MASWSS0115TR-3000

MASWSS0115 GaAs SPDT Switch DC - 3.0 GHz Rev. V6 Features        Functional Schematic Insertion Loss: 0.3 dB @ 2.4 GHz Isolation: 22 dB @ 2.4 GHz Power Consumption: 50 MHz dBm — 90 — IP3 Two Tone, +5 dBm/tone, 5 MHz Spacing, >50 MHz dBm — 46 — P1dB VC = 0 V/2.5 V VC = 0 V/3.0 V dBm dBm — — 21 25 — — Trise, Tfall 10% to 90% RF, 90% to 10% RF ns — 35 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF ns — 40 — Transients In band mV — 10 — Control Current VC = 2.5 V µA — 5 20 6. External DC blocking capacitors are required on all RF ports. 7. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz. Truth Table 8,9 Die Bond Pad Layout Control V1 Control V2 RFC-RF1 RFC-RF2 0 1 On Off 1 0 Off On 8. Differential voltage, V(state 1) - V(state 0), must be +2.3 V minimum. 9. 0 = 0 V ± 0.2 V, 1 = +2.3 V to 5.0 V Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0115 GaAs SPDT Switch DC - 3.0 GHz Rev. V6 Typical Performance Curves Isolation vs. Frequency Return Loss vs. Frequency 30 0 +25°C +85°C -40°C 10 20 26 30 24 40 22 50 0.5 1.0 +25°C +85°C -40°C 28 1.5 2.0 2.5 3.0 20 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Input P1dB Compression vs. Control Voltage @ 2.4 GHz, T=+25°C Insertion Loss vs. Frequency 35 0.5 +25°C +85°C -40°C 0.4 30 0.3 25 0.2 20 0.1 0 0.5 15 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 No pull-up 10 With pull-up 0 1 2 3 4 5 6 Control Voltage (Vdc) 10. RFC port is pulled up with a 5.1K resistor to fixed VDD equal VCTL high level. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0115 GaAs SPDT Switch DC - 3.0 GHz Lead-Free SC-70 (SOT-363)† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Rev. V6 MASWSS0115 GaAs SPDT Switch DC - 3.0 GHz Rev. V6 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 5 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support