M21232G-32

Next Generation High Performance Analog Broadcast Video Solutions M21232 HD/SD Broadcast Video Co-axial Cable Drivers > KEY FEATURES > SMPTE 292M, SMPTE 259M, SMPTE 344M compliant The M21232 is an evolution of Mindspeed’s single channel HD/SD video co-axial cable drivers that provide significant power savings with superior performance and flexible power supply options when compared to other competing single channel cable drivers. > Supports data rate operation of 143, 177, 270, 360, 540, 1483.5/1485 Mbps and DVB-ASI at 270 Mbps > Fully differential signal paths > LVPECL compatible input The devices are packaged in a new 3x3mm high performance MLF package for improved output return loss (ORL) > SD/HD Slew rate control input > Reduced power dissipation - 90mW typical @ 2.5V - 120mW typical @ 3.3V > 50mVp-p differential input voltage sensitivity > Increased operating temperature range: -10°C to +85°C > 1200mVpp Max. output swing > RoHS compliant or Recycler Pkg. performance and extremely close placement to the output BNC. Both cable drivers will be available in a GREEN (RoHS) > 2.5V or 3.3V Operation compliant package option. The M21232 provides nominal 800mVp-p SMPTE output swings with a fixed resistor value but has additional output swing headroom to provide 1200mVp-p maximum amplitude • M21260 4x4 1.6 Gbps video crosspoint switch with quad multi-rate reclockers single-ended output swings. • DS-M21261 1:4 1.6 Gbps video fanout with SD/HD The M21232 is complemented by the M21235 HD/SD video multi-rate reclocking multi-rate reclocker, the M21245 HD/SD reclocker/cable driver in 7x7 MLF packaging, and the M21234 HD/SD video cable equalizer in a 5x5mm MLF package to optimize • DS-M21262 4:1 1.6 Gbps video selector with SD/HD multi-rate reclocker performance and density in new multi-rate designs. Mindspeed’s innovative circuit architecture enables next Additional unique Mindspeed devices include the HD/SD generation systems with flexible power supply operation quad channel reclocking and asynchronous switching families: of 2.5V to 3.3V with 40% to 50% typical to MAX power reduction @ 2.5V (25% to 42% @ 3.3V) supply rails and a • M21250, DS-M21251, DS-M21252 quad channel multi-rate wider operating temperature range (-10º to + 85ºC). video reclockers > M21131V - 72 x 72 M21151V - 144 x 144 Crosspoint Single Channel Reclockers M21235 M21215 SDO HD - SDI or SD-SDI CD CLOCK & DATA RECOVERY W/ BYPASS Cable Equalizers Switches M21214 M21234 M21111 - 17 x 17 M21121 - 34 x 34 SDO HD or SD 75 Ohm Cable Drivers M21212 M21232 Quad Mindspeed Reclockers M21250 DS-M21251 DS-M21252 HD/SD Serial Routing Switcher Application Diagram M21131V - 72 x 72 M21151V - 144 x 144 Crosspoint FPGA 10 HD-SDI or SD-SDI Deserializers 10 Cable Equalizers EFFECTS PROCESSING C BLOCK PCLK Matrices M21214 M21234 Y M21111 - 17 x 17 M21121 - 34 x 34 Integrated Mindspeed SerDes IP LINE SYNC/GENLOCK MEMORY MANAGER 10 HD SDO or SD SDO CD Serializers 10 Y FRAME MEMORY FRAME SYNC C PCLK 75 Ohm Cable Drivers M21212 M21232 HD/SD Production & Master Control Switcher Application Product Features Applications Ordering Information • Small to large serial routing switchers • M21232-32: HD/SD Video Cable Driver (143M–1600M) • Master control switchers • Productions switchers • Distribution amplifiers Package: 3x3mm, 16 pin MLF 3x3mm, 16 pin MLF (RoHS compliant package) • M21232G-32: HD/SD Video Cable Driver (143M –1600M) (RoHS compliant package) • SD/HD-SDI processing gear www.mindspeed.com/salesoffices General Information: (949) 579-3000 Headquarters – Newport Beach 4000 MacArthur Blvd., East Tower Newport Beach, CA 92660-3007 21232-BRF-001-D.pdf © 2006 Mindspeed Technologies, Inc. All rights reserved. Mindspeed and the Mindspeed logo are trademarks of Mindspeed Technologies. All other trademarks are the property of their respective owners. Although Mindspeed Technologies strives for accuracy in all its publications, this material may contain errors or omissions and is subject to change without notice. This material is provided as is and without any express or implied warranties, including merchantability, fitness for a particular purpose and non-infringement. Mindspeed Technologies shall not be liable for any special, indirect, incidental or consequential damages as a result of its use.