MAAM-010333-TR3000

MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 TILTA VDD_AGC N/C Inter A 24 23 22 21 20 19 18 RFBA N/C 1 17 RFOUT A 2 RFIN A N/C 3 4 15 IADJ2B 14 RFOUT B RFIN B 5 13 RFBB The MAAM-010333 is fabricated using MACOMs’ low noise GaAs pHEMT technology in a lead-free 4 mm 24-lead package. The amplifier requires a minimal number of off-chip components resulting in a highly integrated low cost solution. Ordering Information1,2 Part Number Description MAAM-010333-TR1000 1000 Piece Reel MAAM-010333-TR3000 3000 Piece Reel MAAM-010333-001SMB Sample Test Board MAMU-011089-SMBPPR Reference design PCB including 2nd stage MAAM-007807 amplifier 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 9 10 11 12 InterB 8 N/C I ADJ B 7 VAGC 6 TILTB N/C The MAAM-010333 provides high gain, low noise and low distortion amplification for optical node applications. 16 IADJ2A VVA N/C Description 1 VDD1A -8 dBm to +2 dBm Optical Input Range Low Equivalent Input Noise (EIN): 3.2 pA/rtHz Single +5 V Bias 29 dB Gain at 55 MHz; 34 dB Gain at 1000 MHz 27 dB Gain Control Range +24 dBmV/ch Output at 550 MHz Lead-Free 4 mm PQFN-24LD Plastic Package Halogen-Free “Green” Mold Compound RoHS* Compliant VDD1B          IADJ A Functional Schematic Features Pin Configuration3 Pin No. Pin Name Description 1 N/C No Connection 2 3 RFINA N/C RF Input A No Connection 4 N/C No Connection 5 6 7 8 9 RFINB N/C IADJB VDD1B TiltB RF Input B No Connection Current Adjust + 5V Bias Voltage Tilt Connection 10 VAGC AGC Control Voltage: 0V to 3V 11 N/C No Connection 12 13 14 15 16 17 18 19 InterB RFBB RFOUT B IADJ2B IADJ2A RFOUT A RFBA InterA Interstage Pin Feedback Resistor RF Output B Current Adjust Current Adjust RF Output A Feedback Resistor Interstage Pin 20 N/C No Connection 21 22 23 VDD_AGC TiltA VDD1A + 5V AGC Bias Voltage Tilt Connection + 5V Bias Voltage 24 IADJA Current Adjust 25 Paddle RF & DC Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Electrical Specifications4: VDD = +5 V Regulated Supply5 , TA = 25°C, Z0 = 75 Ω Parameter Test Conditions 50 MHz 870 MHZ 1 GHz VAGC = +3 V VAGC = 0 V Trans-Impedance Gain6,7 Gain Tilt8 Gain Flatness9 VAGC: 0 to 3 V Gain Control Range 50 MHz 870 MHZ 1 GHz AGC Control Voltage Range Units Min. Typ. Max. dB 26.5 31.0 31.5 30.5 35.0 35.5 dB - 29.0 33.0 34.0 5 7 dB - 0.7 dB 25.5 23.0 24.0 29.0 26.0 27.0 32.0 29.0 30.0 50 MHz - 1 GHz V 0 - +3 EIN7 50 MHz - 1 GHz pA/rtHz - 3.2 - Output Return Loss 50 MHz - 1 GHz dB - 18 - 10 79 channels dBc - -68 - 10 79 channels dBc - -65 - VDD = +5 V mA 225 260 295 CTB CSO Current 4. Performance is specified using JDSU Photodiode EPM-745 or equivalent (EPM705) and output balun # MABA-009210-CT1760. 5. MACOM recommends use of a regulated supply voltage in order to limit performance variation. 6. Gain = 20*log(ZT/75), where ZT = Transconductance (Ω). 7. Specified at maximum gain (VAGC = +3.0 V). 8. Positive gain slope from 50 MHz to 1 GHz (tilt of best fit straight line from 50 MHz to 1 GHz). 9. Flatness defined as peak-peak deviation from best fit straight line. 10. Optical Input Power Range: -8 dBm to +2 dBm; 79 channels: OMI = 3.5%; Pout = +24 dBmV/ch at 550 MHz POUT = +22.5 dBmV/ch at 55 MHz; +24 dBmV/ch at 550 MHz Absolute Maximum Ratings11,12,13 Please observe the following precautions to avoid damage: Parameter Absolute Maximum Input Power +3 dBm Optical Operating Voltage +15 volts Static Sensitivity AGC Voltage +5 volts Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Operating Temperature Junction Temperature 14 Storage Temperature 2 Handling Procedures -40°C to +85°C +150°C -65°C to +150°C 11. Exceeding any one or combination of these limits may cause permanent damage to this device. 12. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 13. Operating at nominal conditions with TJ ≤ +150°C will ensure MTTF > 1 x 106 hours. 14. Junction Temperature (TJ) = TC + Өjc * ((V * I) - (POUT - PIN)) Typical thermal resistance (Өjc) = 19° C/W. a) For TC = 25°C, TJ = 53 °C @ 5 V, 295 mA b) For TC = 85°C, TJ = 112 °C @ 5 V, 295 mA MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Recommended PCB Schematic Including Off-Chip Components 19 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Component Application Functional Schematic Value Case Style Ferrite Bead 0402 L9 - L10 12 nH w/w 0402 L11 8.2 nH 0402 L12 33 nH 0402 L13 - L14 10 nH 0402 C1 - C12 10 nF 0402 C13 - C14 2.7 pF 0402 C15 3.0 pF 0402 C16 - C17 2.0 pF 0402 C18 - C22 1.0 µF 0603 R1 - R4 1 kΩ 0402 R5 - R7 680 Ω 0402 L1 - L8 15 R8 200 Ω 0402 R9 - R10 120 Ω 0402 R11 - R12 39 Ω 0402 R13 82 Ω 0402 R14 180 Ω 0402 R15 - R16 12 Ω 0402 R17 - R18 47 Ω 0402 R19 - R20 62 Ω 0402 R21 6.2 Ω 0402 R22 1 kΩ 0603 R23 470 Ω 0402 1:1 Balun SM-118A T1 16 15. Ferrite Bead from Murata, part number BLM15HD182SN. 16. MACOM’s MABA-009210-CT1760 1:1 TX Line Balun. MAAM-010333 Gain Control Balun Parts List for 1GHz Matching RF Output Bulk Optic PCB Land Pattern All dimension are in mm 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Typical Performance Curves with 1 GHz Matching: +25°C, VAGC = 0 V to 3 V in 0.2 V Steps Vagc=0.0V Vagc=0.2V Vagc=0.4V Vagc=0.6V Vagc=0.8V Vagc=1.0V Vagc=1.2V Vagc=1.4V Receiver Gain vs. Frequency to 1.1 GHz Vagc=1.6V Vagc=1.8V Vagc=2.0V Vagc=2.2V Receiver Gain vs. Frequency to 1.6 GHz 35 35 30 30 25 25 20 20 15 15 10 10 5 5 0 0 -5 0 200 400 600 800 Vagc=2.4V Vagc=2.6V Vagc=2.8V Vagc=3.0V 1000 Frequency (MHz) -5 0 200 400 600 800 1000 1200 1400 1600 Frequency (MHz) Output Return Loss vs. Frequency -10 -15 -20 -25 -30 -35 -40 0 200 400 600 800 1000 Frequency (MHz) 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Typical Performance Curves with 1 GHz Matching: VAGC = 0 V to 3 V in 0.2 V Steps Vagc=0.0V Vagc=0.2V Vagc=0.4V Vagc=0.6V Vagc=0.8V Vagc=1.0V Vagc=1.2V Vagc=1.4V Gain Flatness Deviation From Best Fit Line @ +25°C Vagc=1.6V Vagc=1.8V Vagc=2.0V Vagc=2.2V Gain Flatness Deviation From Best Fit Line @ -40°C 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 0 200 400 600 800 1000 Frequency (MHz) Vagc=2.4V Vagc=2.6V Vagc=2.8V Vagc=3.0V -2.0 0 200 400 600 800 1000 Frequency (MHz) Gain Flatness Deviation From Best Fit Line @ +85°C 2.0 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 0 200 400 600 800 1000 Frequency (MHz) 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Typical Performance Curves with 1 GHz Matching: Gain Tilt Deviation from Average Tilt Equivalent Input Noise @ Max Gain (VAGC = 3V) 6 2.0 1.5 +25°C -40°C +85°C 5 1.0 4 0.5 3 0.0 -0.5 +25°C -40°C +85°C -1.0 2 1 -1.5 -2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 0 200 400 600 800 1000 Frequency (MHz) Control Voltage (V) Receiver Gain vs. VAGC 40 35 50 MHZ 500 MHz 870 MHZ 1000 MHz 30 25 20 15 10 5 0 0.0 0.5 1.0 1.5 V AGC 2.0 2.5 3.0 (V) 7 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Typical Performance Curves with 1 GHz Matching: 79 Channels; NTSC Frequency Plan; Pout = +22.5 dBmV/ch @ 55 MHz; +24 dBmV @ 550 MHz CTB vs. Optical Input Power -60 -62 -64 -66 -68 -70 -72 -74 -76 -78 -80 -6 -5 -4 -3 -2 -1 0 1 2 Optical Input Power (dBm) CSO_Lower vs. Optical Input Power CSO_Upper vs. Optical Input Power -64 -64 -66 -66 -68 -68 -70 -70 -72 -72 -74 -74 -76 -76 -78 -78 -80 -6 -5 -4 -3 -2 -1 0 Optical Input Power (dBm) 1 2 -80 -6 -5 -4 -3 -2 -1 0 1 2 Optical Input Power (dBm) 8 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Lead Free 4 mm 24-lead PQFN17 17. Reference Application Note 2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 9 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 Application Section for 50 MHz to 1.2 GHz Typical Performance Curves with 1.2 GHz Matching: VAGC = 0 V to 3 V in 0.5 V Steps Receiver Gain Output Return Loss Parts List for 1.2 GHz Matching Component Value Case Style Component Value Case Style Ferrite Bead 0402 R8 200 Ω 0402 L9 - L10 8.2 nH w/w 0402 R9 - R10 120 Ω 0402 L11 8.2 nH 0402 R11 - R12 39 Ω 0402 L12 33 nH 0402 R13 82 Ω 0402 L13 - L14 10 nH 0402 R14 180 Ω 0402 C1 - C12 10 nF 0402 R15 - R16 12 Ω 0402 C13 - C14 3.9 pF 0402 R17 - R18 47 Ω 0402 C15 3.0 pF 0402 R19 - R20 62 Ω 0402 C16 - C17 0.5 pF 0402 R21 6.2 Ω 0402 C18 - C22 1.0 µF 0603 R22 1 kΩ 0603 R1 - R4 1 kΩ 0402 R23 470 Ω 0402 0402 19 1:1 Balun SM-118A L1 - L8 18 R5 - R7 680 Ω T1 18. Ferrite Bead from Murata, part number BLM15HD182SN. 19. MACOM Technology Solutions MABA-009210-CT1760 1:1 TX Line Balun. 10 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888 MAAM-010333 Optical Node RF Amplifier 50 - 1200 MHz Rev. V5 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 11 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006888