MAAM-011182-TR1000

75 Ω, 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 Features • • • • • • Functional Schematic Single Stage, Single Ended, 8 V, 130 mA 18 dB Flat Gain Low Noise Low Distortion Performance Lead-Free 2 mm 8-lead PDFN Plastic Package RoHS* Compliant RFOUT 1 8 VFDBACK N/C 2 7 N/C N/C 3 6 N/C 4 5 Applications • CATV Description VBIAS_IN The MAAM-011182 is an RF amplifier assembled in a 2 mm 8-lead PDFN plastic package. This amplifier provides 18 dB of ultra flat gain while biased at 8 volts. The amplifier provides excellent linearity. The MAAM-011182 provides high gain, low noise and low distortion making it ideally suited for 75  infrastructure applications. The MAAM-011182 is fabricated using GaAs pHEMT technology. Ordering Information 1,2 MAAM-011182 Bulk Packaging MAAM-011182-TR1000 1000 Part Reel MAAM-011182-TR3000 3000 Part Reel MAAM-011182-001SMB Sample Board RFIN Pin Configuration3 1 RFOUT RF Output (75 Ω) 2,3,6,7 N/C No Connection 4 VBIAS_IN Regulator Bias Input 5 RFIN RF Input (75 Ω) 8 VFDBACK Feedback Path 9 Pad3 RF and DC Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 1 * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0005356 75 Ω, 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 Electrical Specifications: Freq. = 50 - 1218 MHz, T A = 25°C, VDD= 8 V, Z0 = 75 Ω Parameter Test Conditions Units Min. Typ. Max. Gain 1218 MHz dB 18 18.5 19 Tilt — dB 0 0.3 1 Reverse Isolation — dB — 21.5 — Input Return Loss — dB — 20 — Output Return Loss — dB — 19 — Noise Figure 50 - 100 MHz 100 - 1218 MHz dB — — 2.7 2.5 3.8 3.0 Output IP2 50 - 1200 MHz, tone spacing 6 MHz, POUT per tone = -10 dBm dBm — 66 — Output IP3 50 - 1200 MHz, tone spacing 6 MHz, POUT per tone = -10 dBm dBm — 38 — P1dB — dBm — 24 — Composite Triple Beat, CTB 79 channels, 0 dB Tilt, 34 dBmV per channel output QAM to 1200 MHz dBc — 76 -74 Composite Second Order, CSO 79 channels, 0 dB Tilt, 34 dBmV per channel output QAM to 1200 MHz dBc — 68 -66 IDD VDD = 8 V mA 125 130 135 Absolute Maximum Ratings4,5,6,7 Handling Procedures Please observe the following precautions to avoid damage: Input Power 12 dBm Operating Voltage 10 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these HBM Class1A, CDM Class IV devices. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. These operating conditions will ensure MTTF > 1 x 106 hours. 7. Junction Temperature (T J) = Case Temperature (TC) + Өjc*(V*I) Typical thermal resistance (ӨJC) = 43.3°C/W. a) For T C = 25°C, TJ = 71.7°C @ 8 V, 135 mA b) For T C = 85°C, TJ = 131.7°C @ 8 V, 135 mA 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0005356 75 Ω, 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 Schematic Including Off-Chip Components Parts List8 Component Value Package C1,C4,C7 10 nF 0402 C2 150 pF 0402 C3 100 nF 0402 C5 0.9 pF 0402 C6 0.4 pF 0402 C8 0.6 pF 0402 C9 1 µF 0603 L1 Ferrite Bead 0402 L2 10 nH 0402 L3 5.6 nH 0402 R1 1.6 kΩ 0402 R2 360 Ω 0402 R3 910 Ω 0402 R4 300 Ω 0402 Recommended PCB Layout 8. Ferrite Bead from Murata, part number BLM15HD182SN. PCB Land Pattern 2x2mm PDFN, 8-LEAD Metal Solder Mask 1.0 Solder mask extended 0.05mm on pads 0.3 2mm Outline 0.25 0.50 2.5 0.50 Thermal/GND Pad 10 vias 0.2-0.3 Solder mask reduced 0.05mm on GND pad 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0005356 75 Ω, 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 Typical Performance Curves: VDD = 8 V Gain to 2.5 GHz 20 25 19 20 18 15 S21 (dB) S21 (dB) Gain to 1.218 GHz 17 +25°C -40°C +85°C 16 15 0.0 0.2 0.4 0.6 0.8 10 +25°C -40°C +85°C 5 1.0 0 0.0 1.2 0.5 Frequency (GHz) 0 2.0 2.5 0 +25°C -40°C +85°C +25°C -40°C +85°C -10 S22 (dB) -10 S11 (dB) 1.5 Output Return Loss Input Return Loss -20 -30 -20 -30 -40 0.0 0.2 0.4 0.6 0.8 1.0 -40 0.0 1.2 0.2 Frequency (GHz) 0.4 0.6 0.8 1.0 1.2 1.0 1.2 Frequency (GHz) Noise Figure Reverse Isolation 0 5 Noise Figure (dB) +25°C -40°C +85°C -10 S12 (dB) 1.0 Frequency (GHz) -20 -30 -40 0.0 0.2 0.4 0.6 0.8 Frequency (GHz) 1.0 1.2 +25°C -40°C +85°C 4 3 2 1 0.0 0.2 0.4 0.6 0.8 Frequency (GHz) 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0005356 75 Ω, 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 Typical Performance Curves: VDD = 8 V CSO Lower 79 ch , 0 dB tilt, 34 dBmV per ch CSO Upper 79 ch , 0 dB tilt, 34 dBmV per ch 95 95 +25°C -40°C +85°C 85 80 75 70 65 60 +25°C -40°C +85°C 90 CSO Upper (dBc) CSO Lower (dBc) 90 85 80 75 70 65 0 100 200 300 400 500 600 Frequency (MHz) 60 0 100 200 300 400 500 600 Frequency (MHz) CTB 79 ch , 0 dB tilt, 34 dBmV per ch 95 +25°C -40°C +85°C 90 CTB (dBc) 85 80 75 70 65 60 0 100 200 300 400 500 600 Frequency (MHz) 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0005356 75 Ω, 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 Lead Free 2 mm 8-lead PDFN† † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0005356 75 Ω, 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 7 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0005356