MADL-011008-14120T

MADL-011008 PIN Diode Limiter 50 MHz - 4 GHz Rev. V2 Features       Functional Schematic Low Insertion Loss and Noise Figure +40 dBm Peak and +30 dBm CW Power +10 dBm P1dB Compression Point +16 dBm Flat Leakage Lead-Free 1.2 x 1.5 mm 6-Lead PQFN Package RoHS Compliant* and 260°C Reflow Compatible N/C Description The MADL-011008 is a silicon PIN limiter with small I-region length specifically designed for medium signal applications. The limiter is available in a lead-free 1.2 x 1.5 mm 6-lead PQFN package. The limiter is ideally designed to provide low insertion loss, at zero bias, as well as low flat leakage power with fast signal response/recovery times. The MADL-011008 PIN limiter is designed for use in passive limiter control circuits to protect sensitive receiver components such as low noise amplifiers (LNA), detectors, and mixers. MADL-011008-141200 Bulk Packaging MADL-011008-14120T Tape and Reel MADL-011008-001SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose pieces. IN N/C N/C Pin No. Pin Name Description 1 N/C No Connection 2 GND RF Ground 3 N/C No Connection 4 N/C No Connection 5 IN RF Input 6 N/C No Connection 73 Pad GND Ordering Information Package GND Pin Configuration 1,2 Part Number N/C 1 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011008 PIN Diode Limiter 50 MHz - 4 GHz Rev. V2 Electrical Specifications: Freq 2.7 to 3.0 GHz, T A = 25°C, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 0 dBm dB — 0.15 — Input Return Loss 0 dBm dB — 20 — Output Return Loss 0 dBm dB — 20 — P1dB — dBm — 10 — Peak Incident Power Pulse Width 1 µSec, Duty Cycle 0.1% dBm — 40 — CW Incident Power — dBm — 30 — CW Flat Leakage Incident Power = +24 dBm dBm — 16 — Recovery Time To within 1 dB of final insertion loss Peak Incident Power = +30 dBm Pulse Width 1 µSec, Duty Cycle 0.1% ns — 50 — Spike Leakage +30 dBm Pin, Pulse Width 1 µSec, Duty Cycle 0.1% erg — 0.5 — IP3 Pin -5 dBm/tone, 10 MHz Spacing dBm — 30 — IP2 Pin -5 dBm/tone dBm — 43 — Forward Voltage Forward current = 10 mA V — 0.9 1.1 Reverse Current Reverse voltage = 20 volts µA — 0.1 100 Absolute Maximum Ratings4,5 Application Schematic Parameter Absolute Maximum Peak Incident Power Pulse Width 1 µSec, Duty Cycle 0.1% 43 dBm CW Incident Power 33 dBm Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C C1 C2 RF IN 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. RF OUT 1 L1 Recommended Board Layout Ground Parts List Component Value Package C1 - C2 68 pF 0402 L1 5.1 nH 0402 C1 L1 Ground C2 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011008 PIN Diode Limiter 50 MHz - 4 GHz Rev. V2 Typical Performance Curves Insertion Loss Pin vs. Pout @ 2.85 GHz 0.0 20 -0.1 15 -0.2 10 +25°C -40°C +85°C -0.3 -0.4 2.70 2.75 +25°C -40°C +85°C 5 2.80 2.85 2.90 2.95 3.00 0 0 5 10 15 20 25 30 2.95 3.00 Input Power (dBm) Frequency (GHz) Output Return Loss Input Return loss -10 -10 +25°C -40°C +85°C -15 -20 -20 -25 -25 -30 2.70 2.75 +25°C -40°C +85°C -15 2.80 2.85 2.90 Frequency (GHz) 2.95 3.00 -30 2.70 2.75 2.80 2.85 2.90 Frequency (GHz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011008 PIN Diode Limiter 50 MHz - 4 GHz Lead-Free 1.2 x 1.5 mm 6-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Rev. V2 MADL-011008 PIN Diode Limiter 50 MHz - 4 GHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support