MA4P7452F-1072T

Non Magnetic SMQ MELF PIN Diode MA4P7452F-1072 Rev. V4 Features • Non-Magnetic Package Suitable for MRI Applications • Rectangular MELF SMQ Ceramic Package • Hermetically Sealed • Low RS for Low Series Loss • Long tL for Lower Intermodulation Distortion • Low CJ for High Series Isolation • High Average Incident Power Handling • RoHS* Compliant Applications • Aerospace & Defense • ISM Description The MA4P7452F-1072T is a surface mountable PIN diode in a non-magnetic, Metal Electrode Leadless Faced (MELF) package. The device incorporates Macoms’ time proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. Incorporated in the package is a hard glass passivated, CERMACHIP™ PIN chip that is full face bonded on both the cathode and anode to maximize surface area for the lowest electrical and thermal resistance. The package utilizes a non-magnetic plating process that provides for a package with extremely low permeability. This device has been comprehensively characterized both electrically and mechanically to ensure repeatable & predictable performance. The nonmagnetic MA4P7452F-1072T is the electrical equivalent of its magnetic counterpart the MA4P7002F-1072T. This diode is well suited for use in low loss, low distortion, high power switching circuits and can be used in high magnetic field environments at HF through UHF frequencies. The low thermal resistance of this device provides excellent performance at high RF power incident levels, up to 100 watts CW. This device is designed to meet the most demanding electrical and mechanical MRI environments. Designed for Automated Assembly These SMQ PIN diodes are designed for high volume tape and reel assembly. The rectangular package design provides for highly efficient automatic pick and place assembly techniques. The parallel flat surfaces are suitable for key jaw or vacuum pickup. All solderable surfaces are tin plated and compatible with reflow and vapor phase soldering methods. Ordering Information Part Number Package MA4P7452F-1072T Tape and Reel 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007023 Non Magnetic SMQ MELF PIN Diode MA4P7452F-1072 Rev. V4 Electrical Specifications @ +25°C Parameter Test Conditions Units Min. Typ. Max. Forward Voltage IF = +100 mA VDC — — 1 Voltage Rating Ir = -10 µA VDC 150 — — Total Capacitance -100 V @ 100 MHz pF — — 0.7 Series Resistance +100 mA @ 100 MHz Ω — — 0.9 Parallel Resistance -10 V @ 100 MHz kΩ 75 — — Carrier Lifetime +6 mA / -10 mA @ (50% - 90% Voltage) µs — 9 — I-Region Length - µm — 175 — CW Thermal Resistance IH = 1A, IL = 10 mA, T = 1 ms °C/W — — 15 Power Dissipation in Free Air IF = +100 mA W — — 4 Power Dissipation IF = +100 mA W — — 10 Absolute Maximum Ratings1 @ 25°C Parameter Absolute Maximum RF CW Incident Power 50 dBm CW Forward DC Current + 250 mA Reverse DC Voltage @ -10 µA l - 150 V l Operating Temperature -65°C to +125°C Storage Temperature -65°C to +150°C Junction Temperature +175°C Continuous Mounting Temperature +235°C for 10 seconds 1. Exceeding these limits may cause permanent damage. Environmental Capability MELF devices are appropriate for use in industrial and military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet. 2 Test Method Description High Temperature Storage 1031 +150°C, for 340 Hours Temperature Shock 1051 -65°C to +150°C, 20 Cycles HTRB 1038 80% of rated VB, +150°C, for 96 Hours Moisture Resistance 1021 No Initial Conditioning, 85% RH, +85°C Gross Leak 1071 Cond. E Dye Penetrant Visual Vibration Fatigue 2046 20,000G’s, 60Hz, x, y, z axis Solderability 2026 Test Temperature = +245°C MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007023 Non Magnetic SMQ MELF PIN Diode MA4P7452F-1072 Rev. V4 Typical Electrical Performance @ +25°C Series Resistance vs. Current Parallel Resistance vs. Voltage 1.0e+5 Parallel Resistance () Series Resistance () 1000 100 10 1 0.1 100 MHz 1000 MHz 0 0.1 1 10 100 1.0e+4 1.0e+3 0.1 1 Current (mA) 10 100 Voltage (V) Ls (50 mA) vs. Frequency Total Capacitance vs. Voltage 1.0 S L (nH) T Total Capacitance (C ) 1.0 100 MHz 1500 MHz 0.1 0.1 1 10 Voltage (V) 100 0.1 100 1000 Frequency (MHz) 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007023 Non Magnetic SMQ MELF PIN Diode MA4P7452F-1072 Rev. V4 Typical Non-Magnetic Performance Comparison of Magnetic Moment for MA4P7400F-1091T 1072T Non-Magnetic Comparison ofSeries Magnetic Moment for MA4P7400F-1072T & MA4P7002F-1072T Magnetic Devices & MA4P4001F-1091T Magnetic Devices 1.5E-01 1.0E-01 MA4P7002F-1072T Magnetic MA4P4001F-1091T Magnetic 5.0E-02 0.0E+00 MA4P7400F-1091T Non-Magnetic Series -5.0E-02 -1.0E-01 -1.5E-01 -1.0E+04 -8.0E+03 -6.0E+03 -4.0E+03 -2.0E+03 0.0E+00 2.0E+03 4.0E+03 6.0E+03 8.0E+03 1.0E+04 H Field ( Oersteads ) Typical Magnetic Properties of Non-Magnetic MA4P7452F-1072T Device vs. Conventional MA4P7002F-1072T Magnetic Device Magnetic Property MA4P7452F-1072T MA4P7002F-1072T Saturation Moment (EMU) @ H = HMAX Oersteads 2.3 x E-4 2.1 x E-2 Remanance Moment (EMU) @ H = 0 Oersteads 4.2 x E-8 7.1 x E-3 Coercivity (Oersteads) @ EMU = 0 Moment 1.0 59.2 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007023 Non Magnetic SMQ MELF PIN Diode MA4P7452F-1072 Rev. V4 1072 MELF Surface Mount Package Circuit Pad Layout for 1072 MELF A B Dimension inches mm Dimension C B Package Style 1072 inches mm A 0.093 2.36 3.429 B 0.050 1.27 0.762 C 0.060 1.52 Min. Max. Min. Max. A 0.080 0.095 2.032 2.413 B 0.115 0.135 2.921 C 0.008 0.030 0.203 1072 Package (tape and reel only) 1500 pcs/reel 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007023 Non Magnetic SMQ MELF PIN Diode MA4P7452F-1072 Rev. V4 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007023