JANTX2N3716

NPN Power Silicon Transistor 2N3715 & 2N3716 Features • Available in JAN, JANTX, and JANTXV per MIL-PRF-19500/408 • TO-3 (TO-204AA) Package Maximum Ratings Ratings Symbol 2N3715 2N3716 Units 60 80 Vdc Collector - Base Voltage VCEO VCBO 80 100 Vdc Emitter - Base Voltage VEBO 7.0 Vdc IB IC 4.0 Adc 10 Adc PT 5.0 117.0 W W TJ, Tstg -65 to +200 °C Collector - Emitter Voltage Base Current Collector Current Total Power Dissipation @ TA = 25 °C @ TC = 25 °C (1) Operating & Storage Junction Temperature Range 1) Derate linearly @ 28.57 mW / °C for TA > 25 °C Thermal Characteristics Characteristics Thermal Resistance, Junction-to-Case Symbol Maximum Units RθJC 1.5 °C/W Electrical Characteristics OFF Characteristics Collector - Emitter Breakdown Voltage IC = 10 mAdc Collector - Base Cutoff Current VCB = 80 Vdc VCB = 100 Vdc Symbol Mimimum Maximum Units 2N3715 2N3716 V(BR)CEO 60 80 --- Vdc 2N3715 2N3716 ICBO --- 10 10 μAdc IEBO --- 1.0 mAdc Emitter - Base Cutoff Current VEB = 7.0 Vdc Collector - Emitter Cutoff Current VBE = -1.5 Vdc, VCE = 60 Vdc VBE = -1.5 Vdc, VCE = 80 Vdc 2N3715 2N3716 ICEX --- 10 10 μAdc Collector - Emitter Cutoff Current VCB = 60 Vdc VCB = 80 Vdc 2N3715 2N3716 ICES --- 10 μAdc Revision Date: 3/1/2012 New Product 1 2N3715 & 2N3716 Electrical Characteristics -con’t ON Characteristics (3) Symbol Forward Current Transfer Ratio Mimimum Maximum Units HFE IC = 1.0 Adc, VCE = 2.0 Vdc 50 150 IC = 3.0 Adc, VCE = 2.0 Vdc 30 120 IC = 5.0 Adc, VCE = 2.0 Vdc 10 --- IC = 10.0 Adc, VCE = 2.0 Vdc 5 --- ----- 1.0 2.5 Vdc ----- 1.5 3.0 Vdc | hfe | 4.0 20.0 hfe 30 300 Cobo --- 500 Collector - Emitter Saturation Voltage IC = 5.0 Adc, IB = 0.5 Adc IC = 10.0 Adc, IB = 2.0Adc VCE(sat) Base - Emitter Saturation Voltage IC = 5.0 Adc, IB = 0.5 Adc IC = 10.0 Adc, IB = 2.0 Adc VBE(sat) DYNAMIC Characteristics Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.5 Adc, VCE = 10.0 Vdc, f = 1.0 kHz Forward Current Transfer Ratio IC = 0.5 Adc, VCE = 10.0 Vdc, f = 1.0 MHz Output Capacitance VCB = 10 Vdc, IE = 0, f = 1.0 MHz pF SAFE OPERATING AREA DC Tests: Test 1: Test 2: Test 3: TC = +25 °C, I Cycle, t = 1.0 s VCE = 15.0 Vdc, IC = 10 Adc VCE = 40.0 Vdc, IC = 3.75 Adc VCE = 55.0 Vdc, IC = 0.9 Adc 2N3715 VCE = 65.0 Vdc, IC = 0.9 Adc 2N3716 (3) Pulse Test: Pulse Width = 300 μs, Duty Cycle ~ 2.0 %. Outline Drawing 2 603-641-3800 • 888-641--SEMI (7364) • metelics-sales@aeroflex.com • www.aeroflex.com/metelics Revision Date: 1/3/2012 2N3715 & 2N3716 Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2012 Aeroflex / Metelics. All rights reserved. Revision Date: 3/1/2012 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.