MASW-008543-001SMB

MASW-008543 SPDT High Isolation Terminated Switch 0.01- 4.0 GHz Features Rev. V4 Functional Block Diagram  Positive Voltage Control  High Isolation: 62 dB @ 1 GHz 65 dB @ 2 GHz  Low Insertion Loss: 0.65 dB @ 1 GHz 0.70 dB @ 2 GHz  50 Ω Internal Terminations  Fast Settling for Low Gate Lag requirements  Lead-Free MSOP-8-EP Package  Halogen-Free “Green” Mold Compound  RoHS* Compliant and 260°C Reflow Compatible Pin 1 1 8 2 7 3 6 4 5 Description The MASW-008543 GaAs monolithic switch provides high isolation in a lead-free, plastic surface mount package. This device is ideal for applications across a broad range of frequencies. Pin Configuration3 MACOM fabricates the MASW-008543 using a 0.5-micron gate length pHEMT process. The process features full chip passivation for performance and reliability. Pin Function Pin Function 1 V1 5 RF Port 2 2 V2 6 Ground 3 RF Common 7 Ground 4 Ground 8 RF Port 1 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. Ordering Information1,2 Part Number Package MASW-008543-000000 Bulk Packaging MASW-008543-TR3000 3000 piece reel Please observe the following precautions to avoid damage: MASW-008543-001SMB Sample Board Static Sensitivity 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Handling Procedures Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MASW-008543 SPDT High Isolation Terminated Switch 0.01- 4.0 GHz Rev. V4 Electrical Specifications4: TA = 25°C, VHIGH = 3 V, VLOW = 0 V, Z0 = 50 Ω Parameter Test Conditions Insertion Loss 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz Units Min. Typ. Max. dB — 0.65 0.70 0.85 1.10 — 0.95 — — Isolation 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz dB — 62 — — 62 65 50 45 — Return Loss 0.5 - 4.0 GHz dB — 20 — Input IP3 2-Tone, 2.1 GHz, 10 MHz spacing dBm — 53 — P1dB 2.1 GHz, VHIGH = 3 V 2.1 GHz, VHIGH = 5 V dBm — 25 30 — P0.1dB 2.1 GHz, VHIGH = 3 V 2.1 GHz, VHIGH = 5 V dBm — 20 25 — TRISE, TFALL 10% to 90% RF & 90% to 10% RF ns — 30 — TON, TOFF 50% of VC to 10% / 90% RF ns — 52 — Transients In-band mV — 12 — Control Current - µA —