MADRCC0006

MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 Functional Schematic Features          High Speed CMOS Technology Single Channel Positive Voltage Control Low Power Dissipation Low Cost Plastic SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible MADRCC0006 is RoHS* Compliant Version of SWD-109 VCC Logic, C1 VOPT TTL Buffer Level Shifter VOPT VEE Description Inverter The MADRCC0006 is a single channel driver used to translate TTL control inputs into gate control voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. The output high level is optionally 0 to +2 V (relative to GND) to optimize the intermodulation products of the control devices at low frequencies. Output A Level Shifter Output B VEE Pin Configuration3 1 Ordering Information Pin No. Function 1 Output A 2 GND 3 VCC 4 C1, Logic Part Number Package 5 VEE MADRCC0006 SOIC-8 6 VOPT MADRCC0006TR 1000 piece reel, SOIC-8 7 GND MADR-0009151-000DIE Die2 8 Output B 1. Reference Application Note M513 for reel size information. 2. Die sales are available in waffle packs in increments of 100 pieces. 3. The bottom of the die should be isolated for part number MADR-009151-000DIE. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 Guaranteed Operating Ranges Symbol Parameter4 Unit Min. Typ. Max. VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -8.5 -5.0 -4.5 VOPT5 Optional DC Output Supply Voltage V 0 1.0 2.0 VOPT-VEE Negative Supply Voltage Range V 4.5 6.5 11.0 VCC-VEE Positive to negative Supply Range V 9.0 10.0 14.0 TA Operating Ambient temperature °C -40 +25 +85 IOH DC Output Current - High mA — — -1.0 IOL DC Output Current - Low mA — — 1.0 TRISE, TFALL Maximum Input Rise or Fall Time ns — — 500 4. All voltages are relative to GND. 5. VOPT is grounded for most applications. To improve the intermodulation performance and the 1 dB compression point of GaAs control devices at low frequencies, VOPT can be increased to between 1 and 2 V. The nonlinear characteristics of the GaAs control devices will approximate performance at 500 MHz. It should be noted that the control current is on the GaAs MMICs will increase when positive controls are applied. 6. MACOM recommends that VCC be powered on before VEE and powered off after VEE. DC Characteristics over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min. Typ. Max. VIH Input High Voltage Guaranteed High Input Voltage V 2.0 — — VIL Input Low Voltage Guaranteed Low Input Voltage V — — 0.8 VOH Output High Voltage IOH = -1 mA VEE = max. V VOPT -0.1 — — VOL Output Low Voltage IOL = 1 mA VEE = max. V — — VEE +0.1 IIN Input Leakage Current VIN = VCC or GND VEE = min. µA — .01 10 ICC Quiescent Supply Current µA — — 100 D ICC Additional Supply Current, per TTL Input pin mA — — 1.0 VCC = max. VEE = min. VOPT = min. or max. VIN = VCC or GND VCC= max. VIN = VCC -2.1 V 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 AC Characteristics Over Guaranteed Operating Range7 Symbol Parameter Unit -55 to +25°C