MASW-008899-TR3000

MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Features         Functional Schematic Low Insertion Loss: 0.4 dB @ 2.4 GHz Moderate Isolation: 27 dB @ 2.4 GHz Low Power Consumption: 5 μA @ +3.0 V Reduced Gate Lag for Fast Settling Time Lead-Free SC70-6LD Package 100% Matte Tin Plating over Copper Halogen-Free ―Green‖ Mold Compound RoHS* Compliant and 260°C Reflow Compatible C = 39 pF V1 RFC V2 RF1 GND RF2 Description M/A-COM’s MASW-008899 is a GaAs PHEMT MMIC SPDT switch in a lead-free SC-70 (SOT-363) surface mount plastic package. The MASW-008899 is ideally suited for applications where very small size and low cost are required. Typical applications are transmit / receive (Tx / Rx) switching in linear systems such as WLAN 802.11b/g. Other applications include 1.9 GHz and 2.4 GHz DECT and linear systems operating up to 3.0 GHz. Pin 1 C = 39 pF Pin Configuration The MASW-008899 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information1,2 Part Number C = 39 pF Pin No. Pin Name Description 1 RF1 RF Port 1 2 GND Ground 3 RF2 RF Port 2 4 V2 Control 2 5 RFC RF Input 6 V1 Control 1 Absolute Maximum Ratings 3,4 Package Parameter Absolute Maximum MASW-008899-000000 Bulk packaging Input Power (0.5 - 3.0 GHz) 3 V Control +30 dBm MASW-008899-TR3000 3000 piece reel Voltage -8.5 V < Vc < +8.5 V MASW-008899-001SMB Sample Board, DC - 3.0 GHz Tuning Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 50 Ω 5 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss6 1.0 GHz 2.4 GHz dB dB — — 0.3 0.4 — 0.5 Isolation 1.0 GHz 2.4 GHz dB dB — 25 24 27 — — VSWR 0.05 - 3.0 GHz Ratio — 1.2:1 — IP2 Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz dBm — 80 — IP3 Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz dBm — 48 — Linear Pout 2.5 GHz, OFDM, QAM-64,54Mbps, EVM=2.5% 3.0 V 3.3 V 5.0 V dBm dBm dBm — — — 22.5 24.0 28.5 — — — P1dB — dBm — 28 — Trise, Tfall 10% to 90% RF and 90% to 10% RF ns — 35 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF ns — 40 — Transients — mV — 10 — Current VC = 3.0 V µA — 5 10 RON t > 10 ms after OFF to ON Switching (settled) Ω — 1.5 2.5 Gate Lag |ΔRon| between 200 µs and 10 ms after OFF to ON Switching Ω — 0.15 0.25 5. For positive voltage control, external DC blocking capacitors are required on all RF ports. 6. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz – 1.0 GHz, 39 pF for 0.5 - 3.0 GHz. Truth Table 7,8 Qualification Control V1 Control V2 RFC-RF1 RFC-RF2 0 1 On Off 1 0 Off On 7. Differential voltage, V (state 1) - V (state 0), must be +2.3 V minimum and must not exceed 8.5 V. 8. 0 = 0 V ± 0.2 V, 1 = +2.5 V to 5.0 V Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Typical Performance Curves Isolation Insertion Loss 0.6 30 +25°C -40°C +85°C 0.5 28 0.4 26 0.3 24 0.2 0.5 1.0 1.5 2.0 2.5 3.0 +25°C -40°C +85°C 22 0.5 1.0 Frequency (GHz) 1.5 2.0 2.5 3.0 30 35 Frequency (GHz) VSWR EVM vs. Pout @ 2.5 GHz 10 1.4 +25°C -40°C +85°C 1.3 8 3.0 V 3.3 V 5.0 V 6 1.2 4 1.1 2 1.0 0.5 0 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 10 15 20 25 Pout (dBm) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Lead-Free SC70-6LD (SOT-363)† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support