JANTXV2N5680

PNP Power Silicon Transistor 2N5679 & 2N5680 Features • Available in JAN, JANTX and JANTXV per MIL-PRF-19500/582 • TO-39 (TO-205AD) Package Maximum Ratings (TA = 25°C unless otherwise noted) Symbol 2N5679 2N5680 Units Collector - Emitter Voltage Ratings VCEO 100 120 Vdc Collector - Base Voltage VCBO 100 120 Vdc Emitter - Base Voltage VEBO 4.0 4.0 Vdc Collector Current IC 1.0 1.0 Adc Base Current IB 0.5 0.5 Adc Total Power Dissipation @ TA = +25 °C @ TC = +100 °C PT 1.0 10.0 1.0 10.0 W W Operating & Storage Temperature Range Top, Tstg -65 to +200 °C Characteristics Symbol Maximum Unit Thermal Resistance, Junction-to-Case RθJC 7.0 °C/W Thermal Characteristics 1) Derate linearly 5.7 mW/°C for TA > +25 °C 2) Derate linearly 57 mW/°C for TC > +25 °C Electrical Characteristics (TA = 25°C unless otherwise noted) OFF Characteristics Collector - Emitter Breakdown Voltage IC = 100 mAdc 2N5679 2N5680 Symbol Mimimum Maximum Units V(BR)CEO 60 80 --- Vdc Collector - Emitter Cutoff Current VCE = 40 Vdc VCE = 60 Vdc 2N5679 2N5680 ICEO --- 10 10 μAdc Collector - Emitter Cutoff Current VCE = 60 Vdc, VBE = 1.5 Vdc VCE = 80 Vdc, VBE = 1.5 Vdc 2N5679 2N5680 ICEX --- 300 300 nAdc Collector - Base Cutoff Current VCB = 60 Vdc VCB = 80 Vdc 2N5679 2N5680 ICBO --- 100 100 nAdc IEBO --- 100 nAdc Emitter - Base Cutoff Current VEB = 7.0 Vdc Revision Date: 2/7/2014 1 2N5679 & 2N5680 Electrical Characteristics -con’t ON Characteristics (1) Symbol Minimum Maximum 40 150 HFE 20 Forward Current Transfer Ratio IC = 250 mAdc, VCE = 2.0 Vdc IC = 500 mAdc, VCE = 2.0 Vdc IC = 1.0 Adc, VCE = 2.0 Vdc Collector - Emitter Saturation Voltage IC = 250 mAdc, IB = 25 mAdc IC Base IC IC = 500 mAdc, IB = 50 mAdc - Emitter Voltage = 250 mAdc, IB = 25 mAdc = 500 mAdc, IB = 50 mAdc Unit 5 VCE(sat) --- 0.6 Vdc --- 1.0 VBE(on) ----- 1.1 1.3 Vdc | hfe | 3.0 hfe 40 Cobo --- 50 pF DYNAMIC Characteristics Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.1 Adc, VCE = 1.5 Vdc, f = 10 MHz Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.2 Adc, VCE = 1.5 Vdc, f = 1.0 kHz Output Capacitance VCB = 20 Vdc, IE = 0, f = 1.0 MHz SAFE OPERATING AREA DC Tests: Test 1: TC = +25 °C, 1 Cycle, t ≥ 0.5 s VCE = 2.0 Vdc, IC = 1.0 Adc Test 2: VCE = 10 Vdc, IC = 1.0 Adc VCE = 90 Vdc, IC = 10 mAdc Test 3: 2 603-641-3800 • 888-641--SEMI (7364) • metelics-sales@aeroflex.com • www.aeroflex.com/metelics Revision Date: 2/7/2014 2N5679 & 2N5680 Outline Drawing NOTE: Dimensions in Inches [mm] Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelicsHRC www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex / Metelics. All rights reserved. Revision Date: 2/7/2014 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.