MASW-000932-001SMB

HMICTM PIN Diode SPDT 80 W Switch for 0.01 - 6.0 GHz High Power Applications MASW-000932 Rev. V3 Features Functional Diagram (Top View) • • • • Exceptional Broadband Performance Low Loss: TX = 0.25 dB @ 2010 MHz High Isolation: RX = 43 dB @ 2010 MHz Suitable for High Power LTE, TD-SCDMA, WiMAX, and Military Radio Applications • Surface Mount 4 mm PQFN Package • RoHS* Compliant • Class 2 ESD Rating (HBM 2kv) N/C GND TX GND 16 15 14 13 GND 11 12 N/C ANT 2 11 N/C N/C 3 10 N/C N/C 4 9 DC2 Applications • Aerospace & Defense • ISM Description The MASW-000932 is a SPDT high power, broadband, high linearity, PIN diode T/R switch for 0.01 - 6.0 GHz applications, including WiMAX & WiFi. The device is provided in an industry standard lead free 4 mm PQFN plastic package. This device incorporates a PIN diode die fabricated with MACOMs’ patented silicon-glass HMICTM process. This chip features two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage and contamination during handling and assembly. This compact SPDT switch offers wideband performance with excellent isolation to loss ratio for both TX and RX states. The PIN diode provides 45 W CW power handling at an 85°C baseplate temperature and 72 dBm IIP3 at 2010 MHz for maximum switch performance. 5 6 7 8 N/C N/C RX N/C Pin Configuration1 Pin Function 1,13,15 GND 2 ANT 3,4,5,6,8,10,11,12,16 N/C2 7 RX 9 DC2 14 TX 17 Pad 1. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. 2. MACOM recommends connecting all No Connection (N/C) pins to ground. Ordering Information3 MASW-000932-13560T 1000 piece reel MASW-000932-001SMB Sample Board 3. Reference Application Note M513 for reel size information. 1 * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008129 HMICTM PIN Diode SPDT 80 W Switch for 0.01 - 6.0 GHz High Power Applications MASW-000932 Rev. V3 Electrical Specifications4: Freq. = 2.0, 2.7, 3.5 GHz, TA = +25°C, Bias = 100 mA / 28 V Parameter 100 mA / 28 V Conditions Min. Typ. Max. dB — 0.60 0.25 0.72 0.35 0.80 0.45 0.80 — 0.90 — 0.95 — Isolation PIN= 0 dBm RX to Antenna, 2.0 GHz TX to Antenna, 2.0 GHz RX to Antenna, 2.7 GHz TX to Antenna, 2.7 GHz RX to Antenna, 3.5 GHz TX to Antenna, 3.5 GHz dB 40.0 — 39.0 — 34.0 — 43.0 14.0 41.5 12.0 35.0 10.0 — Input Return Loss PIN= 0 dBm RX TX dB — 34 17 — TX Input P0.1dB TX to Antenna dBm — 49 — Harmonic PIN = 30 dBm dBc — 80 — TX 3rd Harmonic PIN = 30 dBm dBc — 95 — TX IIP3 PIN = 10 dBm, F1 = 2010 MHz, F2 = 2020 MHz dBm — 72 — TX CW Input Power 25°C Base plate, 2.01 GHz dBm / W — 49 / 80 — TX CW Input Power 85°C Base plate, 2.01 GHz dBm / W — 46.5 / 45.0 — RX CW Input Power — dBm / W — 41.5 / 14.0 — TX RF Switching Speed (10 - 90% RF Voltage) 1 MHz Rep Rate in Modulating Mode ns — 200 — RX, 2.0 GHz TX, 2.0 GHz RX, 2.7 GHz TX, 2.7 GHz RX, 3.5 GHz TX, 3.5 GHz , Insertion Loss RX PIN= 0 dBm TX 2 nd Units 4. See Bias Table Absolute Maximum Ratings5,6 @ TA = +25°C (unless otherwise specified) Minimum Reverse Bias Voltage9 Parameter Absolute Maximum Frequency (MHz) DC Voltage (V) Forward Current 125 mA 50 10710 DC Reverse Voltage 110 V 500 7210 1000 44 TX Peak Incident Power 80 W (49 dBm)7 @ 2010 MHz >2000 W, 5 µs, 1% duty Cycle8 2000 24 4000 12 Junction Temperature +175°C 6000 8 Operating Temperature -40°C to +85°C Storage Temperature -55°C to +150°C TX Incident CW Power 5. Exceeding these limits may cause permanent damage. 6. MACOM does not recommend sustained operation near these survivability limits. 7. Baseplate temperature must be controlled to a constant +25°C. 8. This rating is guaranteed if the RF ports are terminated. 9. Minimum DC bias voltage to maintain low loss under 80 W of TX power with 1.5:1 VSWR 10. The MADR-009150 driver has a 55 V maimum voltage limit. For higher voltages, consider using the MADR-010574 driver. 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008129 HMICTM PIN Diode SPDT 80 W Switch for 0.01 - 6.0 GHz High Power Applications MASW-000932 Rev. V3 Bias Diagrams & Tables TX-ANT Insertion Loss, RX-ANT Isolation (Pin 16) N/C GND TX (Pin 1) GND RX-ANT Insertion Loss, TX-ANT Isolation (Pin 16) N/C GND 100 mA/ 50mA 20mA N/C GND TX GND + (Pin 1) GND 28 V 20mA / 50mA N/C - ANT 28 V GND + N/C ANT N/C GND GND RX N/C + - N/C DC2 N/C 5V / 25V 100 mA 50 mA N/C N/C - N/C GND GND RX 20mA / 50mA 28 V + DC2 GND Bias Table Bias Table TX RX DC2 ANT Pin Pin 14 Pin 7 Pin 9 Pin 2 TX-ANT Isolation +28 V, 0 mA -100 mA +28 V, 0 mA 0 V, +100 mA TX-ANT Insertion Loss -100 mA +28 V, +50 mA -50 mA 0 V, +100 mA RX-ANT Isolation -100 mA +28 V, +50 mA -50 mA 0 V, +100 mA RX-ANT Insertion Loss +28 V, 0 mA -100 mA +28 V, 0 mA 0 V, +100 mA 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008129 HMICTM PIN Diode SPDT 80 W Switch for 0.01 - 6.0 GHz High Power Applications MASW-000932 Rev. V3 Application Schematic using MADR-009150 Driver11,12,13,14,15,16 ANT C3 R112 L1 5V C4 TX Voltage RX Voltage TX C1 VDD VCC C11 L3 C10 C816 L4 C6 B C1 RX C2 SPDT L2 Logic Input C5 C7 SH Current A MADR-009150 Switch Driver R211 C9 Ground 11. Forward Bias Diode Voltage: DVF is ~0.9 V @ 22 mA; DVF is ~1.0 V @ 35 mA 12. R1 is calculated by (VCC - 1.3 V approximation since Tx and Rx voltages “B” & “A” on the driver will be slightly different)/ISERIES, where ISERIES is the desired bias current for the series diodes. 13. R2 is calculated by (VDD - 1.5 V)/ISHUNT, where ISHUNT is the desired forward bias current for the shunt diode. The power dissipation is calculated by ISHUNT x (VDD - 1.5 V). 14. The current in through the back-biased diodes will be the leakage current for the diodes. 15. C1 - C7, C9 - C11, L1 - L4, R1, R2, and the switch are discrete components that should be installed on the users board. It is recommended that Coilcraft 0603CS-27NXJLW or equivalent be used for L1 - L4 at 2 GHz (values may vary based on the frequency). 16. C8 is already built-in for MASW-000932-13560 switch. Parts List C1 - C3 27 pF C4 1000 pF C5, C10, C11 16 C6, C7, C8 , C9 0.1 µF 50 pF L1, L2, L3, L4 27 nH R1 39 Ω12 R2 see note 13 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008129 HMICTM PIN Diode SPDT 80 W Switch for 0.01 - 6.0 GHz High Power Applications MASW-000932 Rev. V3 Typical Performance Curves, TX (100 mA Bias Current) Isolation, TX Insertion Loss, TX 0 0.0 -5 -0.2 -10 -0.4 -15 -0.6 -20 -0.8 -1.0 -25 0 1 2 3 4 5 -30 0 1 0 0 -5 -5 -10 -10 -15 -15 -20 -20 -25 -25 -30 -30 -35 -35 1 4 5 4 5 Output Return Loss, TX Input Return Loss, TX 0 3 Frequency (GHz) Frequency (GHz) -40 2 2 3 Frequency (GHz) 4 5 -40 0 1 2 3 Frequency (GHz) 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008129 HMICTM PIN Diode SPDT 80 W Switch for 0.01 - 6.0 GHz High Power Applications MASW-000932 Rev. V3 Typical Performance Curves, RX (100 mA Bias Current) Isolation, RX Insertion Loss, RX 0.0 0 -10 -0.2 -20 -0.4 -30 -0.6 -40 -0.8 -1.0 -50 0 1 2 3 4 5 -60 0 1 Frequency (GHz) 0 0 -10 -10 -20 -20 -30 -30 -40 -40 0 1 3 4 5 4 5 Output Return Loss, RX Input Return Loss, RX -50 2 Frequency (GHz) 2 3 Frequency (GHz) 4 5 -50 0 1 2 3 Frequency (GHz) 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008129 HMICTM PIN Diode SPDT 80 W Switch for 0.01 - 6.0 GHz High Power Applications MASW-000932 Rev. V3 Typical Performance Curves14: +85°C base plate temperature, 2000 MHz Power 180 Handling Procedures 160 Please observe the following precautions to avoid damage: Static Sensitivity 140 These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these HBM Class 2 devices. 120 100 80 20 25 30 35 40 45 50 Input Power (dBm) 14. Maximum Junction Temperature for this device is 175°C. Lead Free 4 mm 16-Lead PQFN † † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 7 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008129 HMICTM PIN Diode SPDT 80 W Switch for 0.01 - 6.0 GHz High Power Applications MASW-000932 Rev. V3 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 8 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008129