MADR-009269-0001TR

MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 Features          Functional Schematic High Voltage CMOS Technology Complementary Outputs Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Plastic SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant VCC Logic C VOPT TTL Buffer Level Shifter VOPT VEE Description Inverter The MADR-009269 is a single channel CMOS driver used to translate TTL control inputs into complementary gate control voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. The output HIGH level is optionally 0 to 2 V (relative to GND) to optimize the intermodulation products of FET control devices at low frequencies. For driving PIN diode circuits, the outputs are nominally switched between +5 V & -5 V. Output A Level Shifter Output B VEE Pin Configuration2 Pin No. Function 1 Output A 2 GND 3 VCC 4 C, Logic 5 VEE 6 VOPT 7 GND 8 Output B 1 Ordering Information Part Number Package MADR-009269-000100 bulk packaging MADR-009269-00GDIE 100 piece gel pack MADR-009269-000DIE 100 piece waffle pack MADR-009269-0001TR 1000 piece reel 2. The bottom of the die should be isolated for part number MADR-009269-000DIE and MADR-009269-00GDIE. 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 DC Characteristics over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min. Typ. Max. VIH Input High Voltage Guaranteed High Input Voltage V 2.0 — — VIL Input Low Voltage Guaranteed Low Input Voltage V — — 0.8 VOH Output High Voltage IOH = -1 mA V VOPT -0.1 — — VOL Output Low Voltage IOL = +1 mA V — — VEE +0.1 IIN Input Leakage Current µA -1 — 1 RNFET Output Resistance NFET On (to VEE) Ω — 30 — RPFET Output Resistance PFET On (to VOPT) Ω — 30 — ICC Quiescent Supply Current µA — 1 — D ICC Additional Supply Current (per TTL Input pin) mA — 1 — IEE Quiescent Supply Current µA — 1 — IOPT Quiescent Supply Current µA — 1 — VIN = VCC or GND, VEE = min, VCC = max, VOPT = min or max VCC = 5.0 V, VEE = -5.0 V, VOPT = 5.0 V, VOUT = -4.9 V +25°C VCC = 5.0 V, VEE = -5.0 V, VOPT = 5.0 V, VOUT = 4.9 V +25°C VIN = VCC or GND, VEE = -10.5 V, VCC = 5.5 V, VOPT = 5.5 V, No Output Load VCC= max, VIN = VCC -2.1 V VIN = VCC or GND, VEE = -10.5 V, VCC = 5.5 V, VOPT = 5.5 V, No Output Load VIN = VCC or GND, VEE = -10.5 V, VCC = 5.5 V, VOPT = 5.5 V, No Output Load AC Characteristics Over Guaranteed Operating Range3 Symbol Parameter Unit TPLH Propagation Delay TPHL Typical performance -40°C +25°C +85°C ns 20 22 25 Propagation Delay ns 20 22 25 TTLH Output Transition Time (Rising Edge) ns 5 5 8 TTHL Output Transition Time (Falling Edge) ns 4 4 5 Tskew Delay Skew ns 2.5 2.5 2.5 PRF (max) 50% Duty Cycle MHz DC — 10 CIN Input Capacitance pF 5 5 5 3. VCC = +4.5 V, VEE = -4.5 V, VOPT = 0 V or +4.5 V, CL = 25 pF, TRISE, TFALL = 6 ns 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 Handling Procedures Truth Table Input Please observe the following precautions to avoid damage: Outputs C A B Logic “0” VEE VOPT Logic “1” VOPT VEE Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Guaranteed Operating Ranges4,5,6 Symbol Parameter Unit Min. Typ. Max. VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -10.5 -5.0 -4.5 VOPT7,8 Optional DC Output Supply Voltage V 0 — VCC VOPT - VEE Negative Supply Voltage Range V 4.5 Note 7,8 16.0 VCC - VEE Positive to negative Supply Range V 9 10 16 TOPER Operating Temperature °C -40 +25 +85 IOH DC Output Current - High mA -50 — — IOL DC Output Current - Low mA — — 50 TRISE, TFALL Maximum Input Rise or Fall Time ns — — 500 4. 5. 6. 7. Unused logic inputs must be tied to either GND or VCC. MACOM recommends that VCC be powered on before VEE, and powered off after VEE. 0.01 µF decoupling capacitors are required on the power supply lines. VOPT is grounded in most cases when FETs are driven. To improve the intermodulation performance and the 1 dB compression point of GaAs control devices at low frequencies, VOPT can be increased to between 1 and 2 V. The nonlinear characteristics of the GaAs control devices will approximate performance at 500 MHz. It should be noted that the control current that is on the GaAs MMICs will increase when positive controls are applied. 8. When this driver is used to drive PIN diodes, VOPT is often set to +5 V, with VEE set to -5 V. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 Absolute Maximum Ratings9 Symbol Parameter Unit Min. Max. VCC Positive DC Supply Voltage V -0.5 7.0 ICC Positive DC Supply Current (-0.5 V ≤ VIN ≤ 0.8 V; 2.0 V ≤ VIN ≤ VCC + 0.5 V; VCC - VIN ≤ 7.0 V ) mA — 20 VEE Negative DC Supply Voltage V -11.0 0.5 IEE Negative DC Supply Current (per output)10 mA -60 — VOPT Optional DC Output Supply Voltage V -0.5 Note 11 IOPT Optional DC Output Supply Current (per output)10 mA — 60 VOPT - VEE Output to Negative Supply Voltage Range V -0.5 18.0 VCC - VEE Positive to Negative Supply Voltage Range V -0.5 18.0 VIN DC Input Voltage V -0.5 Note 12 VCC +0.5 VO DC Output Voltage V VEE – 0.5 VOPT + 0.5 PD13 Power Dissipation in Still Air mW — 500 TOPER Operating Temperature °C -55 125 TSTG Storage Temperature °C -65 150 ESD ESD Sensitivity kV 2.0 — 9. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures. 10. The maximum IEE and IOPT are specified under the condition of VCC = 5.5 V, VEE = -5.5 V, VOPT = 5.5 V, and the total power dissipation is within 500 mW in still air. 11. The absolute maximum rating for VOPT is VCC +0.5 V, or +7.0 V, whichever is less. 12. If VCC ≥ 6.5 V, then the minimum for VIN is VCC -7.0 V. 13. Derate -7 mW/°C from 65°C to 85°C. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 Switching Waveforms Tf Tr INPUT C VIN 1.3V 1.3V 10% 10% TPLH OUTPUT B LOGIC 0 TPHL TTLH TTHL 90% VOUT OUTPUT A LOGIC 1 90% 90% 50% 10% 90% 50% 10% TSKEW OUTPUT HIGH TSKEW OUTPUT LOW Equivalent Output Circuit for A and B Outputs (50 mA load at 25°C) PFET 30 ohms VOPT An and Bn Outputs VEE NFET 30 ohms 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 Typical Application for a SPDT Switch RF1 RF SECTION VCC +5V C1 .01 µF C3 560 pF VOPT 15 Logic C1 19 20 B1 5 R1 A1 4 R2 RF Common MADR-009269000100 1 13 VEE -5V C2 .01 µF Rc C4 560 pF GND RF2 Description of Circuit The MADR-009269 provides a pair of complementary outputs that are each capable of driving a maximum of ±50 mA into a load. In addition, with proper capacitor selection (C3 & C4) used in parallel with the current setting resistor (R1 & R2), additional spiking current can be achieved. To achieve the non-inverting and inverting complementary voltages, each output is switched between two internal FETs. The FETs are connected to VOPT for the positive output and VEE for the negative output. VOPT and VEE are adjustable for various configurations and have the following limitations: V EE can be no more negative than -10.5 volts; VOPT can be no more positive than +5.5 volts and VOPT must always be less than or equal to VCC. Increasing VOPT beyond VCC will prevent the device from switching states when commanded to by the logic input. The most common configuration is to drive VEE at -5.0 volts with VCC and VOPT tied together at +5.0 volts. 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 Lead-Free, SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. Plating is 100% matte tin over copper. 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 Pad Configuration14,15 Die Size: 1130 x 1290 µm (nominal) Die Outline 9 8 1 2 3 7 4 0 6 5 Pad No. X (µm) nominal Y (µm) nominal Pad Size (µm) XxY 0 0 0 Lower left edge of die 1 266.40 1092.35 94 x 132 2 157.50 903.70 85 x 85 3 200.40 663.65 85 x 85 4 365.30 200.45 85 x 85 5 684.35 157.50 85 x 85 6 972.50 230.50 85 x 85 7 972.50 451.45 85 x 85 8 863.60 1092.35 94 x 132 9 1130 1290 Upper right edge of die 14. All X,Y dimensions are at bond pad center. 15. Die thickness is 8.0 mils. 8 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADR-009269 Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 9 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support