MASW-007588-TR3000

MASW-007588 GaAs Broadband SPDT Switch DC - 6.0 GHz Features            Rev. V1 Functional Schematic UNII, Hiperlan, and 802.11a+b/g Applications Broadband Performance: DC-6 GHz Low Insertion Loss: 0.9 dB at 6 GHz High Isolation: 28 dB Typical Fast Switching Speed: 0.5 µm GaAs PHEMT High Power: 36 dBm P1dB Fast Settling for Low Gate Lag Requirements Lead-Free 3 mm 12-lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible RFC GND GND VC1 VC2 RF1 RF2 GND GND GND GND GND Pin Configuration Description PIN No. PIN Name Description 1 VC1 Control 1 2 RF1 RF Port 1 3 GND Ground 4 GND Ground The MASW-007588, with its small size and low height, is ideal for 802.11a and 802.11b/g PC card and access point applications. 5 GND Ground 6 GND Ground 7 GND Ground The MASW-007588 delivers high isolation, low insertion loss and high linearity up to 6 GHz. 8 RF2 RF Port 2 9 VC2 Control 2 10 GND Ground 11 RFC RF Input 12 GND M/A-COM’s MASW-007588 is a broadband GaAs PHEMT MMIC SPDT switch in a low cost, lead-free 3 mm 12-lead PQFN package. The MASW-007588 is ideally suited for applications where very small size and low cost are required. The MASW-007588 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. 13 Paddle Ground 2 RF and DC Ground 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. 1 Ordering Information Part Number Package MASW-007588-TR3000 3000 piece reel MASW-007588-000SMB Sample Test Board (Includes 5 Samples) Absolute Maximum Ratings 3,4 Parameter Absolute Maximum Input Power @ 3 V Control +37 dBm Input Power @ 5 V Control +39 dBm Operating Voltage +8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Reference Application Note M513 for reel size information. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-007588 GaAs Broadband SPDT Switch DC - 6.0 GHz Rev. V1 Electrical Specifications5: TA = 25°C, Z0 = 50, Vc = 0 V/3 V, Pin = 0 dBm Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 2.4 GHz 5.3 GHz 5.8 GHz dB dB dB — — — 0.70 0.85 0.85 1.05 1.2 1.2 Isolation 2.4 GHz 5.3 GHz 5.8 GHz dB dB dB 24 23 21 29 28 26 — — — Return Loss DC - 6 GHz dB — 20 — IP2 Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz 2.4 GHz, Vc = 3.0 V 5.8 GHz, Vc = 3.0 V 2.4 GHz, Vc = 5.0 V 5.8 GHz, Vc = 5.0 V dBm dBm dBm dBm — — — — 98 81 107 87 — — — — IIP3 Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz 2.4 GHz, Vc = 3.0 V 5.8 GHz, Vc = 3.0 V 2.4 GHz, Vc = 5.0 V 5.8 GHz, Vc = 5.0 V dBm dBm dBm dBm — — — — 57 53 57 54 — — — — Input P-1dB 2.4 GHz 5.3 GHz 5.8 GHz dBm dBm dBm — — — 40 36 37 — — — 2nd Harmonic 2.4 GHz, Pin = +20 dBm 5.8 GHz, Pin = +20 dBm dBm dBm — — -72 -69 — — 3rd Harmonic 2.4 GHz, Pin = +20 dBm 5.8 GHz, Pin = +20 dBm dBm dBm — — -85 -75 — — T-rise, T-fall 10% to 90% RF and 90% to 10% RF nS — 55 — Ton, Toff 50% control to 90% RF, and 50% control to 10% RF nS — 80 — Transients — mV — 14 — Control Current |Vc| = 3 V µA — 15 25 Truth Table 5,6,7 Handling Procedures Please observe the following precautions to avoid damage: Control V1 Control V2 1 0 On Off Static Sensitivity 0 1 Off On Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. RFC– RF1 RFC—RF2 5. For positive voltage control, external DC blocking capacitors are required on all RF ports. 6. Differential voltage, V(state 1) - V(state 0), must be +2.7 V minimum and must not exceed +5 V. 7. 0 = 0 ± 0.2 V, 1 = +2.9 V to +5 V. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-007588 GaAs Broadband SPDT Switch DC - 6.0 GHz Rev. V1 Typical Performance Curves Insertion Loss Isolation 40 1.4 +25°C +85°C -30°C +25°C +85°C -30°C 1.2 35 1.0 30 0.8 25 0.6 20 0.4 1 2 3 4 5 1 6 2 3 4 5 6 Frequency (GHz) Frequency (GHz) Application Schematic Return Loss 0 +25°C +85°C -30°C -5 C1, C2, C3 = 8 pF C3 -10 GND -15 RFC GND -20 -25 -30 VC1 VC2 RF1 RF2 C1 -35 C2 GND GND -40 1 2 3 4 5 6 Frequency (GHz) Lead-Free 3 mm 12-lead PQFN† † GND GND GND Reference Application Note M538 for lead-free solder reflow recommendations. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-007588 GaAs Broadband SPDT Switch DC - 6.0 GHz Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 4 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support