MADRCC0007

MADRCC0007 Quad Driver for GaAs FET Switches and Attenuators Rev. V3 Features          High Speed CMOS Technology Quad Channel Positive Voltage Control Low Power Dissipation Low Cost Plastic SOIC-16 Package 100% Matte Tin Plating over Copper Halogen-Free ―Green‖ Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SWD-119 Functional Schematic Vcc Logic C1 Vopt TTL Buffer Level Shifter Output A1 Vopt Driver 1 Vee Inverter Output B1 Level Shifter Description The MADRCC0007 is a quad channel driver used to translate TTL control inputs into gate control voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. The output HIGH level is optionally 0 to +2.0V (relative to GND) to optimize the intermodulation products of the control devices at low frequencies. Vee Output A2 Same as Driver 1 Logic C2 Output B2 Output A3 Same as Driver 1 Logic C3 Output B3 Output A4 Same as Driver 1 Logic C4 Output B4 Pin Configuration Pin No. Function Pin No. Function 1 Vee 9 Output A1 2 Vcc 10 Output B1 3 C4 11 Output A2 4 C3 12 Output B2 5 C2 13 Output A3 6 C1 14 Output B3 7 Vopt 15 Output A4 8 Ground 16 Output B4 Ordering Information Part Number Package MADRCC0007 PIN Bulk Packaging MADRCC0007TR 1000 piece reel Note: Reference Application Note M513 for reel size information. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0007 Quad Driver for GaAs FET Switches and Attenuators Rev. V3 Guaranteed Operating Ranges Symbol Parameter 1 Unit Min. Typ. Max. VCC Positive DC Supply Voltage V 4.5 5.0 5.5 Negative DC Supply Voltage V -8.5 -5.0 -4.5 Optional DC Output Supply Voltage V 0 1.0 2.0 VOPT-VEE Negative Supply Voltage Range V 4.5 6.5 8.5 VCC-VEE Positive to negative Supply Range V 9.0 10.0 14.0 TA Operating Ambient temperature °C -40 +25 +85 IOH DC Output Current - High mA — — -1.0 IOL DC Output Current - Low mA — — 1.0 Trise, Tfall Maximum Input Rise or Fall Time nS — — 500 VEE VOPT 2 1. All voltages are relative to GND. 2. VOPT is grounded for most applications. To improve the intermodulation performance and the 1 dB compression point of GaAs control devices at low frequencies, VOPT can be increased to between 1.0 and 2.0V. The nonlinear characteristics of the GaAs control devices will approximate performance at 500 MHz. It should be noted that the control current that is on the GaAs MMICs will increase when positive controls are applied. DC Characteristics over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min. Typ. Max. VIH Input High Voltage Guaranteed High Input Voltage V 2.0 — — VIL Input Low Voltage Guaranteed Low Input Voltage V — — 0.8 VIH Output High Voltage IOH = -1 mA VEE = Max V VOPT -0.1 — — VOL Output Low Voltage IOL = 1 mA VEE = Max V — — VEE +0.1 IIN Input Leakage Current VIN = VCC or GND VEE = Min µA -1.0 0 1.0 ICC Quiescent Supply Current VCC = Max VOPT = Min or Max VEE = Min VIN = VCC or GND µA — 250 400  ICC Additional Supply Current, per TTL Input pin VCC= Max VIN = VCC -2.1V mA — — 1.0 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Truth Table Input Outputs CX A B Logic ―0‖ VEE VOPT Logic ―1‖ VOPT VEE 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0007 Quad Driver for GaAs FET Switches and Attenuators Rev. V3 AC Characteristics Over Guaranteed Operating Range 3 Symbol Parameter -55 to +25°C