MAAM-009560-TR3000

RF Driver Amplifier 250 - 4000 MHz MAAM-009560 Rev. V2 Features Functional Schematic • Output Intercept Point of +42 dBm over a 20 dB Input Power Range • Broadband Operation • Lead-Free SOT-89 Package • RoHS* Compliant • Class 2 ESD Rating Applications • ISM • Wireless Networking & Communication Description 1 The MAAM-009560 RF driver amplifier is a GaAs MMIC which exhibits exceptional linearity performance over a >20 dB dynamic range, as well as featuring high gain in a lead-free miniature SOT-89 surface mount plastic package. The device is biased with a single +5 volt supply and consumes 225 mA typically. RFIN 3 RFOUT / Bias Pin Configuration The MAAM-009560 is fabricated using an HBT process to realize low current and high linearity. The process features full passivation for increased performance and reliability. 1 RF Input 2 Ground 3 RF Output/Bias Ordering Information1,2 MAAM-009560-000000 Bulk Packaging MAAM-009560-TR1000 1000 piece reel MAAM-009560-TR3000 3000 piece reel MAAM-009560-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 1 * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx RF Driver Amplifier 250 - 4000 MHz MAAM-009560 Rev. V2 Electrical Specifications: Freq. = 2140 MHz, T A = 25°C, VCC = +5 V, Z0 = 50 Ω Gain dB 14 15 — Noise Figure dB — 3 — Input Return Loss dB — 15 — Output Return Loss dB — 17 — Output P1dB dBm — 28.5 — Output IP3 dBm 40 42 — Quiescent Current mA — 220 — Current (PIN = 0 dBm) mA — 225 325 Maximum Operating Conditions3 Absolute Maximum Ratings5,6 Junction Temperature4 170 °C RF Output Power 29 dBm RF Output Power 28 dBm Voltage 6 volts Operating Temperature -40 °C to +85 °C Storage Temperature -65 °C to +150 °C Junction Temperature 210 °C 3. These operating conditions will ensure MTTF > 1 x 106 hours. 4. Junction Temperature (T J) = TA + Өjc * ((V * I) - (POUT - PIN)) Typical thermal resistance (Өjc) = 47° C/W a) For TA = 25°C, TJ = 73 °C @ 5 V, 225 mA, POUT = 20 dBm, PIN = 5.0 dBm b) For TA = 85°C, TJ = 123 °C @ 5 V, 180 mA, POUT = 20 dBm, PIN = 5.5 dBm 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. MACOM does not recommend sustained operation near these survivability limits. 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx RF Driver Amplifier 250 - 4000 MHz MAAM-009560 Rev. V2 2140 MHz PCB Layout Parts List 2140 Schematic C1 1.8 pF 0402 C2 2.2 pF 0402 C3 0.1 µF 0402 C4 1000 pF 0402 C5 39 pF 0402 C6 1 pF 0402 C7 2 pF 0402 L1 3.6 nH 0402 R1, R2 0Ω 0402 Cross Section View VCC RF Traces & Components RF Ground C3 DC Routing C4 C2 Customer Defined ` RFIN L1 C1 R1 C5 C7 C6 R2 RFOUT The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ω lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008” (0.20 mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended RF metalization is 1 ounce copper. 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx RF Driver Amplifier 250 - 4000 MHz MAAM-009560 Rev. V2 Typical Performance Curves, 2140 MHz Configuration Gain Input Return Loss 25 0 20 -10 15 -20 10 -30 +25°C -40°C +85°C 5 0 2.10 2.12 2.14 2.16 +25°C -40°C +85°C -40 2.18 2.20 -50 2.10 2.12 Frequency (GHz) 2.14 2.16 2.18 2.20 2.18 2.20 Frequency (GHz) Output Return Loss Noise Figure 6 0 5 -10 4 -20 3 -30 +25°C -40°C +85°C 2 -40 1 -50 2.10 2.12 2.14 2.16 2.18 2.20 0 2.10 2.12 2.14 2.16 Frequency (GHz) Frequency (GHz) Output IP3 P1dB 30 60 +25°C -40°C +85°C 25 50 20 40 15 30 10 20 5 10 0 0 5 10 15 20 Output Power (dBm) 25 30 0 0 5 10 15 20 25 30 Output Power / Tone (dBm) 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx RF Driver Amplifier 250 - 4000 MHz MAAM-009560 Rev. V2 Typical Performance Curves, 2140 MHz Configuration Current 350 Handling Procedures 300 Please observe the following precautions to avoid damage: 250 200 Static Sensitivity 150 Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these class 2 devices. 100 50 0 0 5 10 15 20 25 30 Output Power (dBm) Lead-Free SOT-89 Plastic Package† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx RF Driver Amplifier 250 - 4000 MHz MAAM-009560 Rev. V2 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-xxxxxxx