DS-313-PIN

2-Way Power Divider 10 - 2000 MHz DS-313 / DSS-313 Rev. V4 FP-2 (DS-313) Features • • • • • • Fully Hermetic Package Loss: 0.6 dB Mid-band Isolation: 28 dB Mid-band VSWR: 1.2:1 Mid-band Impedance: 50 Ω Nominal Maximum Power Rating or Input Power: 250 mW Max. • Internal Load Dissipation: 50 mW Max. • MIL-STD-202 Screening Available Applications • Aerospace & Defense • ISM Pin Configuration (DS-313) Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin # Function 1  2,3,5,6,7 GND 4 Output C 8 Output D SF-1 (DSS-313) Ordering Information Part Number Package DS-313-PIN FP-2 DSS-313-PIN SF-1 Pin Configuration (DSS-313) Pin # Function 1  2 Output C 3 GND 4 Output D 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx 2-Way Power Divider 10 - 2000 MHz DS-313 / DSS-313 Rev. V4 DS-313 Electrical Specifications1: TA = -55°C to +85°C Parameter Insertion Loss Isolation Test Conditions Frequency (MHz) Less Coupling 20 - 1000 10 - 1500 1500 - 2000 20 - 1000 10 - 1500 1500 - 2000 Units Min. Typ. Max. dB — — dB 23 18 12 — — 1.1 1.3 1.8 Amplitude Balance 20 - 1000 10 - 1500 1500 - 2000 dB — — 0.3 0.4 0.6 Phase Balance 20 - 1000 10 - 1500 1500 - 2000 ° — — 4 6 8 VSWR All Ports 20 - 1000 10 - 1500 1500 - 2000 Ratio — — Units Min. Typ. dB — — dB 22 18 12 — — 1.5:1 1.6:1 1.8:1 DSS-313 Electrical Specifications1: TA = -55°C to +85°C Parameter Insertion Loss Isolation Test Conditions Frequency (MHz) Less Coupling 20 - 1000 10 - 1500 1500 - 2000 20 - 1000 10 - 1500 1500 - 2000 Max. 1.1 1.3 1.8 Amplitude Balance 20 - 1000 10 - 1500 1500 - 2000 dB — — 0.3 0.4 0.6 Phase Balance 20 - 1000 10 - 1500 1500 - 2000 ° — — 5 8 11 VSWR All Ports 20 - 1000 10 - 1500 1500 - 2000 Ratio — — 1.5:1 1.6:1 1.8:1 1. All specifications apply with 50 ohm source and load impedance. 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx 2-Way Power Divider 10 - 2000 MHz DS-313 / DSS-313 Rev. V4 Typical Performance Curves Insertion Loss - Ports -C, −D Isolation - Ports C-D 40 1.000 Isolation (dB) Insertion Loss (dB) 1.200 0.800 0.600 0.400 30 20 10 0.200 0 0 0.000 0 0.01 0.03 0.1 0.3 1 1.2 1.4 1.6 1.8 2 2.2 F re que nc y ( G H z) 0.01 0.03 0.1 0.3 1 1.2 1.4 1.6 1.8 2 2.2 F requency (GH z) VSWR E Po r t C , D Po r t s 1.8 VSWR 1.6 1.4 1.2 1 0 0.01 0.03 0.1 0.3 1 1.2 1.4 1.6 1.8 2 2.2 F re que nc y ( G H z) 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx 2-Way Power Divider 10 - 2000 MHz DS-313 / DSS-313 Rev. V4 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx