MAAP-011027

Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 VD1a VD2a VD2a Linear Gain: 20 dB Saturated Output Power: 39 dBm Pulsed 50 Ω Input / Output Match Lead-Free 5 mm 20-lead PQFN Package RoHS* Compliant VG2a • • • • • VG1a Functional Schematic Features 20 19 18 17 16 • Point-to-Point Radios • C-Band Radar GND 2 14 GND RFIN 3 13 RFOUT GND 4 12 GND GND 5 11 GND Description The MAAP-011027 is a 2-stage, 8 W saturated C-band power amplifier in a 5 mm 20 lead PQFN package, allowing for easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power pulsed applications. Each device is 100% RF tested to ensure performance compliance. 6 7 8 9 10 VD2b GND VD2b 15 VD1b 1 VG2b GND VG1b Applications Pin Configuration2 Ordering Information1 1,2,4,5,11, 12,14,15, Ground 13 RFOUT 3 RFIN 16,17 VD2a Part Number Package 6 VG1b 18 VD1a MAAP-011027-TR0500 500 piece reel 7 VG2b 19 VG2a MAAP-011027-TR1000 1000 piece reel 8 VD1b 20 VG1a MAAP-011027-000SMB Sample Board 9,10 VD2b 21 Paddle3 1. Reference Application Note M513 for reel size information. 2. MACOM recommends connecting unused package pins to ground. 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492 Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Electrical Specifications: Freq. 5.2 - 5.9 GHz, VDD = 9 V Pulsed, 100 µs Pulse Width,10% Duty Cycle , Z0 = 50 Ω Gain dB 17 20 — Input Return Loss dB — 10 — Output Return Loss dB — 10 — PSAT dBm 37 39 — Pulse Period µs — 100 — Pulse Duty Cycle % — 10 — Efficiency % — 37 — Small Signal Current A — 1 — Maximum Operating Ratings4,5,6 Handling Procedures Please observe the following precautions to avoid damage: Input Power 28 dBm Supply Voltage 11 V Junction Temperature7 +150 °C Operating Temperature -40°C to +85°C Storage Temperature -55°C to +150°C Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these class 1A devices. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Operating at nominal conditions with TJ ≤ +150°C will ensure MTTF > 1 x 106 hours. 7. Junction Temperature (TJ) = TC + ӨJC * (V * I) Typical CW thermal resistance (ӨJC) = 7.7°C/W 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492 Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Recommended PCB Layout Schematic VGG1 VGG2 VDD1 C17 C18 C5 C6 C9 C10 C1 C2 C16 C15 20 19 18 17 16 15 2 14 3 MAAP-010171 13 4 12 11 5 6 7 8 9 10 VDD2 C20 C19 1 RFIN C4 RFOUT 21 C3 C13 C8 C14 C7 C11 C12 Parts List Operating the MAAP-011027 Component Value Package C2, C3, C5, C7, C9, C11, C13, C16 100 pF 0402 C1, C4, C6, C8, C10, C12, C14, C15 1000 pF 0402 C17, C18, C21, C22 1 µF 0805 C19, C20, C23, C24 10 nF 0805 To operate the MAAP-011027, follow these steps. Ramp down or shut down in reverse order. 1. Apply VG between -1 V and -0.5 V to set IDQ to 1 A 2. Apply RF Power ON 3. Apply VDD Pulsed 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492 Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Typical Performance Curves over Temperature Reverse Isolation Gain -40 30 +25°C -40°C +85°C 25 -45 20 -50 15 -55 10 5.0 5.2 5.4 5.6 5.8 6.0 -60 +25°C -40°C +85°C 5.0 5.2 5.4 5.8 6.0 5.8 6.0 Output Return Loss Input Return Loss 0 0 -5 -5 -10 -10 -15 -15 +25°C -40°C +85°C -20 -20 +25°C -40°C +85°C -25 -30 5.6 Frequency (GHz) Frequency (GHz) 5.0 5.2 -25 5.4 5.6 5.8 6.0 -30 5.0 5.2 5.6 Frequency (GHz) Frequency (GHz) Output Power Power Added Efficiency 41 50 +25°C -40°C +85°C 40 40 38 35 5.0 5.2 5.4 5.6 Frequency (GHz) 5.8 +25°C -40°C +85°C 45 39 37 5.4 6.0 30 5.0 5.2 5.4 5.6 5.8 6.0 Frequency (GHz) 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492 Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Typical Performance Curves over Voltage Reverse Isolation Gain -40 30 6V 7V 8V 9V 10 V 25 -45 -50 20 -55 15 10 6V 7V 8V 9V 10 V -60 5.0 5.2 5.4 5.6 5.8 6.0 5.0 5.2 0 0 -5 -5 -10 -10 -15 -15 -30 5.0 5.2 6.0 6V 7V 8V 9V 10 V -25 5.4 5.6 5.8 6.0 -30 5.0 5.2 Frequency (GHz) 5.4 5.6 5.8 6.0 Frequency (GHz) Output Power Power Added Efficiency 41 50 8V 9V 10 V 40 45 39 40 38 35 37 5.8 -20 6V 7V 8V 9V 10 V -25 5.6 Output Return Loss Input Return Loss -20 5.4 Frequency (GHz) Frequency (GHz) 5.0 5.2 5.4 5.6 Frequency (GHz) 5.8 6.0 30 8V 9V 10 V 5.0 5.2 5.4 5.6 5.8 6.0 Frequency (GHz) 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492 Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Typical Performance Curves Power Added Efficiency vs. Output Power Power Gain vs. Input Power 24 40 21 30 18 20 5.2 GHz 5.6 GHz 5.9 GHz 15 12 -5 0 5 5.2 GHz 5.6 GHz 5.9 GHz 10 10 15 20 25 0 -5 0 5 Input Power (dBm) 40 21 30 18 20 8V 9V 10 V -5 0 5 10 10 15 20 25 0 -5 0 5 40 21 30 18 20 +25°C -40°C +85°C 0 5 15 20 25 Power Added Efficiency vs. Input Power @ 5.6 GHz 24 -5 10 Input Power (dBm) Power Gain vs. Input Power @ 5.6 GHz 12 25 8V 9V 10 V Input Power (dBm) 15 20 Power Added Efficiency vs. Input Power @ 5.6 GHz 24 12 15 Input Power (dBm) Power Gain vs. Input Power @ 5.6 GHz 15 10 +25°C -40°C +85°C 10 10 15 Input Power (dBm) 20 25 0 -5 0 5 10 15 20 25 Input Power (dBm) 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492 Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Typical Performance Curves Small Signal wideband performance Drain Current vs. Input Power @ T = +25°C, F = 5.6 GHz 3000 60 S11 S21 S12 S22 40 2500 8V 9V 10V 20 2000 0 1500 -20 1000 -40 -60 4.6 5.0 5.4 5.8 6.2 6.6 500 -5 0 Power Dissipation8 vs. Case Temperature9,10 3000 8 2500 6 2000 4 1500 2 1000 0 25 50 75 100 10 15 20 25 Drain Current vs. Input Power @ T = +25°C, VD = 9 V 10 0 5 Input Power (dBm) Frequency (GHz) 125 150 500 5.2 GHz 5.6 GHz 5.9 GHz -5 0 Case Temperature (°C) 8. Average dissipated power: PDISS = PDC + PIN - POUT (all powers are average in Watts) 9. Average power is integrated over pulse period, for short pulses (not exceeding pulse width of 100 µs), average power can be approximated as PAVERAGE = PPEAK*D, where D is duty cycle. 10.For pulses wider than 100 µs self heating during pulse reduces allowable average dissipated power. 5 10 15 20 25 Input Power (dBm) Drain Current vs. Input Power @ F = 5.6 GHz, VD = 9 V 3000 +85C +25C -40C 2500 2000 1500 1000 500 -5 0 5 10 15 20 25 Input Power (dBm) 7 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492 Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Lead-Free 5 mm 20-Lead PQFN† NOTES: 1. Reference JEDEC M0-220, VAR VHHC for additional dimensions and tolerance information. 2. Reference S2083 application note for PCB footprint information. 3. All dimensions shown as inches/mm. † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level (MSL) 3 requirements. Plating is 100% matte tin over copper. 8 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492 Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 9 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0004492