JHS-115-PIN

JH-115 / JHS-115 Surface Mount Quadrature Hybrid, 40 - 80 MHz Rev. V3 Features FP-2 (JH-115)      Fully Hermetic Package 3° Maximum Phase Deviation from 90° Low Loss: 0.5 dB Max. Impedance: 50 Ohms Nominal Input Power: Watts Max. Derated to 1 Watt @ 100°C  Typical Phase Linearity: 3° from Straight Line  MIL-STD-202 Screening Available Description Ideally suited for Quadrature Combining or performing Summation/Differential Combining. SF-1 (JHS-115) Pin Configuration (JH-115) Pin No. Function Pin No. Function 1 A 5 D 2 GND 6 GND 3 GND 7 GND 4 B 8 C Pin Configuration (JHS-115) Pin No. Function Pin No. Function 1 A 3 D 2 B 4 C 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support JH-115 / JHS-115 Surface Mount Quadrature Hybrid, 40 - 80 MHz Rev. V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Less Coupling 40 - 80 MHz dB — — 0.5 Isolation — 40 - 80 MHz dB 20 — — Amplitude Balance — 40 - 80 MHz dB — — 0.8 VSWR — 40 - 80 MHz Ratio — — 1.2:1 Deviation from Quadrature — 40 - 80 MHz ° — — 3 Insertion Loss 2 1. All specifications apply with 50 ohm source and load impedance. 2. Average of coupled output less 3 dB. Phasing Diagram OUT A Typical Performance Curves B C D ISO 0° -90° -90° 0° Isolation IN B ISO C 0° 90° D -90° 0° ISO ISO 40 Isolation (dB) A 30 20 30 40 50 60 70 80 90 80 90 F requency (M H z) VSWR 1.2 0 VSWR Deviation from 90° Deviation from Quadrature -1 1.1 -2 30 40 50 60 70 F requency (M H z) 80 90 1.0 30 40 50 60 70 F re que nc y ( G H z) 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support JH-115 / JHS-115 Surface Mount Quadrature Hybrid, 40 - 80 MHz Rev. V3 Typical Performance Curves Transmission Phase Po rt s A - C , B - D Coupling Po rt s A - D , B - C Po r t s A - C , B - D Po r t s A - D , B - C 4.0 Transmission Phase (Degrees) 30 Coupling (dB) 0 -30 90° -60 -90 3.6 3.2 2.8 2.4 -120 30 40 50 60 70 80 F requency (M H z) 90 2.0 30 40 50 60 70 80 F re que nc y ( M H z) Ordering Information Part Number Package JH-115 PIN FP-2 JHS-115 PIN SF-1 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 90 JH-115 / JHS-115 Surface Mount Quadrature Hybrid, 40 - 80 MHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support