NPN Power Silicon Transistor
2N5152, 2N5152L & 2N5154, 2N5154L
Features
•
Available in commercial, JAN, JANTX, JANTXV, JANS
and JANSR 100K rads (Si) per MIL-PRF-19500/544
•
TO-5 Package: 2N5152L, 2N5154L
TO-39 (TO-205AD) Package: 2N5152, 2N5154
Maximum Ratings (TC = +25°C unless otherwise noted)
Symbol
Value
Units
Collector - Emitter Voltage
Ratings
VCEO
80
Vdc
Collector - Base Voltage
VCBO
100
Vdc
Emitter - Base Voltage
VEBO
5.5
Vdc
IC
2.0
Adc
PT
1.0
10
W
Top, Tstg
RθJC
-65 to +200
°C
10
°C/W
Collector Current
Total Power Dissipation
@ TA = +25 °C
@ TC = +25 °C
Operating & Storage Temperature Range
Thermal Resistance, Junction-to-Case
Electrical Characteristics (TA = +25°C unless otherwise noted)
OFF Characteristics
Symbol
Mimimum
Maximum
Units
V(BR)CEO
80
---
Vdc
Emitter - Base Cutoff Current
VEB = 4.0 Vdc, IC = 0
VEB = 5.5 Vdc, IC = 0
IEBO
---
1.0
1.0
μAdc
mAdc
Collector - Emitter Cutoff Current
VCE = 60 Vdc, VBE = 0
VCE = 100 Vdc, VBE = 0
ICES
---
1.0
1.0
μAdc
mAdc
ICEO
---
50
μAdc
Collector - Emitter Breakdown Voltage
IC = 100 mAdc, IB = 0
Collector - Emitter Cutoff Current
VCE = 40 Vdc, IB = 0
Revision Date: 4/15/2014
1
2N5152, 2N5154
2N5152L, 2N5154L
Electrical Characteristics -con’t
ON Characteristics
Symbol
Mimimum
HFE
Maximum
Units
Forward Current Transfer Ratio
IC = 50 mAdc, VCE = 5.0 Vdc
2N5152
20
---
IC = 2.5 Adc, VCE = 5.0 Vdc
2N5154
2N5152
50
30
--90
IC = 5.0 Adc, VCE = 5.0 Vdc
2N5154
2N5152
70
20
200
---
2N5154
40
---
VCE(sat)
-----
0.75
1.5
Vdc
VBE(ON)
---
1.45
Vdc
VBE(sat)
---
1.45
2.2
Vdc
6
7
-----
hfe
20
50
-----
Cobo
---
250
pF
ton
---
0.5
μs
toff
---
1.5
μs
ts
tf
-----
1.4
0.5
μs
μs
Collector - Emitter Saturation Voltage
IC = 2.5 Adc, IB = 250 mAdc
IC = 5.0 Adc, IB = 500 mAdc
Emitter - Base Voltage Non-Saturation
IC = 2.5 Adc, VCE = 5.0 Vdc
Emitter - Base Saturation Voltage
IC = 2.5 Adc, IB = 250 mAdc
IC = 5.0 Adc, IB = 500 mAdc
DYNAMIC Characteristics
Magnitude of Common Emitter Small-Signal Short-Circuit
Forward Current Transfer Ratio
IC = 500 mAdc, VCE= 5.0 Vdc, f = 10 MHz
2N5152
2N5154
Small-signal short Circuit FOlWard-Current Transfer Ratio
IC = 100 mAdc, VCE = 5 Vdc, f= 1KHz
2N5152
2N5l54
Output Capacitance
VCB = 10 Vdc, IE = 0, f = 1.0 MHz
| hfe |
SWITCHING Characteristics
Turn-On Time
IC = 5.0 Adc; IB1 = 500 mAdc
Turn-off Time
RL = 6 Ω
Storage Time
IB2 = -500 mAdc
Fall Time
VBE(OFF) = 3.7 Vdc
SAFE OPERATING AREA
2
DC Tests:
TC = +25 °C, 1 Cycle, t = 1.0 s
Test 1:
Test 2:
VCE = 5.0 Vdc, IC = 2.0 Adc
VCE = 32.0 Vdc, IC = 310 mAdc
Test 3:
VCE = 80 Vdc, IC = 12.5 mAdc
603-641-3800 • 888-641--SEMI (7364) • metelics-sales@aeroflex.com • www.aeroflex.com/metelics
Revision Date: 4/22/2014
2N5152, 2N5154
2N5152L, 2N5154L
Outline Drawing
TO-5 Package: (2N5152L, 2N5154L)
TO-39 (TO-205AD) Package: (2N5152, 2N5154)
NOTE: Dimensions in Inches [mm]
Aeroflex / Metelics, Inc.
975 Stewart Drive,
Sunnyvale, CA 94085
Tel: (408) 737-8181
Fax: (408) 733-7645
ISO 9001: 2008 certified companies
54 Grenier Field Road,
Londonderry, NH 03053
Tel: (603) 641-3800
Fax: (603)-641-3500
Sales: 888-641-SEMI (7364)
Hi-Rel Components
9 Hampshire Street,
Lawrence, MA 01840
Tel: (603) 641-3800
Fax: (978) 683-3264
www.aeroflex.com/metelics-hirelcomponents
www.aeroflex.com/metelics
metelics-sales@aeroflex.com
Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services
herein at any time without notice. Consult Aeroflex or an authorized sales representative to
verify that the information in this data sheet is current before using this product. Aeroflex
does not assume any responsibility or liability arising out of the application or use of any
product or service described herein, except as expressly agreed to in writing by Aeroflex;
nor does the purchase, lease, or use of a product or service from Aeroflex convey a license
under any patent rights, copyrights, trademark rights, or any other of the intellectual rights
of Aeroflex or of third parties.
Copyright 2010 Aeroflex / Metelics. All rights reserved.
Revision Date: 4/22/2014
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.