MASW-011040-TR0500

MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Features         Functional Schematic 200 W CW Incident Power @ +85°C Low Insertion Loss: 40 dB Harmonics: 13 — Input Return Loss RFC - RF2 & RFC - RF3 PIN = 0 dBm dB — >20 — dBm / W — 53 / 200 52 / 158 — dBm / W — 50 / 100 49 / 80 — dBm — 54 53 — dBm — 51 50 — CW Input Power RFC - RF1 & RFC - RF4 CW Input Power RFC - RF2 & RFC - RF3 P0.1dB RFC - RF1 & RFC - RF4 P0.1dB RFC - RF2 & RFC - RF3 85°C base plate, 550 MHz 950 MHz 85°C base plate, 550 MHz 950 MHz 85°C base plate, 550 MHz 950 MHz 85°C base plate, 550 MHz 950 MHz 2nd Harmonics PIN = 49 dBm, F = 950 MHz dBc — -75 — 3rd Harmonics PIN = 49 dBm, F = 950 MHz dBc — -85 — TON, TOFF (50% CTL - 90% RF and 10% RF) 1 MHz Rep Rate in Modulating Mode µs — 3.5 — TRISE, TFALL (10-90% RF Voltage) 1 MHz Rep Rate in Modulating Mode µs — 0.8 — 4. See Bias table. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Bias Table5 RF State V1 Bias (V) V2 Bias (V) V3 Bias (V) V4 Bias (V) V5 Bias (V) B1 Bias (V) B2 Bias (V) B3 Bias (V) B4 Bias (V) RFC - RF1 Low Loss RFC - RF2 Isolation RFC - RF3 Isolation RFC - RF4 Isolation 0V@ 400 mA 100 V @ 100 V @ 100 V @ 25 mA 25 mA 25 mA 5V@ 400 mA 100 V @ 0 mA 0V@ 25 mA 0V@ 25 mA 0V@ 25 mA RFC - RF2 Low Loss RFC - RF1 Isolation RFC - RF3 Isolation RFC - RF4 Isolation 100 V @ 25 mA 0V@ 100 V @ 100 V @ 200 mA 25 mA 25 mA 3V@ 200 mA 0V@ 25 mA 100 V @ 0 mA 0V@ 25 mA 0V@ 25 mA RFC - RF3 Low Loss RFC - RF1 Isolation RFC - RF2 Isolation RFC - RF4 Isolation 100 V @ 100 V @ 25 mA 25 mA 0V@ 200 mA 100 V @ 25 mA 3V@ 200 mA 0V@ 25 mA 0V@ 25 mA 100 V @ 0 mA 0V@ 25 mA RFC - RF4 Low Loss RFC - RF1 Isolation RFC - RF2 Isolation RFC - RF3 Isolation 100 V @ 100 V @ 100 V @ 25 mA 25 mA 25 mA 0V@ 400 mA 5V@ 400 mA 0V@ 25 mA 0V@ 25 mA 0V@ 25 mA 100 V @ 0 mA 5. DC reverse bias of a PIN diode operating at a high power is dependent on RF frequency, incident power, and VSWR. See Minimum Reverse DC Voltage table for high power operation. Absolute Maximum Ratings6,7 Minimum Reverse DC Voltage8 Parameter Absolute Maximum Frequency (MHz) Minimum Reverse DC Voltage Forward Current +400 mA 50 | -142 V | Reverse DC Voltage | -150 V | 100 | -102 V | Operating Temperature -55°C to +85°C 200 | -60 V | Storage Temperature -65°C to +150°C 500 | -26 V | Junction Temperature +175°C 1000 | -13 V | 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. MACOM does not recommend sustained operation near these survivability limits. 8. Required to maintain low loss under 200 W of incident power with 1.5:1 VSWR. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Typical Performance Curves: Insertion Loss Return Loss 0.0 0 -5 -0.1 -10 -15 (dB) (dB) -0.2 RFC - RF1 RFC - RF4 RFC - RF2 RFC - RF3 -0.3 -20 -25 -0.4 RFC - RF1 RFC - RF4 RFC - RF2 RFC - RF3 -0.5 -0.6 0.0 0.2 -30 -35 0.4 0.6 0.8 -40 0.0 1.0 0.2 Frequency (GHz) Isolation RFC - RF1 0.8 1.0 0.8 1.0 0.8 1.0 0 -10 -10 RFC - RF1 Iso, RF2 IL RFC - RF1 Iso, RF3 IL -20 -30 -40 -40 -50 -60 -60 0.2 0.4 0.6 0.8 -70 0.0 1.0 RFC - RF1 Iso, RF4 IL -30 -50 -70 0.0 RFC - RF2 Iso, RF1 IL RFC - RF2 Iso, RF3 IL -20 RFC - RF1 Iso, RF4 IL (dB) (dB) 0.6 Isolation RFC - RF2 0 0.2 Frequency (GHz) 0.4 0.6 Frequency (GHz) Isolation RFC - RF4 Isolation RFC - RF3 0 0 -10 -10 RFC - RF3 Iso, RF1 IL RFC - RF3 Iso, RF2 IL -20 -30 -40 -40 -50 -60 -60 0.2 0.4 0.6 Frequency (GHz) 0.8 1.0 RFC - RF4 Iso, RF3 IL -30 -50 -70 0.0 RFC - RF4 Iso, RF1 IL RFC - RF4 Iso, RF2 IL -20 RFC - RF3 Iso, RF4 IL (dB) (dB) 0.4 Frequency (GHz) -70 0.0 0.2 0.4 0.6 Frequency (GHz) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Application Schematic Off-Chip Component Values RFC C10 C9 L5 R5 V5 V1 L1 GND N/C RFC GND N/C N/C V4 C1 RF1 RF1 C8 N/C L4 RF4 RF4 C2 Component Value C1,C3,C6,C8,C9 1000 pF C2,C4,C5,C7,C10 270 pF L1 - L5 680 nH R1 - R4 4.4 kΩ R59 10 Ω C7 N/C N/C R1 R4 N/C B4 R2 Handling Procedures R3 B2 B3 V2 C3 L2 C4 RF2 9. Must be rated for appropriate power handling. B3 RF3 N/C N/C B4 RF2 B1 B2 B1 L3 C5 V3 C6 RF3 Please observe the following precautions to avoid damage: Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these Class 1B HBM devices. Lead Free 9 mm HQFN 20-Lead† All dimensions shown as inches/mm. † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 3 requirements. Plating is NiPdAuAg. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support