MAADSS0008SMB

MAADSS0008 Digital Attenuator, 1-Bit, 15 dB DC - 2.0 GHz Features          Rev. V2 Functional Schematic Single 15-dB Step Low Loss, 0.3 dB Typical @ 900 MHz 2.5 to 5.0 Volt Operation Tape and Reel Packaging Available Lead-Free SOT-25 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of AT-267 5 4 Description M/A-COM’s MAADSS0008 is a 1-bit, 15-dB step GaAs MMIC digital attenuator in a lead-free SOT-25, 5 lead surface mount plastic package. The MAADSS0008 is ideally suited for use where high accuracy, very low power consumption and low intermodulation products are required. Typical applications include wireless handsets, base stations, wireless LAN equipment, GPS receivers and any RF applications with automatic gain/level control circuits. 1 2 3 Pin Configuration Pin No. Function Pin No. Function 1 RF1 4 V1 2 Ground 5 V2 3 RF2 The MAADSS0008 is fabricated as a monolithic GaAs integrated circuit using a mature PHEMT process. The process features full chip passivation for performance and reliability. Absolute Maximum Ratings 2,3 Ordering Information 1 Part Number Package Parameter Absolute Maximum MAADSS0008TR 1000 piece reel Input Power +21 dBm MAADSS0008TR-3000 3000 piece reel MAADSS0008SMB Sample Board 1. Reference Application Note M513 for reel size information. Control Voltage VC  8V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAADSS0008 Digital Attenuator, 1-Bit, 15 dB DC - 2.0 GHz Rev. V2 Electrical Specifications4: TA = 25°C, VC = +2.5 Volts, Z0 = 50 Ω Parameter Test Conditions Units Min Typ Max Insertion Loss (Reference State) 1.0 GHz 2.0 GHz dB dB — — 0.3 0.4 0.4 0.5 Attenuation 1.0 GHz 2.0 GHz dB dB 14.6 14.4 15.1 14.9 15.6 15.4 VSWR 1.0 GHz 2.0 GHz Ratio Ratio — — 1.2:1 1.3:1 — — Input IP3 1.0 GHz Insertion Loss State Attenuation State dBm dBm 40 40 50 50 — — P1dB 1.0 GHz Insertion Loss State Attenuation State dBm dBm 24 20 26 23 — — Control Current — µA — — 10 Trise, Tfall 10% to 90% RF, 90% to 10% RF nS — 29 — Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF nS — 50 — Transients In-band mV — 10 — 4. For positive voltage control, external DC blocking capacitors are required on all RF ports (pins 1, 2 and 3). Lead-Free SOT-25† Positive Control Voltage Schematic 5 1 † Reference Application Note M538 for lead-free solder reflow recommendations. 39 pF 4 2 39 pF 3 39 pF Truth Table 5,6 Mode (Control) V1 V2 Attenuation Positive 5 0 ± 0.2V +2.5V to +5V +2.5V to +5V 0 ± 0.2V 15 dB Reference State Negative 6 0 ± 0.2V -2.5V to -5V Reference State 15 dB -2.5V to -5V 0 ± 0.2V 5. External DC blocking capacitors are required as noted. 6. If negative control is used, DC blocking capacitors are not required on RF ports and ground. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAADSS0008 Digital Attenuator, 1-Bit, 15 dB DC - 2.0 GHz Rev. V2 Typical Performance Curves Insertion Loss with Negative Control Insertion Loss with Positive Control Attenuation with Negative Control Attenuation with Positive Control VSWR, 0 and 15 dB States with Negative Control at +25°C VSWR, 0 and 15 dB States with Positive Control at +25°C 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAADSS0008 Digital Attenuator, 1-Bit, 15 dB DC - 2.0 GHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 4 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support