MAAP-011232-002SMB

1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Features GND RFOUT / VD2 GND 14 13 N/C 1 12 N/C N/C 2 11 N/C N/C 3 10 N/C N/C 4 9 N/C 5 6 7 8 GND LMR MILCOM SATCOM Sensors & Telemetry Test & Measurement 15 RFIN • • • • • 16 GND Applications VG1 Functional Schematic Gain: 24.5 dB P-1dB: 29 dBm PSAT: 30 dBm PAE at PSAT: 40% OIP3: 40 dBm Bias Conditions: 9 V, 265 mA Fully Matched Output Lead-Free 3 mm 16-LD PQFN package RoHS* Compliant VD1 • • • • • • • • • Description The MAAP-011232 is a 2-stage power amplifier with gain shut off, operating from 100 MHz to 3 GHz. For operation in the 100 MHz to 1 GHz frequency range no I/O matching is required. Internal DC blocking is provided at the input, while the RF output port is DC coupled through an external bias-tee. Bias current, RF gain and output power are controlled with a gate bias voltage (VG). Typical current consumption is 1 x 106 hours. 8. Junction Temperature (TJ) = TC + ӨJC * [(V * I) - (POUT - PIN)] Typical thermal resistance (Өjc) = 29°C/W. Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these (HBM) Class 1A devices. Operating the MAAP-011232 To operate the device, follow these steps: 1. 2. 3. 4. Set VG to -2 V. Turn on VD1 and VD2 to 5-9 V. Adjust VG to set IDQ2 (IDQ1 varies). Turn off in reverse order with VG last. 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Typical Electrical Specifications: Test Board A: 100 - 1600 MHz Input Tuning TA = +25°C, VD1 = VD2 = 9 V, IDQ2 = 200 mA, Z0 = 50 Ω, CW Symbol Frequency F — MHz 100 700 1100 1600 Small-Signal Gain SSG -10 dBm input drive level dB 16 26 25 21 Output Power at 1dB compression P-1dB 1 dB Gain compression dBm 29 29 30 29 Saturated Output Power PSAT 3 dB Gain compression dBm 30 30 30.5 30 Power Added Efficiency PAE 3 dB Gain compression % 32 40 45 37 Reverse Isolation S12 -10 dBm input drive level dB 79 56 55 53 Input Return Loss IRL -10 dBm input drive level dB 4 17 28 7 Output Return Loss ORL -10 dBm input drive level dB 17 16 15 14 Output Third Order Intercept OIP3 -13 dBm/tone, F1-F2 = 6 MHz dBm 41 44 43 40 Gate Bias Voltage VG — V -0.55 Quiescent Drain Current IDQ1 — mA 65 Schematic of the Test Board Type A: 100-1600 MHz Input Tuning VG VD1 C4 VD2 L2 RF IN L1 C1 C5 4 3 2 Pin 1 5 16 6 15 7 14 8 13 9 L3 C2 RF OUT C3 10 11 12 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Test Board Type A: 100 - 1600 MHz Input Tuning PCB Material: R4003C LoPro, 0.008” THICK, Solid Copper filled vias Parts List C1 Capacitor 0.6 pF 0402 Murata C2, C4 Capacitor 0.1 µF 0402 Murata C3 Capacitor 100 pF 0402 Murata C5 Capacitor 10 nF 0402 Murata L1 Inductor 7.5 nH 0402 0402CS, Coilcraft L2 Inductor 560 nH 0402 0402AF, Coilcraft L3 Inductor 110 nH 0603 0603HP, Coilcraft J1, J2 SMA Connector — — 142-0701-881 Emerson 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Test Board Type A: S-parameters over Temperature Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW Insertion Gain vs. Frequency Isolation vs. Frequency 30 -20 +25°C -40°C +85°C 25 20 -40 S12 (dB) S21 (dB) +25°C -40°C +85°C -30 15 -50 10 -60 5 -70 0 0.0 0.5 1.0 1.5 2.0 2.5 -80 3.0 0.0 0.5 Frequency (GHz) 2.0 2.5 3.0 Output Return Loss vs. Frequency 0 0 -5 -5 -10 -10 S22 (dB) S11 (dB) 1.5 Frequency (GHz) Input Return Loss vs. Frequency -15 +25°C -40°C +85°C -20 -15 +25°C -40°C +85°C -20 -25 -25 -30 1.0 -30 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Test Board Type A - Power Performance @ Room Temperature Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW POUT, Gain and Efficiency vs. PIN @ 700 MHz Bias Current vs. PIN @ 700 MHz 250 50 200 Pout Gain Efficiency 40 ID1 & ID2 (mA) Pout & Gain (dBm), Efficiency (%) 60 30 20 150 ID1 ID2 100 50 10 0 -15 -10 -5 0 5 10 0 -15 15 -10 60 5 10 15 10 15 10 15 250 50 200 Pout Gain Efficiency 40 ID1 & ID2 (mA) Pout & Gain (dBm), Efficiency (%) 0 Bias Current vs. PIN @ 1100 MHz Pout, Gain and Efficiency vs. PIN @ 1100 MHz 30 20 150 ID1 ID2 100 50 10 0 -15 -10 -5 0 5 10 0 -15 15 -10 Input Power (dBm) -5 0 5 Input Power (dBm) Pout, Gain and Efficiency vs. PIN @ 1600 MHz Bias Current vs. PIN @ 1600 MHz 60 250 50 200 Pout Gain Efficiency 40 ID1 & ID2 (mA) Pout & Gain (dBm), Efficiency (%) -5 Input Power (dBm) Input Power (dBm) 30 20 150 ID1 ID2 100 50 10 0 -15 -10 -5 0 5 Input Power (dBm) 10 15 0 -15 -10 -5 0 5 Input Power (dBm) 7 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Test Board Type A - Power Performance over Temperature Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW P1dB vs. Frequency Saturated Power vs. Frequency 35 35 +25°C -40°C +85°C +25°C -40°C +85°C 33 P1dB (dBm) PSAT (dBm) 33 31 29 31 29 27 27 25 0.0 0.5 1.0 1.5 25 0.0 2.0 0.5 50 40 40 OIP3 (dBm) PAE (%) 50 30 20 +25°C -40°C +85°C 10 0.5 1.5 2.0 Output IP3 vs. Frequency PAE vs. Frequency 0 0.0 1.0 Frequency (GHz) Frequency (GHz) 1.0 1.5 30 20 +25°C -40°C +85°C 10 2.0 Frequency (GHz) 0 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) PIN = -13 dBm/tone, tone separation = 6 MHz Gain Control Range vs. Frequency Gain Control Range (dB) 50 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) Measured for VG between -0.4 V and -1.4 V 8 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Typical Electrical Specifications: Test Board B: 1600 - 3000 MHz Input Tuning TA = +25°C, VD1 = VD2 = 9 V, IDQ2 = 200 mA, Z0 = 50 Ω, CW Symbol Frequency F — MHz 2000 2500 3000 Small-Signal Gain SSG -10 dBm input drive level dB 24 24 17 Output Power @ 1dB compression P-1dB 1 dB Gain compression dBm 29 29 30 Saturated Output Power PSAT 3 dB Gain compression dBm 30 30 30.5 Power Added Efficiency PAE 3 dB Gain compression % 37 40.5 37 Reverse Isolation S12 -10 dBm input drive level dB 51 52 54 Input Return Loss IRL -10 dBm input drive level dB 9 11 2 Output Return Loss ORL -10 dBm input drive level dB 10 9 9 Output Third Order Intercept OIP3 -13 dBm/tone, F1-F2 = 6 MHz dBm 40 42 40 Gate Bias Voltage VG — V -0.55 Quiescent Drain Current IDQ1 — mA 65 Schematic of the Test Board Type B: 1600-3000 MHz Input Tuning VG VD1 C7 C6 VD2 C5 L4 4 3 2 Pin 1 C8 C2 RF IN L1 C1 L2 L3 5 16 6 15 7 14 8 13 9 L5 C4 RF OUT C3 10 11 12 9 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Test Board Type B: 1600 - 3000 MHz Input Tuning PCB Material: R4003C LoPro, 0.008” THICK, Solid Copper filled vias Parts List C1 Capacitor 1.2 pF 0402 PPI C4, C5 Capacitor 10 nF 0402 Murata C2, C6 Capacitor 0.1 µF 0402 Murata C3 Capacitor 100 pF 0402 Murata L1 Inductor 5.6 nH 0402 0402HP, Coilcraft L2 Inductor 560 nH 0402 0402AF, Coilcraft L3 Inductor 110 nH 0603 0603HP, Coilcraft L4 Inductor 10 nH 0402 0402HP, Coilcraft L5 Inductor 3.3 nH 0402 0402HP, Coilcraft J1, J2 SMA Connector — — 142-0701-881 Emerson 10 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Test Board Type B: S-parameters over Temperature Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW Insertion Gain vs. Frequency Isolation vs. Frequency -20 30 +25°C -40°C +85°C 25 -40 S12 (dB) 20 S21 (dB) +25°C -40°C +85°C -30 15 -50 10 -60 5 -70 0 0.0 -80 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 0 -5 -5 -10 -10 -15 +25°C -40°C +85°C 2.0 2.5 3.0 -15 +25°C -40°C +85°C -20 -25 -30 1.5 Output Return Loss vs. Frequency 0 S22 (dB) S11 (dB) Input Return Loss vs. Frequency -20 1.0 Frequency (GHz) Frequency (GHz) -25 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 -30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 11 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Test Board Type B - Power Performance @ Room Temperature Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW POUT, Gain and Efficiency vs. PIN @ 2 GHz Bias Current vs. PIN @ 2 GHz 250 50 200 Pout Gain Efficiency 40 ID1 & ID2 (mA) Pout & Gain (dBm), Efficiency (%) 60 30 20 150 ID1 ID2 100 50 10 0 -15 -10 -5 0 5 10 0 -15 15 -10 Input Power (dBm) 5 10 15 10 15 10 15 Bias Current vs. PIN @ 2.5 GHz 250 60 50 200 Pout Gain Efficiency 40 ID1 & ID2 (mA) Pout & Gain (dBm), Efficiency (%) 0 Input Power (dBm) Pout, Gain and Efficiency vs. PIN @ 2.5 GHz 30 20 150 ID1 ID2 100 50 10 0 -15 -10 -5 0 5 10 0 -15 15 -10 -5 0 5 Input Power (dBm) Input Power (dBm) Pout, Gain and Efficiency vs. PIN @ 3 GHz Bias Current vs. PIN @ 3 GHz 60 250 50 200 Pout Gain Efficiency 40 ID1 & ID2 (mA) Pout & Gain (dBm), Efficiency (%) -5 30 20 150 ID1 ID2 100 50 10 0 -15 -10 -5 0 5 Input Power (dBm) 10 15 0 -15 -10 -5 0 5 Input Power (dBm) 12 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Test Board Type B - Power Performance over Temperature Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW P1dB vs. Frequency Saturated Power vs. Frequency 35 35 33 +25°C -40°C +85°C P1dB (dBm) PSAT (dBm) 33 31 29 27 +25°C -40°C +85°C 31 29 27 25 1.0 1.5 2.0 2.5 3.0 25 1.0 3.5 1.5 Frequency (GHz) 50 40 40 OIP3 (dBm) PAE (%) 50 30 20 +25°C -40°C +85°C 10 1.5 2.5 3.0 3.5 Output IP3 vs. Frequency PAE vs. Frequency 0 1.0 2.0 Frequency (GHz) 2.0 2.5 3.0 30 20 +25°C -40°C +85°C 10 3.5 Frequency (GHz) 0 1.0 1.5 2.0 2.5 3.0 3.5 Frequency (GHz) PIN = -13 dBm/tone, tone separation = 6 MHz Gain Control Range vs. Frequency Gain Control Range (dB) 50 40 30 20 10 0 1.0 1.5 2.0 2.5 3.0 3.5 Frequency (GHz) Measured for VG between -0.4 V and -1.4 V 13 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Recommended Landing Pattern 9,10 9. All dimensions are in inches. 10. Landing pattern indicates solder mask opening. Cu-filled via-holes under the ground are used for optimal thermal performance. Recommended pattern: 8-mil diameter, 8-mil spacing. Lead-Free 3 mm 16-Lead PQFN† All dimensions shown as inches/mm † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 14 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 15 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0011105