MAPDCT0029

MAPDCT0029 2 Way 0º Power Divider 5-1000MHz Rev. V3 Functional Block Diagram Features      Surface Mount 2 Way 0 degree 260°C Reflow Compatible RoHS* Compliant Available on Tape and Reel. Description M/A-COM’s MAPDCT0029 is 2 way 0 degree RF power divider in a low cost, surface mount package. A 160 Ohm resistor included on the component. Ideally suited for high volume CATV/Broadband applications. Pin Configuration Pin No. Function 1 Ground 2 Not connected (ground) 3 Output 2 4 Output 1 5 Not connected (ground) 6 Input Absolute Maximum Ratings 1,2 Ordering Information Part Number MAPDCT0029TR Parameter Max Input Power 1W DC current 240mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +100°C Package 900 piece reel Absolute Maximum Reference Application Note M513 for reel size information. 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPDCT0029 2 Way 0º Power Divider 5-1000MHz Rev. V3 Electrical Specifications: TA = 25°C, Z0 = 75 1 Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss - 5 - 500 MHz dB - 0.5 0.7 Insertion Loss - 500 - 1000 MHz dB - 0.7 1.4 Amplitude Unbalance (Nominal 0dB) - 5 - 1000 MHz dB - ± 0.28 ± 0.55 Phase Unbalance (Nominal 0º) - 5 - 1000 MHz º - ± 1.0 ± 3.0 Return Loss: Input - 5 - 50 MHz dB 24 35 - Return Loss: Input - 50 - 870 MHz dB 14 26 - Return Loss: Input - 870 - 1000 MHz dB 11 16 - Return Loss: Output - 5 - 1000 MHz dB 15 22.5 - Isolation (between outputs) - 5 - 50 MHz dB 20 26 - Isolation (between outputs) - 50 - 870 MHz dB 14 22 - Isolation (between outputs) - 870 - 1000 MHz dB 12 15 - Case Style: SM-55 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPDCT0029 2 Way 0º Power Divider 5-1000MHz Rev. V3 Typical Performance Curves: TA = 25°C, Z0 = 75 1 Isolation Insertion Loss 0 0.0 -0.1 -5 -0.2 -10 -0.3 -15 dB dB -0.4 -0.5 -20 -0.6 -25 -0.7 -30 -0.8 -35 -0.9 -40 -1.0 5 204 403 602 801 5 1000 204 Amplitude Unbalance 801 1000 Phase Unbalance 1.0 2.0 0.8 1.5 0.6 1.0 degree 0.4 0.2 dB 602 F re que nc y ( M H z) F re que nc y (M H z) 0.0 -0.2 0.5 0.0 -0.5 -0.4 -1.0 -0.6 -1.5 -0.8 -2.0 -1.0 5 204 403 602 801 5 1000 204 403 602 801 1000 801 1000 Frequency (M Hz) Frequency (M Hz) Return Loss: Input Return Loss: Output 0 0 -5 -5 -10 -10 -15 -15 dB dB 403 -20 -20 -25 -25 -30 -30 -35 -35 -40 -40 5 204 403 602 F re que nc y ( M H z) 801 1000 5 204 403 602 F re que nc y ( M H z) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPDCT0029 2 Way 0º Power Divider 5-1000MHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support