MAAP-010169-001SMB

MAAP-010169 10 W Power Amplifier 2 - 6 GHz V1 Functional Schematic Features       +41 dBm Saturated Output Power Linear Gain: 18 dB Power Added Efficiency: 30% at PSAT 50  Input / Output Match Ceramic Flange Mount Package RoHS* Compliant and 260°C Re-flow Compatible MAAP-010169 Description The MAAP-010169 is a two stage MMIC power amplifier designed for broadband high power applications. It can be used as either a driver or an output stage amplifier. This device is fully matched input and output to 50 Ω which eliminates any sensitive external RF tuning components. The device is packaged in a lead free 10-lead flanged package for high volume manufacturing. The MAAP-010169 is fabricated using a high reliability pHEMT process, to realize good power added efficiency and gain. The pHEMT process features full passivation for high performance and reliability. Ordering Information1 Part Number Package MAAP-010169-000000 Bulk 1. Reference Application Note M567 for package handling and mounting procedure. Pin Configuration2 Pin No. Function 1 VGG2 2 VGG1 3 RF Input 4 VGG1 5 VGG2 6 VDD1 7 VDD2 8 RF Output 9 VDD2 10 VDD1 2. Flange is DC and RF ground. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MAAP-010169 10 W Power Amplifier 2 - 6 GHz V1 Electrical Specifications: Freq. = 2 - 6 GHz, VDD = 10 V, IDQ = 3.5 A, TA = +25 °C, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Gain — dB 14 18 — Input Return Loss — dB — 8 — Output Return Loss — dB — 10 — P1dB — dBm — 38 — PSAT — dBm — 40 — PAE PSAT % — 30 — Duty Cycle — % — — 100 Gate Bias Voltage V — -0.56 — Current IDQ PSAT A — 3.5 5.5 — Absolute Maximum Ratings 3,4,5 Parameter Absolute Maximum Input Power +26 dBm Operating Supply Voltage +11 Volts Operating Gate Voltage -2 V < VGG < 0 V Operating Temperature6 -40°C to +25°C Channel Temperature7 +150 °C Storage Temperature -65°C to +150°C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 5. Operating at nominal conditions with TJ ≤ +150°C will ensure MTTF > 1 x 106 hours. 6. Operating temperatures >25°C will require regulation of dissipated power to maintain TJ ≤ 150°C. Refer to the Max. Power Dissipation vs. Base Plate Temperature curve on page 6. 7. Junction Temperature (TJ) = TC + ӨJC * ((V * I) - (POUT - PIN)) Typical thermal resistance (ӨJC) = 2.8°C/W a) For TC = 25°C, 4 GHz TJ = +130°C @ +10 V, 5.3 A, POUT = 42 dBm, PIN = 24 dBm Recommended Bias Configuration VDD RFOUT VDD 0.1 to 1.0 µF MAAP-010169 VGG RFIN VGG 0.1 to 1.0 µF Operating the MAAP-010169 The MAAP-010169 is static sensitive. Please handle with care. To operate the device, follow these steps. Ramp down or shutdown in reverse order (gate bias on first and off last). All VGG pins should have the same voltage applied at all times. 1. Apply VGG (-1.5 V). 2. Apply VDD (10 V Typical). 3. Set IDQ by adjusting VGG. 4. Apply RFIN. 2 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MAAP-010169 10 W Power Amplifier 2 - 6 GHz V1 Typical Performance Curves Gain Reverse Isolation 30 0 +25 C -40 C +85 C 25 +25 C -40 C +85 C -20 -40 20 -60 15 10 -80 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 -100 2.0 2.5 3.0 Frequency (GHz) 4.0 4.5 5.0 5.5 6.0 5.5 6.0 Output Return Loss Input Return Loss 0 0 +25 C -40 C +85 C -5 -10 -15 -15 2.0 2.5 3.0 3.5 4.0 4.5 5.0 +25 C -40 C +85 C -5 -10 -20 3.5 Frequency (GHz) 5.5 6.0 -20 2.0 2.5 3.0 Frequency (GHz) 3.5 4.0 4.5 5.0 Frequency (GHz) Output Power (dBm) Output Power (W) 50 24 +25 C -40 C +85 C 45 20 16 40 12 8 35 +25 C -40 C +85 C 4 30 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency (GHz) 5.5 6.0 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency (GHz) 3 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 5.5 6.0 MAAP-010169 10 W Power Amplifier 2 - 6 GHz V1 Typical Performance Curves Efficiency @ 2 GHz Power Gain 25 50 +25 C -40 C +85 C 40 20 30 15 20 +25 C -40 C +85 C 10 5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 10 5.5 6.0 0 0 5 10 Power Added Efficiency 20 25 20 25 20 25 Efficiency @ 4 GHz 50 50 +25 C -40 C +85 C 40 30 20 20 10 10 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 +25 C -40 C +85 C 40 30 0 15 Input Power (dBm) Frequency (GHz) 6.0 0 0 5 10 15 Input Power (dBm) Frequency (GHz) Efficiency @ 6 GHz Drain Current 8 50 7 +25 C -40 C +85 C 40 6 5 30 4 20 3 +25 C -40 C +85 C 2 10 1 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency (GHz) 5.5 6.0 0 0 5 10 15 Input Power (dBm) 4 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MAAP-010169 10 W Power Amplifier 2 - 6 GHz V1 Typical Performance Curves Output Power Sweep @ 2 GHz Power Gain @ 2 GHz 50 26 +25C -40C +85C 24 +25 C -40 C +85 C 45 22 40 20 35 18 16 30 14 25 12 10 26 28 30 32 34 36 38 40 42 44 46 20 0 5 10 15 20 25 20 25 20 25 Input Power (dBm) Output Power (dBm) Power Gain @ 4 GHz Output Power Sweep @ 4 GHz 26 50 +25 C -40 C +85 C 24 +25 C -40 C +85 C 45 22 40 20 18 35 16 30 14 25 12 10 26 28 30 32 34 36 38 40 42 44 46 20 0 5 Output Power (dBm) 10 15 Input Power (dBm) Power Gain @ 6 GHz Output Power Sweep @ 6 GHz 26 50 +25 C -40 C +85 C 24 +25 C -40 C +85 C 45 22 40 20 18 35 16 30 14 25 12 10 26 28 30 32 34 36 38 40 42 Output Power (dBm) 44 46 20 0 5 10 15 Input Power (dBm) 5 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MAAP-010169 10 W Power Amplifier 2 - 6 GHz V1 Typical Performance Curves Junction Temperature vs. Base Plate Temperature with 45 W Power Dissipation Max. Power Dissipation vs. Base Plate Temperature8 60 300 50 250 40 200 30 150 20 100 10 50 0 0 0 30 60 90 120 150 0 15 30 Base Plate Temperature (°C) 45 60 75 90 105 120 135 150 Base Plate Temperature (°C) 8. Power dissipation should not exceed the maximum plot shown above to maintain TJ