MASW-000936-001SMB

PIN Diode SPDT 120 W Switch for 0.05 - 6 GHz High Power Applications MASW-000936 Rev. V8 Features • • • • • • • • Functional Diagram (Top View) Exceptional Broadband Performance Low Insertion Loss: TX = 0.20 dB @ 2.7 GHz High Isolation: RX = 50 dB @ 2.7 GHz High TX RF Input Power = 120 W CW @ 2.0 GHz, +85°C High TX RF Input Peak Power: 1000 W Positive DC Bias Only Required Surface Mount 4 mm PQFN Package RoHS* Compliant and 260°C Reflow Compatible N/C N/C TX GND 16 15 14 13 GND 1 12 Tx Tune ANT 2 11 GND N/C 3 10 N/C N/C 4 9 Applications • Suitable for High Power LTE, TD-SCDMA, WiMAX, and Military Radio Applications Description The MASW-000936 is a SPDT high power, broadband, high linearity, PIN diode T/R switch for 0.05 - 6.0 GHz applications, including WiMAX & WiFi. The device is provided in an industry standard lead free 4 mm PQFN plastic package. This device incorporates PIN diode die fabricated with a low loss, high isolation switching diode Ordering Information1 MASW-000936-14000T 1000 piece reel MASW-000936-001SMB Sample Board MASW-000936-DRVSMB Sample Board (with MADR-009150 driver) 1. Reference Application Note M513 for reel size information. 1 5 6 7 8 N/C N/C RX GND ShD RX Bias Pin Configuration2 Pin # Pin Name Description 1,8,11,13 GND Ground 2 ANT Antenna 3,6,15 N/C Connect to Ground 4,5,10,16 N/C No Connection 7 RX Receive 9 ShD RX Bias ShD RX Bias 12 Tx Tune Tx Tune3 14 TX Transmit 2. The exposed pad centered on the package bottom must be connected to RF, DC and Thermal ground. 3. Optional tuning pin. See note 6 for details. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008140 PIN Diode SPDT 120 W Switch for 0.05 - 6 GHz High Power Applications MASW-000936 Rev. V8 Electrical Specifications4: Freq. = 2.0, 2.7, 3.5 GHz, TA = 25°C, Bias = 100 mA / 28 V Parameter Test Conditions Insertion Loss4 PIN = 0 dBm RX, 0.8 GHz TX, 0.8 GHz RX, 2.0 GHz TX, 2.0 GHz RX, 2.7 GHz TX, 2.7 GHz RX, 3.5 GHz TX, 3.5 GHz Units Min. Typ. Max. dB — 0.20 0.07 0.35 0.15 0.50 0.20 0.70 0.25 — — 0.55 — 0.75 — 0.90 — Isolation4 PIN = 0 dBm RX to Antenna, 2.0 GHz TX to Antenna, 2.0 GHz RX to Antenna, 2.7 GHz TX to Antenna, 2.7 GHz RX to Antenna, 3.5 GHz TX to Antenna, 3.5 GHz dB 41 — 40 — 33 — 45 16 50 13 40 11 — Input Return Loss4 PIN = 0 dBm RX TX dB — 23 34 — TX Input P0.1 dB TX to Antenna dBm — >50 — TX IIP3 PIN = 30 dBm F1 = 2010 MHz, F2 = 2020 MHz dBm — 72 — TX CW Input Power 85°C Base plate 2.0 GHz 2.7 GHz 3.5 GHz RX CW Input Power 85°C Base plate 2.0 GHz dBm W — 41.5 14 — TX RF Switching Speed (10 - 90% RF Voltage) 1 MHz Rep Rate in Modulating Mode ns — 200 — dBm / W — 50.8 / 120 50 / 100 49 / 80 — 4. See Bias Table 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008140 PIN Diode SPDT 120 W Switch for 0.05 - 6 GHz High Power Applications MASW-000936 Rev. V8 Bias Schematic ANT J1 RX Bias +5 V C4 C1 C7 L1 L3 RX J3 Pin Diode 2 C3 Antenna Bias R1 Pin Diode 1 Pin Diode 3 TX J2 C2 L2 C5 L4 ShD RX Bias R2 C6 Parts List6 Suggested Switch Driver MADR-009150 or MADR-010574 C1 - C3 22 pF 0603 C4 - C7 27 pF 0603 L1 - L4 68 nH 0603 39 Ω 0603 480 Ω See note 5 R1 5 R25 TX Bias 5. R1 and R2 values equal to ((Applied Bias Voltage) - (Forward Voltage of Diode)) / (Ibias) where the Forward Voltage of Diode (Vf) can be approximated as 1 V. The size of the package will depend on the power rating needed. 6. Not shown, adding an LC network to pin 12 can improve RX performance between 2.0 and 2.7 GHz but may limit performance above 3.0 GHz. For broadband applications MACOM recommends not using pin 12 and not connecting it to any metal trace. Bias Table Switch State TX Bias RX Bias ShD RX Bias ANT Bias TX-ANT Isolation (+28 V), 0 mA (GND), -100 mA (+28 V), 0 mA +5 V TX-ANT Insertion Loss (GND), -100 mA (+28 V), +56 mA (GND), -56 mA +5 V RX-ANT Isolation (GND), -100 mA (+28 V), +56 mA (GND), -56 mA +5 V RX-ANT Insertion Loss (+28 V), 0 mA (GND), -100 mA (+28 V), 0 mA +5 V 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008140 PIN Diode SPDT 120 W Switch for 0.05 - 6 GHz High Power Applications MASW-000936 Rev. V8 Absolute Maximum Ratings7,8,9 @ TA = +25°C (unless otherwise specified) TX Input Power De-rating @ 20 dB I/O Return Loss Absolute Maximum 220 Forward Current 150 mA 200 DC Reverse Voltage 130 V TX Incident CW Power See Power De-rating Curve TX Incident Peak Power (10 µs Pulse Width10 ) 1000 W RX Incident CW Power 41.5 dBm (14 W) @ 2 GHz, +85°C Junction Temperature +175°C Operating Temperature -40°C to +100°C Storage Temperature -55°C to +150°C 7. 8. Exceeding these limits may cause permanent damage. MACOM does not recommend sustained operation near these survivability limits. 9. Operating at nominal conditions with TJ ≤ +175°C will ensure MTTF > 1 x 106 hours. 10. Measured with 4 ms pulse period, up to +100°C case temperature. Minimum Reverse Bias Voltage11 Frequency (MHz) DC Voltage (V) 50 13012 500 9112 1000 5712 2000 31 4000 16 6000 11 Maximum CW Input Power (W) Parameter 180 2.0 GHz 2.7 GHz 3.5 GHz 160 140 120 100 80 60 40 20 0 0 25 50 75 100 125 150 175 Temperature @ Bottom of Package (°C) Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these Class 1C Human Body devices. 11. Minimum DC bias voltage to maintain low loss under 120 W of Tx power with 1.5:1 VSWR 12. The MADR-009150 switch driver has a maximum output voltage of 55 V. If a higher output voltage is desired, then one may want to consider using the MADR-010574 switch driver. 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008140 PIN Diode SPDT 120 W Switch for 0.05 - 6 GHz High Power Applications MASW-000936 Rev. V8 Typical Performance Curves (RF-probed parts), TX (100 mA Bias Current) Isolation, TX Insertion Loss, TX 0.0 0 -0.1 -10 -0.2 -20 -0.3 -30 -0.4 -40 -0.5 0 1 2 3 4 5 6 -50 0 1 2 Frequency (GHz) 0 0 -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 0 1 4 5 6 5 6 Output Return Loss, TX Input Return Loss, TX -60 3 Frequency (GHz) 2 3 4 Frequency (GHz) 5 6 -60 0 1 2 3 4 Frequency (GHz) 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008140 PIN Diode SPDT 120 W Switch for 0.05 - 6 GHz High Power Applications MASW-000936 Rev. V8 Typical Performance Curves (RF-probed parts), RX (100 mA Bias Current) Isolation, RX Insertion Loss, RX 0.0 0 -0.2 -10 -0.4 -20 -0.6 -30 -0.8 -40 -1.0 -50 -1.2 -1.4 0 1 2 3 4 5 6 -60 0 1 2 0 0 -10 -10 -20 -20 -30 -30 1 5 6 5 6 Output Return Loss, RX Input Return Loss, RX 0 4 Frequency (GHz) Frequency (GHz) -40 3 2 3 4 Frequency (GHz) 5 6 -40 0 1 2 3 4 Frequency (GHz) 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008140 PIN Diode SPDT 120 W Switch for 0.05 - 6 GHz High Power Applications MASW-000936 Rev. V8 PCB Footprint Lead Free 4 mm 16-Lead PQFN† † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level (MSL) 1 requirements. Plating is NiPdAuAg. 7 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008140 PIN Diode SPDT 120 W Switch for 0.05 - 6 GHz High Power Applications MASW-000936 Rev. V8 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 8 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008140