MASW-007107-000SMB

GaAs Broadband SPDT Switch DC - 8 GHz MASW-007107 Rev. V8 Features Functional Schematic • 802.11a + b/g and MIMO Applications • Test and Measurement and Low/Medium Power Telecommunication Applications up to 8 GHz • Broadband Performance: DC - 8 GHz • Low Insertion Loss: 0.5 dB from 2 - 6 GHz • High Isolation: 30 dB from 2 - 6 GHz • Positive or Negative Control • Fast Settling for Low Gate Lag Requirements • Lead-Free 2 mm 8-Lead PDFN Package • RoHS* Compliant Applications RF1 1 8 VC1 N/C 2 7 RFC N/C 3 6 N/C RF2 4 5 VC2 • Aerospace & Defense • ISM Description The MASW-007107 is a broadband GaAs pHEMT MMIC SPDT switch in a lead-free 2 mm 8-lead PDFN package. Typical applications are for WLAN IEEE 802.11a + b/g, and MIMO. Other applications include test equipment requiring ultra fast switching speeds. Designed for low insertion loss, this SPDT switch maintains low loss up to 8 GHz. The MASW-007107 is fabricated using a 0.5 micron gate length GaAs pHEMT process. This process features full passivation for performance and reliability. Pin Configuration4 Pin No. Pin Name Description 1 RF1 RF Output 1 2, 3, 6 N/C No Connection 4 RF2 RF Output 2 5 VC2 Voltage Control 2 7 RFC RF Common 8 VC1 Voltage Control 1 9 Paddle5 RF and DC Ground 4. MACOM recommends connecting unused package pins to ground. 5. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. Ordering Information1,2 Part Number Package MASW-007107-TR3000 3000 piece reel MASW-007107-000SMB Sample Test Board MASW-007107-000DIE3 Separated die on grip ring MASW-007107-0GPDIE 100 piece gel pack 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. Die quantity varies. 1 * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008121 GaAs Broadband SPDT Switch DC - 8 GHz MASW-007107 Rev. V8 Electrical Specifications: T A = +25°C, VC = 0 V / 3 V, Z0 = 50 Ω, 8 pF Capacitor6,7 Parameter Test Conditions Insertion Loss8 2.0 - 6.0 GHz 6.0 - 8.0 GHz Isolation Min. Typ. Max. dB — 0.50 0.75 0.8 — 2.4 GHz 5.3 GHz 5.8 GHz 6.0 - 8.0 GHz dB 24 28 25 — 29 33 30 20 — Return Loss DC - 8.0 GHz dB — 16 — Input IP2 Two Tone, 5 dBm / Tone, 5 MHz Spacing 2.4 GHz 5.3 GHz 5.8 GHz dBm — 92 83 85 — Two Tone, 5 dBm / Tone, 10 MHz Spacing 2.4 GHz (3 V) 5.8 GHz (3 V) Units dBm 2.4 GHz (5 V) 5.8 GHz (5 V) Input IP3 Two Tone, 15 dBm / Tone, 10 MHz Spacing 2.4 GHz (3 V) 5.8 GHz (3 V) — dBm 2.4 GHz (5 V) 5.8 GHz (5 V) 2 — — — 54 49 — 55 51 — 57 54 — 59 58 — Input P0.1dB 2.4 GHz 5.3 GHz 5.8 GHz dBm — 26 26 25 — Input P1dB 2.4 GHz 5.3 GHz 5.8 GHz dBm — 30.5 29.5 27.0 — Linear Pout 2.4 GHz, OFDM, QAM-64,54 Mbps, EVM = 2.5% 3V 5V 8V dBm — 21.0 27.5 30.0 — 2nd Harmonic 2.4 GHz, PIN = 20 dBm 5.3 GHz, PIN = 20 dBm 5.8 GHz, PIN = 20 dBm dBc — -80 -71 -71 — 3rd Harmonic 2.4 GHz, PIN = 20 dBm 5.3 GHz, PIN = 20 dBm 5.8 GHz, PIN = 20 dBm dBc — -83 -71 -72 — TRISE, TFALL 10% to 90% RF and 90% to 10% RF ns — 13 — TON, TOFF 50% control to 90% RF and 50% control to 10% RF ns — 35 — Transients — mV — 14 — Control Current |VC| = 3 V µA — 1 5 RON t > 90 ms after OFF to ON Switching (settled) Ω — 2.50 — Gate Lag |ΔRon| between 15 µs and 90 ms after OFF to ON Switching Ω — 0.15 — 6. For positive voltage control, external DC blocking capacitors are required on all RF ports. 7. Electrical minimum and maximum specifications are guaranteed in final package assembly only. 8. Insertion loss can be optimized by varying the DC blocking capacitor value. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008121 GaAs Broadband SPDT Switch DC - 8 GHz MASW-007107 Rev. V8 Absolute Maximum Ratings9,10 Truth Table11,12 Parameter Absolute Maximum Input Power @ 3 V Control 32 dBm 1 Input Power @ 5 V Control 34 dBm 0 Operating Voltage 8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Control VC1 Control VC2 RFC - RF1 RFC - RF2 0 On Off 1 Off On 11. Positive Control: 1 = +2.9 V to +8.0 V, 0 = 0 V + 0.2 V. Negative Control: 1 = 0 V + 0.2 V, 0 = -2.9 V to -8.0 V 12. If using negative control, external DC blocking capacitors can be omitted on RF ports, provided that the DC level of the external circuit on the RF port is 0 VDC. 9. Exceeding any one or combination of these limits may cause permanent damage to this device. 10. MACOM does not recommend sustained operation near these survivability limits. Qualification Application Schematic Qualified to MACOM Process Flow -2. REL-201, VC1 RF1 C1 Handling Procedures GND RFC C2 C3 specification Please observe the following precautions to avoid damage: GND N/C Static Sensitivity RF2 VC2 These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. C1, C2, C3 = 8 pF 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008121 GaAs Broadband SPDT Switch DC - 8 GHz MASW-007107 Rev. V8 Typical Performance Curves Isolation vs. Frequency Return Loss vs. Frequency 0 50 -5 +25°C -40°C +85°C +25°C -40°C +85°C 40 -10 30 -15 20 -20 10 -25 0 -30 0 2 4 6 8 10 0 2 4 Frequency (GHz) 6 8 10 Frequency (GHz) Insertion Loss vs. Frequency EVM vs. Pout @ 2.4 GHz 2.0 10 +25°C -40°C +85°C 1.5 8 EVM @ 3 V EVM @ 5 V EVM @ 8 V 6 1.0 4 0.5 2 0.0 0 2 4 6 Frequency (GHz) 8 10 0 0 5 10 15 20 25 30 35 Pout (dBm) 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008121 GaAs Broadband SPDT Switch DC - 8 GHz MASW-007107 Rev. V8 Die Outline Drawing13,14,15,16 7 1 0.0189 (0.480) Die Bond Pad Configuration Name Description 1 VC1 Voltage Control 1 2 RF1 RF Output 1 3, 4 GND Ground 5 RF2 RF Output 2 6 VC2 Voltage Control 2 7 RFC RF Common 6 2 0.0158 (0.4025) Pad # 5 0.0155 (0.395) 0.0109 (0.2775) 3 4 0.036 (0.0925) 0.004 (0.1005) 0.0110 (0.2795) 0.018 (0.4585) 0.0181 (0.461) 0.0191 (0.486) 0.022 (0.560) Die Size - Inches (mm) 0.022 x 0.0189 x 0.008 (0.56 x 0.48 x 0.203) 13. 14. 15. 16. Typical dimensions in inches (millimeters). Die thickness is 0.008” (0.203 mm). Typical bond pad is 0.003” square (0.076 mm square). Bond pad metallization is gold. Lead Free 2 mm 8-lead PDFN † † 5 Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008121 GaAs Broadband SPDT Switch DC - 8 GHz MASW-007107 Rev. V8 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008121