MAPD-011007

MAPD-011007 2 Way 0⁰ Power Divider 5 - 2150 MHz Rev. V5 Features • • • • • Functional Schematic 2 way 0 Degree Surface Mount Available on Tape and Reel 260°C Reflow Compatible RoHS* Compliant and Pb free Description The MAPD-011007 is a 2 way 0 degree power divider in a surface mount package. Ideally suited for all CATV Broadband and FTTx applications. Pin Configuration3 1 Ground 2 External 0.5 pF Capacitor 3 Output 2 4 Output 1 5 External 0.5 pF Capacitor 6 Input 3. MACOM recommends connecting unused package pins to ground. Absolute Maximum Ratings4,5 Ordering Information1,2 Part Number Package Parameter Absolute Maximum MAPD-011007 bulk Input RF Power6 0.5 W MAPD-011007-TB Sample Board DC Current 500 mA Operating Temperature -40°C to +85°C 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Specified at +25°C only. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0001199 MAPD-011007 2 Way 0⁰ Power Divider 5 - 2150 MHz Rev. V5 Electrical Specifications: Freq. = 5 - 3250 MHz, TA = 25°C, Z0 = 75 Ω, PIN = 0 dBm Impedance — Ω — 75 — Power Split — dB — 3 — 0.3 0.5 0.6 1.0 0.6 0.8 1.0 1.5 0.3 0.3 0.3 0.5 0.8 1.0 0.2 39 22 18 28 18 14 40 22 18 30 42 34 31 31 24 0.7 1.0 1.2 2.0 1.0 1.2 1.6 3.2 0.5 0.5 0.5 1.5 4.0 6.0 7.0 Insertion Loss (pin 6 - pin 4) Insertion Loss (pin 6 - pin 3) Amplitude Balance Phase Balance Input Return Loss (pin 6) Output Return Loss (pin 3) Output Return Loss (pin 4) Isolation (pin 4 - pin 3) 5 - 1002 MHz 1003 - 1218 MHz 1218 - 1600 MHz 1600 - 2150 MHz 5 - 1002 MHz 1003 - 1218 MHz 1218 - 1600 MHz 1600 - 2150 MHz 5 - 1002 MHz 1003 - 1218 MHz 1218 - 1600 MHz 1600 - 2150 MHz 5 - 1002 MHz 1003 - 1600 MHz 1600 - 2150 MHz 5 - 1002 MHz 1003 - 1600 MHz 1600 - 2150 MHz 5 - 1002 MHz 1003 - 1600 MHz 1600 - 2150 MHz 5 - 1002 MHz 1003 - 1600 MHz 1600 - 2150 MHz 5 - 10 MHz 10 - 65 MHz 66 - 870 MHz 871 - 1002 MHz 1003 - 1600 MHz 1600 - 2150 MHz dB — dB — dB — degree — dB dB dB dB 20 14 11 17 13 9 20 15 12 24 30 26 24 22 15 — — — — 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0001199 MAPD-011007 2 Way 0⁰ Power Divider 5 - 2150 MHz Rev. V5 Typical Performance Curves:7 PIN = 0 dBm, TA = 25°C, Z0 = 75 Ω 7. Temperature plots available on request 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0001199 MAPD-011007 2 Way 0⁰ Power Divider 5 - 2150 MHz Rev. V5 Typical Performance Curves:7 PIN = 0 dBm, TA = 25°C, Z0 = 75 Ω 7. Temperature plots available on request 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0001199 MAPD-011007 2 Way 0⁰ Power Divider 5 - 2150 MHz Recommended PCB Footprint Rev. V5 Outline Drawing8,9,10,11 Application Schematic 8. 9. 10. 11. Carrier Tape Orientation Dimensions in mm. Tolerance: ±0.2mm unless otherwise noted. Model number and lot code printed on reel. Plating finish: ENIG on both sides, 0.05 to 0.1 µm gold over 3 to 6 µm nickel Tape & Reel Information Parameter Units Value Qty per reel - 2000 Reel Size mm 330 Tape Width mm 12.0 Pitch mm 8.0 Orientation - F18 Reference Application Note ANI-019 for orientation 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0001199 MAPD-011007 2 Way 0⁰ Power Divider 5 - 2150 MHz Rev. V5 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0001199