MASW-011055-TR0500

Switch, SP2T 100 W Reflective 0.03 - 3.0 GHz MASW-011055 Rev. V3 Features Functional Schematic • Suitable for High Power Military and Civilian Radio Applications • Power Handling: 100 W @ 85°C • Insertion Loss: 0.35 dB @ 2 GHz • Isolation: 51 dB @ 2 GHz • Lead-Free 5 mm HQFN-12LD Package • RoHS* Compliant Applications • ISM / MM N/C RFC N/C 12 11 10 N/C 1 9 N/C N/C 2 8 N/C RF1 3 7 RF2 Description The MASW-011055 is a high power PIN diode SP2T switch in a common anode configuration, operating from 30 MHz to 3 GHz. It features low insertion loss and excellent linearity. This device is capable of handling 100 Watts CW incident power at a base plate temperature of 85ºC. This high power switch is ideal for use on land mobile radio and MIL-COM applications that require higher CW and pulsed power operation. The MASW-011055 is manufactured using MACOM’s hybrid manufacturing process featuring high voltage PIN diodes and passive devices integrated in a 5 mm HQFN 12-lead plastic package. 4 5 6 B1 N/C B2 Pin Configuration Pin # Function 1, 2, 5, 8, 9, 10, 12 No Connection 3 RF1 / V1 Bias 4 B1 Bias 6 B2 Bias 7 RF2 / V2 Bias 1 Ordering Information MASW-011055-TR0500 500 piece reel 11 RFC / V3 Bias MASW-011055-SMB Sample Board 0.5 - 3 GHz Paddle2 Ground 1. Reference Application Note M513 for reel size information. 1 2. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006482 Switch, SP2T 100 W Reflective 0.03 - 3.0 GHz MASW-011055 Rev. V3 Electrical Specifications: TA = 25°C, Bias3 = +5 / 0 V, 50 mA / 100 mA Parameter Test Conditions Units Min. Typ. Max. Insertion Loss PIN = 0 dBm 0.5 GHz 1 GHz 2 GHz dB — 0.10 0.20 0.35 — 0.50 — Isolation PIN = 0 dBm 0.5 GHz 1 GHz 2 GHz dB — 48 — 52 54 51 — Input Return Loss PIN = 0 dBm dB — >15 — CW Input Power 25°C base plate, 2 GHz dBm W — 52 158 — CW Input Power 85°C base plate, 2 GHz dBm W — 50 100 — P0.1dB 25°C base plate, 2 GHz dBm — >52 — Input IP3 F1 = 2000 MHz, F2 = 2010 MHz PIN = 40 dBm/Tone, 28 V dBm — 66 — RF Switching Speed (10-90% RF Voltage) 1 MHz Rep Rate in Modulating Mode ns — 500 — 3. See Bias table. Bias (+5 V / 0 V for Small Signal Testing)4 V1 Bias (V) V2 Bias (V) V3 Bias (V) B1 Bias (V) B2 Bias (V) RFC – RF1 Low Loss RFC – RF2 Isolation 0 V @ -100 mA +5 V @ 50 mA +5 V @ 100 mA +5 V @ 0 mA 0 V @ -50 mA RFC – RF2 Low Loss RFC – RF1 Isolation +5 V @ 50 mA 0 V @ -100 mA +5 V @ 100 mA 0 V @ -50 mA +5 V @ 0 mA RF State 4. DC reverse bias of a PIN Diode operating at a high power is dependent on RF frequency, incident power, and VSWR. See Minimum Reverse DC Voltage table for high power operation. 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006482 Switch, SP2T 100 W Reflective 0.03 - 3.0 GHz MASW-011055 Rev. V3 Minimum Reverse DC Voltage5 Frequency (MHz) Minimum Reverse DC Voltage 30 120 V 100 119 V 200 114 V 300 106 V 500 90 V Application Schematic RFC C8 C7 L5 V3 R3 V1 1000 59 V 1500 43 V 2000 33 V V2 C6 C1 L1 RF1 L4 C2 C5 L2 R1 L3 RF3 R2 B1 B2 C3 C4 5. Required to maintain low loss under 100 W of incident power with 1.5:1 VSWR. Absolute Maximum Ratings6,7 Parameter Absolute Maximum Off-Chip Component Values Component Operating Frequency Size 0.03 - 1.0 GHz 0.5 - 3.0 GHz Forward Current 200 mA C1, C3, C4, C6, C7, C8 0.1 µF 270 pF 0603 Reverse DC Voltage 150 V C2, C5, C8 0.1 µF 27 pF 0603 Operating Temperature -40°C to +85°C L1 - L5 3.3 µH 82 nH 0603 Storage Temperature -55°C to +150°C R1 - R28 82 Ω 82 Ω 1210 Junction Temperature +175°C R38 39 Ω 39 Ω 1210 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. MACOM does not recommend sustained operation near these survivability limits. 8. Resistance values are used for small signal testing under +5 V / 0 V bias conditions. 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006482 Switch, SP2T 100 W Reflective 0.03 - 3.0 GHz MASW-011055 Rev. V3 MASW-011055 with MADR-010574 Driver Application Schematic9 VDD C9 RFC C8 C7 TO B1 1 TO B3 SERIES2 C2 VCC SHUNT2 U1 TO B4 B2 C1 N/C GND GND N/C TO B2 SHUNT1 C1 IBIAS SERIES1 C10 R4 VCC R3 VDD N/C N/C GND PADDLE L5 VCC RF1 L4 L1 C5 B1 C2 C6 C2 VCC C11 B3 R1 L2 C3 L3 R2 C4 RF3 B4 VCC N/C A GND C1 U2 VCC Y C12 9. See page 3 for R3, L1 - L5 and C1 - C8 values. Parts List Handling Procedures Please observe the following precautions to avoid damage: C9 0.01 µF C10 - C12 0.1 µF R1, R210 12 kΩ R4 499 kΩ U2 SN74AHC1G Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these Class 1B HBM devices. 10. Resistor values calculated to provide ~10 mA of shunt diode bias current given VCC = 5 V and VDD = 120 V. 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006482 Switch, SP2T 100 W Reflective 0.03 - 3.0 GHz MASW-011055 Rev. V3 Typical Performance Curves @ +25°C (using external bias tees): Insertion Loss Isolation 0.0 0 -10 -0.2 RFC - RF1 RFC - RF2 -20 (dB) (dB) -0.4 -0.6 -1.0 -40 -50 RFC - RF1 RFC - RF2 -0.8 -30 -60 0.0 0.5 1.0 1.5 2.0 2.5 -70 0.0 3.0 0.5 1.0 Frequency (GHz) 1.5 2.0 2.5 3.0 2.5 3.0 Frequency (GHz) Input Return Loss Output Return Loss 0 0 RFC - RF1 RFC - RF2 -10 RFC - RF1 RFC - RF2 -10 (dB) -20 (dB) -20 -30 -30 -40 -40 -50 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 -50 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006482 Switch, SP2T 100 W Reflective 0.03 - 3.0 GHz MASW-011055 Rev. V3 Lead Free 5 mm 12-Lead HQFN † † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is NiPdAuAg. 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006482 Switch, SP2T 100 W Reflective 0.03 - 3.0 GHz MASW-011055 Rev. V3 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 7 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0006482