MAAMSS0044TR

MAAMSS0044 Push Pull CATV Amplifier 50 - 1000 MHz Rev. V1 Features        Functional Schematic Low Distortion Low Noise Figure Push Pull Design Single Positive Supply Lead-Free 4 mm 20-Lead PQFN package Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible RFOUT1 N/C N/C N/C Description M/A-COM’s MAAMSS0044 is a GaAs PHEMT MMIC amplifier in a lead-free 4 mm 20-lead PQFN package. The MMIC design is configured as a pair of cascode PHEMT amplifiers for broadband performance. It is designed for integration in a 75 Ω push-pull, low distortion, amplifier circuit. The device is ideally suited for use in CATV, FTTX, DBS, and HDTV applications where low noise figure and low distortion are required. Ordering Information N/C RFOUT2 1 N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C RFIN1 N/C RFIN2 Pin Configuration 3 Pin No. 1,2 Pin Name Description 1 4 N/C No Connection 2 N/C No Connection 3 N/C No Connection 4 N/C No Connection 5 N/C No Connection 6 RFIN1 RF Input 1 7 N/C No Connection Part Number Package MAAMSS0044 Bulk Packaging MAAMSS0044TR 1000 Piece Reel 8 N/C No Connection MAAMSS0044TR-3000 3000 Piece Reel 9 No Connection 10 MAAMSS0044SMB Sample Board 50 - 1000 MHZ Tuning N/C RFIN2 11 N/C No Connection 12 N/C No Connection 13 14 15 N/C N/C N/C No Connection No Connection No Connection 16 RFOUT2 RF Output 2 17 N/C No Connection 18 N/C No Connection 19 N/C RFOUT1 No Connection 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 20 RF Input 2 RF Output 1 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. 4. It is recommended, but not absolutely compulsory, that all No Connections (N/C) within the IC are connected to the ground on the printed circuit board. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAMSS0044 Push Pull CATV Amplifier 50 - 1000 MHz Rev. V1 Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = +5 Volts, Z0 = 75 Ω, Test Circuit with M/A-COM Balun MABACT0069 Parameter Test Conditions Units Min. Typ. Max. Gain — dB 11 12.5 13.5 Gain Flatness — dB — 0.8 1.3 Noise Figure — dB — 3.7 5 Input Return Loss — dB — 15 — Output Return Loss — dB — 15 — Output IP2 400 MHz, +4 dBm output dBm — 75 — Output IP3 Two tones at 397 & 403 MHz, +8 dBm output/tone dBm — 42 — Composite Triple Beat, CTB 79 Channels, +34 dBmV / Channel at the output 77 Channels, +39 dBmV / Channel at the output dBc dBc — — -75 -65 -70 — Composite Second Order, CSO 79 Channels, +34 dBmV / Channel at the output 77 Channels, +39 dBmV / Channel at the output dBc dBc — — -85 -75 -80 — Cross modulation 79 Channels, +34 dBmV / Channel at the output 77 Channels, +39 dBmV / Channel at the output dBc dBc — — -75 -65 — — P1dB 400 MHz dBm — 24 — IDD +5 Volts mA — 225 280 Absolute Maximum Ratings 5,6,7 Parameter Absolute Maximum Input Power +20 dBm Operating Voltage +10 volts Operating Temperature -40°C to +85°C Junction Temperature 8 Storage Temperature 150°C -65°C to +150°C 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM does not recommend sustained operation near these survivability limits. 7. These operating conditions will ensure MTTF > 1 x 106 hours. 8. Junction Temperature (TJ) = TC + Өjc * ((V * I) - (POUT - PIN)) Typical thermal resistance (Өjc) = 39° C/W. a) For TC = 25°C, TJ = 69 °C @ 5 V, 225 mA b) For TC = 85°C, TJ = 129 °C @ 5 V, 225 mA Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAMSS0044 Push Pull CATV Amplifier 50 - 1000 MHz Rev. V1 Parts List9 PCB Land Pattern Component Value Package C1 - C4 0.01 µF 0402 C5 0.8 pF 0402 C6 1 pF 0402 C7 - C10 0.01 µF 0402 L1 5.6 nH 0402 L2 6.8 nH 0402 L3, L4 470 nH 1008 R1, R2 300 Ω 0402 9. The 1:1 Baluns, T1 &T2 are M/A-COM part number MABACT0069 Application Schematic Sample Board C9 C7 R1 VDD C9 L3 C7 RFIN L1 C4 C1 L1 R1 L3 C4 C1 C5 C6 T2 T1 L2 C3 C2 RFOUT C5 C2 C6 C3 T1 L4 C8 R2 VDD C10 C8 L4 R2 T2 C10 Lead Free 4 mm 20-lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support L2 MAAMSS0044 Push Pull CATV Amplifier 50 - 1000 MHz Rev. V1 Typical Performance Curves Gain vs. Frequency Gain vs. Frequency to 3 GHz 20 14 +25°C -40°C +85°C +25°C -40°C +85°C 15 13 10 5 12 0 11 -5 10 -10 0 250 500 750 1000 0 500 1000 Frequency (MHz) 1500 2000 2500 3000 Frequency (MHz) Input Return Loss vs. Frequency Output Return Loss vs. Frequency 0 0 -5 -10 -10 -20 -15 -30 -20 +25°C -40°C +85°C -40 +25°C -40°C +85°C -25 -50 -30 0 250 500 750 1000 Frequency (MHz) 0 250 500 750 1000 Frequency (MHz) Noise Figure vs. Frequency 5 +25°C 4 3 2 1 0 0 250 500 750 1000 Frequency (MHz) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAMSS0044 Push Pull CATV Amplifier 50 - 1000 MHz Rev. V1 Typical Performance Curves Composite Triple Beat, 79 Channels +34 dBm/channel Output Composite Triple Beat, 77 Channels +39 dBm/channel Output -60 -60 -65 -65 -70 -70 -75 -75 -80 -80 -85 -85 -90 -90 -95 -95 -100 0 100 200 300 400 500 600 -100 0 100 Frequency (MHz) -60 -65 -65 -70 -70 -80 -80 -85 -85 -90 -90 -95 -95 -100 200 300 400 Frequency (MHz) 500 600 500 CSO_Low CSO_High -75 CSO_Low CSO_High 100 400 Composite Second Order Low and High, 77 Channels +39 dBm/channel Output -60 0 300 Frequency (MHz) Composite Second Order Low and High, 79 Channels +34 dBm/channel Output -75 200 600 -100 0 100 200 300 400 500 600 Frequency (MHz) 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAMSS0044 Push Pull CATV Amplifier 50 - 1000 MHz Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 6 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support