Intel ICH8M 3 port Serial ATA Storage Controller - 2828
E800 - E807
Intel ICH8M 3 port Serial ATA Storage Controller - 2828
E880 - E883
Intel ICH8M 3 port Serial ATA Storage Controller - 2828
EC00 - EC07
Intel ICH8M 3 port Serial ATA Storage Controller - 2828
FFA0 - FFAF
Intel ICH8M Ultra ATA Storage Controller - 2850
C.2 DMA Channel Assignments
Table C.2: DMA channel assignments
Channel
Function
0
Available
1
Available
2
Available
3
Available
4
Direct memory access controller
5
Available
6
Available
7
Available
C.3 Interrupt Assignments
Table C.3: Interrupt assignments
Interrupt#
Interrupt source
NMI
Parity error detected
IRQ 0
System timer
IRQ 1
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ2
Available
IRQ3
Available
IRQ 4
Communications Port (COM1)
IRQ 5
Available
IRQ 6
Available
IRQ 7
Available
IRQ 8
System CMOS/real time clock
25
SOM-7565 A2 User Manual
Appendix C System Assignments
Table C.1: System I/O ports
Table C.3: Interrupt assignments
IRQ 9
Microsoft ACPI-Compliant System
IRQ 10
Available
IRQ 11
Available
IRQ 12
PS/2 Compatible Mouse
IRQ 13
Numeric data processor
IRQ 14
Primary IDE Channel
IRQ 15
Available
IRQ 16
Intel(R) Graphic Media Accelerator 3150
IRQ 16
Standard Universal PCI to USB Host Controller
IRQ 18
Intel(R) ICH8 Family USB Universal Host Controller - 2832*
IRQ 18
Intel(R) ICH8M 3 port Serial ATA Host Controller - 2828
IRQ 19
Intel(R) ICH8 Family USB Universal Host Controller - 2831*
IRQ 21
Microsoft UAA Bus Driver for High Definition Audio
IRQ 23
Intel(R) 82567V-3 Gigabit Network Connection*
IRQ 23
Intel ICH8 Family USB Universal Host Controller - 2830*
IRQ 23
Intel ICH8 Family USB2 Universal Host Controller - 2836*
*USB and Ethernet IRQ is automatically set by the system.
C.4 1st MB Memory Map
Table C.4: 1st MB memory map
Addr. range (Hex)
Device
00000000 - 0009FFFF
System board
000A0000 - 000BFFFF
Intel(R) Graphic Media Accelerator 3150
000A0000 - 000BFFFF
PCI Bus
000C0000 - 000CFFFF
System board
000D0000 - 000DFFFF
PCI bus
000E0000 - 000FFFFF
System board
00100000 - 7F6FFFFF
System board
7F700000 - DFFFFFFF
PCI Bus
D0000000 - DFFFFFFF
Intel(R) Graphic Media Accelerator 3150
E0000000 - EFFFFFFF
Motherboard resource
F0000000 - FED8FFFF
PCI Bus
FE980000 - FE9FFFFF
Intel(R) Graphic Media Accelerator 3150
FEA00000 - FEAFFFFF
Intel(R) Graphic Media Accelerator 3150
FEB00000 - FEB7FFFF
Intel(R) Graphic Media Accelerator 3150
FEBC0000 - FEBDFFFF
Intel 82567V-3 Gigabit Network Connection
FEBF8000 - FEBFBFFF
Microsoft UAA Bus Driver for High Definition Audio
FEBFE000 - FEBFEFFF
Intel 82567V-3 Gigabit Network Connection
FEBFF800 - FEBFFBFF
Intel ICH8 Family USB2 Enhanced Host Controller - 2836
FEBFFC00 - FEBFFCFF
Intel ICH8 Family SMBus Controller ®C 283E
FEC00000 - FEC00FFF
Motherboard resources
FED00000 - FED003FF
HPET (High Precision Event Timer)
FED14000 - FED19FFF
System board
FED1C000 - FED1FFFF
Motherboard resources
SOM-7565 A2 User Manual
26
FED20000 - FED3FFFF
Motherboard resources
FED40000 - FED8FFFF
Motherboard resources
FED90000 - FED93FFF
System board
FED90000 - FFFFFFFF
System board
FEE00000 - FEE00FFF
Motherboard resources
FFB00000 - FFBFFFFF
Intel 82802 Firmware Hub Device
FFC00000 - FFEFFFFF
Motherboard resources
FFF00000 - FFFFFFFF
Intel 82802 Firmware Hub Device
27
SOM-7565 A2 User Manual
Appendix C System Assignments
Table C.4: 1st MB memory map
www.advantech.com
Please verify specifications before quoting. This guide is intended for reference
purposes only.
All product specifications are subject to change without notice.
No part of this publication may be reproduced in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission of the publisher.
All brand and product names are trademarks or registered trademarks of their
respective companies.
© Advantech Co., Ltd. 2013
工商网监
湘ICP备2023018690号
