MAAM-011220-TR1000

MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Functional Schematic Features         Rev. V1 Single Stage, Single Ended 8 V, 130 mA or 5 V, 110 mA Operation 18 dB Flat Gain Low Noise Low Distortion Performance Lead-Free SOT-89 Plastic Package Halogen-Free “Green” Mold Compound RoHS* Compliant Description The MAAM-011220 is an RF amplifier assembled in a SOT-89 plastic package. This amplifier provides 18 dB of ultra flat gain while biased at either 8 or 5 volts. The amplifier provides excellent linearity. The MAAM-011220 provides high gain, low noise and low distortion making it ideally suited for 75 Ω infrastructure applications. The MAAM-011220 pHEMT technology. is fabricated Pin Configuration using GaAs 1 RFIN RF Input 2 GND Ground 3 RFOUT RF Output / Drain Supply Ordering Information1,2 MAAM-011220-TR1000 1000 piece reel MAAM-011220-TR3000 3000 piece reel MAAM-011220-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Rev. V1 Electrical Specifications: Freq. = 45 - 1218 MHz, TA = 25°C, VDD= 8 V, Z0 = 75 Ω Parameter Test Conditions Units Min. Typ. Max. Gain 1218 MHz dB 18 18.5 20 Tilt 45 - 1218 MHz dB — 0.5 — Reverse Isolation — dB — 21.5 — Input Return Loss — dB — 20 — — dB — 24 — 4 3.1 Output Return Loss Noise Figure Output IP2 Output IP3 50 - 100 MHz 100 - 1218 MHz 45 - 1218 MHz, tone spacing 6 MHz, POUT per tone = -10 dBm 45 - 1218 MHz, tone spacing 6 MHz, POUT per tone = -10 dBm dB — 2.6 2.4 dBm — 66 — dBm — 38 — — dBm — 24 — dBc — P1dB 79 channels, 0 dB Tilt, 34 dBmV per channel output, QAM to 1000 MHz Composite Triple Beat, CTB Composite Second Order, CSO 132 channels, 15 dBmV per channel input 79 channels, 0 dB Tilt, 34 dBmV per channel output, QAM to 1000 MHz -73 -69 dBc — VDD = 8 V Absolute Maximum Ratings3,4,5,6 — -65 132 channels, 15 dBmV per channel input IDD — -71 mA 110 130 145 Handling Procedures Please observe the following precautions to avoid damage: Max Input Power 12 dBm Operating Voltage 10 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these HBM Class1A devices. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. MACOM does not recommend sustained operation near these survivability limits. 5. These operating conditions will ensure MTTF > 1 x 106 hours. 6. Junction Temperature (TJ) = Case Temperature (TC) + ӨJC*(V*I) Typical thermal resistance (ӨJC) = 50.4°C/W. a) For TC = 25°C, TJ = 67.5°C @ 8 V, 130 mA b) For TC = 85°C, TJ = 137.5°C @ 8 V, 130 mA 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Recommended PCB Layout Schematic Including Off-Chip Components Rev. V1 Parts List7 Component Value Package C1-C4 10 nF 0402 C5 0.9 pF 0402 C6 150 pF 0402 L1 10 nH 0402 L2 4.3 nH 0402 L3 Ferrite Bead 0402 L4 18 nH 0402 R1 8 kΩ 0402 R2 750 Ω 0402 R3 165 Ω 0402 R4 549 Ω 0402 R5 5 kΩ 0402 R6 0Ω 0402 7. Ferrite Bead from Murata, part number BLM15HD182SN. PCB Land Pattern 60 vias beneath package 0.012 in. via diameter 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Rev. V1 Typical Performance Curves: VDD = 8 V Gain to 1.218 GHz Gain to 3 GHz Input Return Loss Output Return Loss Reverse Isolation Noise Figure 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Rev. V1 Typical Performance Curves: VDD = 8 V CSO Lower 79 analog ch + QAM, 0 dB tilt, POUT = 34 dBmV per ch CSO Upper 79 analog ch + QAM, 0 dB tilt, POUT = 34 dBmV per ch CTB 79 analog ch + QAM, 0 dB tilt, POUT = 34 dBmV per ch CTB 132 analog ch, PIN = 15 dBmV per ch, +25°C CSO Lower 132 analog ch, PIN = 15 dBmV per ch , +25°C CSO Upper 132 analog ch, PIN = 15 dBmV per ch, +25°C 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Rev. V1 Electrical Specifications8: Freq. = 45 - 1218 MHz, TA = 25°C, VDD= 5 V, Z0 = 75 Ω Parameter Test Conditions Units Min. Typ. Max. Gain 1218 MHz dB — 18.5 — Tilt 45 - 1218 MHz dB — 0.5 — Reverse Isolation — dB — 21.5 — Input Return Loss — dB — 20 — Output Return Loss — dB — 24 — Noise Figure 50 - 100 MHz 100 - 1218 MHz dB — 2.6 2.4 — Output IP2 45 - 1218 MHz, tone spacing 6 MHz, POUT per tone = -10 dBm dBm — 64 — Output IP3 45 - 1218 MHz, tone spacing 6 MHz, POUT per tone = -10 dBm dBm — 37 — P1dB — dBm — 20 — dBc — Composite Triple Beat, CTB 79 channels, 0 dB Tilt, 34 dBmV per channel output, QAM to 1000 MHz -73 132 channels, 15 dBmV per channel input Composite Second Order, CSO 79 channels, 0 dB Tilt, 34 dBmV per channel output, QAM to 1000 MHz -67 dBc — VDD = 5 V — -65 132 channels, 15 dBmV per channel input IDD — -70 mA — 110 8. The same application circuit and component values are used for VDD=5V and VDD=8V operation. 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support — MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Rev. V1 Typical Performance Curves: VDD = 5 V Gain to 1.218 GHz Gain to 3 GHz Input Return Loss Output Return Loss Reverse Isolation Noise Figure 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Rev. V1 Typical Performance Curves: VDD = 5 V CSO Lower 79 analog ch + QAM, 0 dB tilt, POUT = 34 dBmV per ch CSO Upper 79 analog ch + QAM, 0 dB tilt, POUT = 34 dBmV per ch CTB 79 analog ch + QAM, 0 dB tilt, POUT = 34 dBmV per ch CTB 132 analog ch, PIN = 15 dBmV per ch, +25°C CSO Lower 132 analog ch, PIN = 15 dBmV per ch, +25°C CSO Upper 132 analog ch, PIN = 15 dBmV per ch, +25°C 8 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Rev. V1 Lead Free SOT-89† † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 9 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011220 75 Ω, High Linearity, Low Noise, CATV Amplifier 45 - 1218 MHz Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 10 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support