ETC1-1T-2TR

ETC1-1T-2TR E-Series RF 1:1 Transformer 0.1 – 200 MHz Rev. V2 Schematic Features  1:1 Impedance Ratio  Surface Mount  Tape and reel packaging available Description M/A-COM’s ETC1-1T-2 is a 1:1 RF transformer in a low cost, surface mount package. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel. Product Image SM-22 package 123 5 4 Pin Configuration Pin No. Function 1 Secondary 2 Secondary CT 3 Secondary Dot 4 Primary Dot 5 Primary  Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support ETC1-1T-2TR E-Series RF 1:1 Transformer 0.1 – 200 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 0.1 - 200 MHz — — — Insertion Loss — 0.1 - 200 dB — 0.3 1.5 Amplitude Imbalance — 0.1 - 200 dB — — 0.5 Phase Imbalance — 0.1 - 200 Degrees — — 5° Absolute Maximum Ratings 1 Parameter Absolute Maximum RF Power 250 mW DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Operation of this device above any one of these parameters may cause permanent damage. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support ETC1-1T-2TR E-Series RF 1:1 Transformer 0.1 – 200 MHz Rev. V2 Typical Performance Curves Insertion Loss Amplitude Unbalance Phase Unbalance 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support ETC1-1T-2TR E-Series RF 1:1 Transformer 0.1 – 200 MHz Rev. V2 Tape & Reel Information Item Dimension Ao 4.00mm +/-0.1mm Bo 4.00mm +/-0.1mm Ko 2.9mm +/-0.1mm W 12.00mm +/-0.3mm P1 8.00mm +/-0.1mm Ordering Information Part Number Package ETC1-1T-2TR 2000 piece reel 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support ETC1-1T-2TR E-Series RF 1:1 Transformer 0.1 – 200 MHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support