MAAP-010171-001SMB

MAAP-010171 Amplifier, Power, 8 W 2.5 - 3.5 GHz Rev. V3 VG2a VD1a VD2a VD2a 17 16 1 15 GND GND 2 14 GND RFIN 3 13 RFOUT GND 4 12 GND GND 5 11 GND 6 7 8 9 10 VD2b GND It is ideally suited for Air Traffic Control, Weather, Military and S-band radar applications. Each device is 100% RF tested to ensure performance compliance. 18 VD2b The MAAP-010171 is a 2-stage, 8 W saturated S-band power amplifier in a 5mm 20 lead PQFN package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power pulsed applications. 19 VD1b Description 20 VG2b Linear Gain: 27 dB Saturated Output Power: +39 dBm Pulsed 50 Ω Input / Output Match Lead-Free 5 mm 20-lead PQFN Package Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible VG1b       VG1a Functional Schematic Features Pin Configuration2 Pin No. Function Pin No. Function 1 Ground 11 Ground 2 Ground 12 Ground 3 RFIN 13 RFOUT 4 Ground 14 Ground Ordering Information1 Part Number Package MAAP-010171-TR0500 500 piece reel 5 Ground 15 Ground MAAP-010171-TR1000 1000 piece reel 6 VG1b 16 VD2a MAAP-010171-000SMB Sample Board 7 VG2b 17 VD2a 8 VD1b 18 VD1a 9 VD2b 19 VG2a 10 VD2b 20 VG1a 21 Paddle3 1. Reference Application Note M513 for reel size information. 2. MACOM recommends connecting unused package pins to ground. 3. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-010171 Amplifier, Power, 8 W 2.5 - 3.5 GHz Rev. V3 Electrical Specifications: Freq. 2.5 - 3.5 GHz, VDD = 9 V Pulsed, 100 µs Pulse Width, 10% Duty Cycle, Z0 = 50 Ω Parameter Units Min. Typ. Max. Gain dB 25 27 — Input Return Loss dB — 10 — Output Return Loss dB — 10 — PSAT dBm 37 39 — Small Signal Current (IDD) A — 1 — Efficiency % — 38 — Absolute Maximum Ratings4,5 Parameter Absolute Maximum Input Power 22 dBm Supply Voltage 11 V Gate Current 25 mA Duty Cycle 50 % Operating Temperature Junction Temperature 6,7 Storage Temperature -40°C to +85°C +150°C -55°C to +150°C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Operating at nominal conditions with TJ ≤ 150°C will ensure MTTF > 1 x 106 hours. 7. Junction Temperature (TJ) = TC + ӨJC * (V * I). Typical thermal resistance (ӨJC) = 5.75°C/W Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these class 1A devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-010171 Amplifier, Power, 8 W 2.5 - 3.5 GHz Rev. V3 Recommended PCB Layout Schematic VG1a VG2a VD1a VD2a VG1a 2 4 6 8 10 12 14 16 18 20 1 3 5 7 9 C18 C17 C1 C2 C19 C5 C10 C15 C6 C9 C16 19 18 17 16 1 15 2 14 3 13 4 12 5 11 6 7 8 VD2a J3 C20 20 RFin 11 13 15 17 19 VG2a VD1a 9 RFout RFin RFout 10 21 C3 C7 C11 C13 C4 C8 C12 C14 C22 C21 C23 C24 2 4 6 8 10 12 14 16 18 20 1 3 5 7 9 11 13 15 17 19 J4 VG1b VG1b VG2b VD1b VG2b VD1b VD2b VD2b Operating the MAAP-010171 Parts List Component Value Package C1, C4, C5, C8, C10, C12, C14, C15 1000 pF 0402 C2, C3, C6, C7, C9, C11, C13, C16 100 pF 0402 C17, C18, C21, C22 1 µF 0805 C19, C20, C23, C24 10 nF 0805 To operate, follow these steps. 1. Apply VG between -1 V and -0.5 V to set IDQ to 1 A 2. Apply VDD Pulsed 3. Apply RF Power ON 4. The RF ports (pins 3 & 13) are not DC blocked. Do not apply DC voltage directly onto these pins. 5. Ramp down or shut down in reverse order. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-010171 Amplifier, Power, 8 W 2.5 - 3.5 GHz Rev. V3 Typical Performance Curves Small Signal Gain S-Parameters 30 30 S21 S11 S22 20 29 28 10 27 0 26 25 -10 24 -20 -30 +25°C -40°C +85°C 23 0 1 2 3 4 5 6 22 2.0 2.5 Frequency (GHz) Output Power, Pin = 19 dBm @ +25°C 3.5 4.0 3.5 4.0 Output Power, Pin = 19 dBm @ -40°C 41 41 40 40 39 39 38 38 37 37 Vdd = 8 V Vdd = 9 V Vdd = 10 V 36 35 3.0 Frequency (GHz) 2.0 2.5 Vdd = 8 V Vdd = 9 V Vdd = 10 V 36 3.0 3.5 4.0 Frequency (GHz) 35 2.0 2.5 3.0 Frequency (GHz) Output Power, Pin = 19 dBm @ +85°C 41 40 39 38 37 Vdd = 8 V Vdd = 9 V Vdd = 10 V 36 35 4 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-010171 Amplifier, Power, 8 W 2.5 - 3.5 GHz Rev. V3 Typical Performance Curves Output Power @ 2.5 GHz Output Power, VDD = 8 V 10 10 Vdd = 8 V Vdd = 9 V Vdd = 10 V 8 6 6 4 4 2 2 0 0 4 2.3 GHz 2.5 GHz 2.7 GHz 2.9 GHz 3.1 GHz 3.3 GHz 3.5 GHz 3.7 GHz 8 8 12 16 20 0 0 4 8 Input Power (dBm) Output Power @ 3.1 GHz Vdd = 8 V Vdd = 9 V Vdd = 10 V 6 6 4 4 2 2 0 4 16 20 16 20 2.3 GHz 2.5 GHz 2.7 GHz 2.9 GHz 3.1 GHz 3.3 GHz 3.5 GHz 3.7 GHz 8 8 12 16 20 0 0 4 Input Power (dBm) 8 12 Input Power (dBm) Output Power @ 3.5 GHz Output Power, VDD = 10 V 10 10 Vdd = 8 V Vdd = 9 V Vdd = 10 V 8 5 20 10 8 6 4 4 2 2 0 4 2.3 GHz 2.5 GHz 2.7 GHz 2.9 GHz 3.1 GHz 3.3 GHz 3.5 GHz 3.7 GHz 8 6 0 16 Output Power, VDD = 9 V 10 0 12 Input Power (dBm) 8 12 Input Power (dBm) 16 20 0 0 4 8 12 Input Power (dBm) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-010171 Amplifier, Power, 8 W 2.5 - 3.5 GHz Rev. V3 Typical Performance Curves PAE 44 Vdd = 8 V Vdd = 9 V Vdd = 10 V 42 40 38 36 34 32 30 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) 1st Stage Gate Current @ 2.9 GHz 2nd Stage Gate Current @ 2.9 GHz 0 25 -20 20 -40 Vdd = 8 V Vdd = 9 V Vdd = 10 V 15 -60 10 -80 5 Vdd = 8 V Vdd = 9 V Vdd = 10 V -100 0 -120 -140 0 4 8 12 16 20 -5 0 4 Input Power (dBm) 8 12 16 20 Input Power (dBm) Drain Current @ 2.9 GHz Small Signal Drain Current @ 2.9 GHz 2.8 1.2 2.4 Vdd = 8 V Vdd = 9 V Vdd = 10 V +25°C -40°C +85°C 1.1 2.0 1.0 1.6 0.9 1.2 0.8 6 0 4 8 12 Input Power (dBm) 16 20 0.8 8.0 8.5 9.0 9.5 VDD (V) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 10 MAAP-010171 Amplifier, Power, 8 W 2.5 - 3.5 GHz Rev. V3 Lead-Free 5 mm 20-Lead PQFN† NOTES: 1. Reference JEDEC M0-220, VAR VHHC for additional dimensions and tolerance information. 2. Reference S2083 application note for PCB footprint information. 3. All dimensions shown as inches/mm. † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAP-010171 Amplifier, Power, 8 W 2.5 - 3.5 GHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 8 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support