MASW-011071

20 W HMIC Silicon PIN Diode Terminated SPDT Switch 8.0 - 10.5 GHz MASW-011071 Rev. V2 Features • • • • • • Functional Diagram Low Insertion Loss: 1 dB High Isolation: 38 dB Integrated Bias Network and Termination Circuit Greater than 20 W CW Power Handling @ +70°C Lead-Free 7 mm 44-lead PQFN Package RoHS* Compliant N/C 44 N/C Applications 42 41 40 39 38 37 36 35 34 331 2 32 3 31 4 30 Rterm2 Rterm1 6 1 J2 Description The MASW-011071 is a terminated silicon PIN diode SPDT switch designed for X-Band high power, high performance applications. The switch is assembled in a lead-free 7 mm 44-lead PQFN plastic package and handles greater than 20 W of CW power over the 8.0 - 10.5 GHz frequency band. The device is fabricated using MACOM’s patented HMIC process, which allows for the integration of silicon pedestals that embed series and shunt diodes in low loss, low dispersion glass. The switch offers 1 dB insertion loss as well as 38 dB isolation performance. The device integrates a bias network to allow for simplified bias application and switch control. C C C 281 C 27 7 SW1 8 N/C N/C 29 5 • ISM / MM SW2 J3 26 9 25 10 24 N/C 23 11 12 B2 13 14 15 16 N/C 17 J1 18 19 20 N/C 21 22 B3 Pin Configuration Ordering Information1,2 Pin # Port Function 7 J2 RFOUT 12 B2 Bias of J2 17 J1 RFCOMMON 22 B3 Bias of J3 27 J3 RFOUT MASW-011071-TR0500 500 piece reel 1-6, 8-11, 13-16, 18-21, 23-26, 28-44 N/C No Connection3 MASW-011071-001SMB Sample Board 45 Pad Ground4 1. Reference Application Note M513 for reel size information. 2. All sample boards include 3 loose parts. 1 43 1 1 3. MACOM recommends connecting all No Connection (N/C) pins to ground. 4. The paddle on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007286 20 W HMIC Silicon PIN Diode Terminated SPDT Switch 8.0 - 10.5 GHz MASW-011071 Rev. V2 Electrical Specifications5: TA = +25°C, Z0 = 50 Ω, PIN = 0 dBm (unless otherwise noted) Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 8.0 GHz 8.5 GHz 9.5 GHz 10.5 GHz dB — 0.9 1.0 1.0 1.2 — — 1.4 — Input to Output Isolation 8.0 GHz 8.5 GHz 9.5 GHz 10.5 GHz dB — — 32 — 36 37 39 38 — Input Return Loss 8.0 GHz 8.5 GHz 9.5 GHz 10.5 GHz dB — 26 26 31 19 — Return Loss (Termination) 8.0 GHz 8.5 GHz 9.5 GHz 10.5 GHz dB — — 14 — 12 16 28 18 — P0.1dB 9.5 GHz (+5 V, -30 V) dBm — 44.5 — Input IP3 10 GHz, +20 dBm, 10 MHz spacing dBm — 60 — Switching Speed6 10 GHz, +/- 4 V, PW 500 ns, 50% duty cycle ns — 130 — 5. See Driver Connections table. 6. Typical switching speed measured from 10% to 90 % of detected RF signal driven by TTL compatible drivers. MACOM recommends the MADR-011020, Complementary Channel TTL PIN Diode Driver. Bias Control7 Driver Connections Optimal operation is achieved by simultaneous application of negative DC voltage to the low loss switch path and positive DC voltage to the isolating switch path. DC Control Voltages (DC Currents) B2 B3 J1-J2 J1-J3 In the low loss path, the diodes are reverse biased. In the isolating path, the diodes are forward biased. -5 V7 (0 mA) +5 V (55 mA typ.) Insertion Loss Isolation Minimum Reverse Bias Required: At X-Band, with a 1:1 match, 5 V of reverse bias is required. With a 4:1 match, 10 V of reverse bias is required. +5 V (55 mA typ.) -5 V7 (0 mA) Isolation Insertion Loss However MACOM recommends 30 V of reverse bias to achieve optimal operating conditions. Condition of RF Output 7. R. Caverly and G. Hiller, “Establishing the Minimum Reverse Bias for a P-I-N Diode in a High Power Switch,” IEEE Transactions on Microwave Theory and Techniques, Vol.38, No.12, December 1990. 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007286 20 W HMIC Silicon PIN Diode Terminated SPDT Switch 8.0 - 10.5 GHz MASW-011071 Rev. V2 Absolute Maximum Ratings8,9 Handling Procedures Please observe the following precautions to avoid damage: DC Reverse Voltage 100 V Bias Current 100 mA @ +70°C RF CW Incident Power10 Transmission Termination 20 W @ +70°C 1 W @ +70°C Junction Temperature +175°C Operating Temperature -40°C to +70°C Storage Temperature -65°C to +150°C Static Sensitivity Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these HBM Class 1A devices. 8. Exceeding any one or combination of these limits may cause permanent damage to this device. 9. MACOM does not recommend sustained operation near these survivability limits. 10. Maximum source or load VSWR 1.2:1. Functional Schematic B3 B2 J1 J3 J2 MASW-011071 with MADR-011020 Driver Application Schematic11 VCC VEEA VSEQ C1 DS EN C2 Driver C1 B3 B2 C2 A To B2 B To B3 J1 J2 J3 TERM TERM C3 VEEB 11. Recommended bias with this driver is VCC = 5 V and VEEB = -30 V. 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007286 20 W HMIC Silicon PIN Diode Terminated SPDT Switch 8.0 - 10.5 GHz MASW-011071 Rev. V2 Typical Performance: Bias = ±5 V, PIN = 0 dBm (Unless otherwise stated) Insertion Loss vs. Frequency Isolation vs. Frequency 0.0 -10 +25°C +85°C +25°C +85°C -20 S21 (dB) S21 (dB) -0.5 -1.0 -1.5 -2.0 -30 -40 7 8 9 10 11 -50 12 7 8 9 Frequency (GHz) Input Return Loss vs. Frequency (Transmission) +25°C +85°C S22 (dB) S11 (dB) -10 -20 -20 +25°C +85°C -30 -30 7 8 9 10 11 -40 12 7 8 9 10 11 12 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Bias Voltage, 9.5 GHz, 43 dBm CW Insertion Loss vs. CW Power, 9.5 GHz, -30 V -0.6 -0.6 +25°C +85°C -0.8 S21 (dB) -0.8 S21 (dB) 12 0 -10 -1.0 -1.2 -1.4 11 Output Return Loss vs. Frequency (Termination) 0 -40 10 Frequency (GHz) -1.0 +25°C +85°C -1.2 0 5 10 15 20 Reverse Bias (V) 25 30 -1.4 35 37 39 41 43 45 Input Power (dBm) 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007286 20 W HMIC Silicon PIN Diode Terminated SPDT Switch 8.0 - 10.5 GHz MASW-011071 Rev. V2 Outline Drawing † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is NiPdAuAg. 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007286 20 W HMIC Silicon PIN Diode Terminated SPDT Switch 8.0 - 10.5 GHz MASW-011071 Rev. V2 MACOM Technology Solutions Inc. (“MACOM”). All rights reserved. These materials are provided in connection with MACOM’s products as a service to its customers and may be used for informational purposes only. Except as provided in its Terms and Conditions of Sale or any separate agreement, MACOM assumes no liability or responsibility whatsoever, including for (i) errors or omissions in these materials; (ii) failure to update these materials; or (iii) conflicts or incompatibilities arising from future changes to specifications and product descriptions, which MACOM may make at any time, without notice. These materials grant no license, express or implied, to any intellectual property rights. THESE MATERIALS ARE PROVIDED "AS IS" WITH NO WARRANTY OR LIABILITY, EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHT, ACCURACY OR COMPLETENESS, OR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0007286