MAAMSS0041TR

MAAMSS0041 Broadband CATV Amplifier 50 - 1000 MHz Rev. V4 Features         Functional Schematic 75 Ω Input / Output Match CTB: -80 dBc Noise Figure: 2.7 dB Gain: 14.8 dB Lead Free SOT-89 Package Halogen-Free “Green” Mold Compound 260°C Re-flow Compatible RoHS* Compliant Version of MAAMSS0031 GND Description The MAAMSS0041 CATV amplifier is a GaAs MMIC which exhibits low distortion in a lead-free surface mount plastic package. The MAAMSS0041 employs a monolithic single stage design featuring a convenient 75 Ω input/output impedance that minimizes the number of external components required. Pin 1 RFIN GND RFOUT Pin Configuration The MAAMSS0041 provides low noise and high linearity. It is ideally suited for set top boxes, home gateways, and other broadband internet based appliances. Pin No. Pin Name Description 1 RFIN RF Input 2 GND Ground The MAAMSS0041 is fabricated using M/A-COM’s PHEMT process to realize low noise and low distortion. The process features full passivation for robust performance and reliability. 3 RFOUT RF Output / Drain Supply Absolute Maximum Ratings 3,4,5 Ordering Information1,2 Part Number Package MAAMSS0041 Lead Free SOT-89 Plastic Package MAAMSS0041TR-3000 3000 Piece Tape and Reel MAAMSS0041SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Parameter Absolute Maximum RF Input Power 15 dBm Voltage 10.0 volts Operating Temperature Junction Temperature 6 Storage Temperature -40°C to +85°C +150°C -65°C to +150°C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 5. These operating conditions will ensure MTTF > 1 x 106 hours. 6. Junction Temperature (TJ) = TC + Өjc * (V * I) Typical thermal resistance (Өjc) = 75° C/W. a) For TC = 25°C, TJ = 85°C @ 8 V, 100 mA b) For TC = 85°C, TJ = 139 °C @ 8 V, 90 mA * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAMSS0041 Broadband CATV Amplifier 50 - 1000 MHz Rev. V4 Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = +8 Volts, Z0 = 75 Ω Parameter Test Conditions Units Min. Typ. Max. Gain dB 14.0 14.8 16.0 Gain Flatness dB — 0.5 1.0 Noise Figure dB — 2.7 3.8 Input Return Loss dB — 20 — Output Return Loss dB — 18 — Output IP3 6 MHz Spacing, -10 dBm output per tone dBm — 36 — Composite Triple Beat, CTB 132 channels, +23 dBmV/channel at the output. dBc — -80 — Composite Second Order, CSO 132 channels, +23 dBmV/channel at the output. dBc — -70 — dBm — 23 — mA — 100 130 P1dB IDD + 8 Volts Schematic Including Off-Chip Components Recommended Board Layout Pin 1 L3 RF IN L2 C5 C1 C4 L1 R1 RF OUT C2 VDD C3 Off-Chip Component Values Component Value Package C1 - C4 0.01 µF 0402 C5 0.5 pF 0402 1000 nH 1210 L2 8.2 nH 0402 L3 5.6 nH 0402 R1 523 Ω 0402 L1 7 7. L1 supplied from EPCOS, part number B82422A1102K100. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAMSS0041 Broadband CATV Amplifier 50 - 1000 MHz Rev. V4 Typical Performance Curves Gain vs. Frequency over Temperature to 1 GHz Gain vs. Frequency over Temperature to 3 GHz 16.0 20 15.5 15 15.0 10 14.5 5 14.0 -40°C +25°C +85°C 0 -40°C +25°C +85°C 13.5 -5 13.0 -10 0.0 0.2 0.4 0.6 0.8 1.0 0.0 0.5 1.0 Frequency (GHz) 1.5 2.0 2.5 3.0 Frequency (GHz) Input Return Loss vs. Frequency over Temperature Output Return Loss vs. Frequency over Temperature 0 0 -40°C +25°C +85°C -10 -10 -20 -20 -30 -30 -40°C +25°C +85°C -40 -40 0.0 0.2 0.4 0.6 0.8 1.0 0.0 0.3 0.5 0.8 1.0 Frequency (GHz) Frequency (GHz) Noise Figure vs. Frequency 5.0 4.0 3.0 2.0 1.0 0.0 0.0 0.2 0.4 0.6 0.8 1.0 Frequency (GHz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAMSS0041 Broadband CATV Amplifier 50 - 1000 MHz Rev. V4 Lead Free SOT-89 Plastic Package† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAMSS0041 Broadband CATV Amplifier 50 - 1000 MHz Rev. V4 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support