MASWSS0130SMB

MASWSS0130 GaAs Broadband DPDT Diversity Switch 0.5 - 3.0 GHz      Pin 1 Rx GND Ideal for 802.11 b/g Applications Broadband Performance: 0.5 - 3.0 GHz Low Insertion Loss: 0.6 dB @ 2.4 GHz High Isolation: 25 dB @ 2.4 GHz Fast Switching Speed: 0.5 µm GaAs PHEMT Process High P1dB: 34 dBm @ 3 V Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free ―Green‖ Mold Compound RoHS* Compliant and 260°C Reflow Compatible Tx Functional Schematic Features      Rev. V5 GND GND GND GND Vc2 Vc1 Typical applications are for WLAN IEEE 802.11b/g systems that employ two antennas for transmit and receive diversity. Designed for high power, this DPDT switch is optimized for high linearity at 2.4 GHz. Pin Configuration PIN No. PIN Name Description 1 GND Ground 2 GND Ground 3 VC1 Control 1 4 ANT1 Antenna Port 1 The MASWSS0130 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information 1 Part Number Package MASWSS0130 Bulk Packaging MASWSS0130TR 7 inch, 1000 piece reel MASWSS0130TR-3000 13 inch, 3000 piece reel MASWSS0130SMB Sample Test Board (Includes 5 Samples) ANT2 ANT1 M/A-COM’s MASWSS0130 is a broadband GaAs PHEMT MMIC DPDT diversity switch in a low cost, lead-free 3 mm 12-lead PQFN plastic package. The MASWSS0130 is ideally suited for applications where very small size and low cost are required. GND Description 5 GND Ground 6 ANT2 Antenna Port 2 7 VC2 Control 2 8 GND Ground 9 GND Ground 10 Rx Receive Port 11 GND Ground 12 Tx Transmit Port 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0130 GaAs Broadband DPDT Diversity Switch 0.5 - 3.0 GHz Rev. V5 Electrical Specifications: TA = 25°C, Z0 = 50 Ω, VC = 0 V/3 V, 8 pF Capacitor 2,3 Parameter Test Conditions Units Min. Typ. Max. 2.4 GHz dB — 0.6 0.9 Isolation (on/off or off/on) 2.4 GHz dB 20 25 — Return Loss 2.4 GHz dB 23 — IP2 Two Tone, +15 dBm per tone, 5 MHz Spacing, 2.4 GHz dBm IIP3 Two Tone, +15 dBm per tone, 5 MHz Spacing, 2.4 GHz dBm Input P1dB 2.4 GHz dBm — 34 — Input P0.1dB 2.4 GHz dBm — 30 — 2nd Harmonic 2.4 GHz, PIN = 20 dBm dBm — -80 — 3 Harmonic 2.4 GHz, PIN = 20 dBm dBm — -95 — Trise, Tfall 10% to 90% RF 90% to 10% RF nS nS — — 34 35 — — Ton, Toff 50% control to 90% RF 50% control to 10% RF nS — — 48 54 — — mV — 7 — µA — 5 25 Insertion Loss 3 rd Transients Control Current |Vc| = 3 V — — 94 55 — — 2. External DC blocking capacitors are required on all RF ports. 3. Insertion loss can be optimized by varying the DC blocking capacitor value. Qualification Absolute Maximum Ratings 4,5 Parameter Absolute Maximum Input Power @ 3 V Control +35 dBm Input Power @ 5 V Control +35 dBm Operating Voltage +8.5 volts ° Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures ° Operating Temperature -40 C to +85 C Storage Temperature -65°C to +150°C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0130 GaAs Broadband DPDT Diversity Switch 0.5 - 3.0 GHz Rev. V5 Typical Performance Curves Isolation Insertion Loss 35 1.6 1.4 30 IL @ +25°C IL @ -30°C IL @ +85°C 1.2 Isolation (+25°C) Isolation (-30°C) Isolation (+85°C) 25 1.0 20 0.8 15 0.6 10 0.4 1 2 3 4 5 1 6 2 3 4 5 6 Frequency (GHz) Freqency (GHz) Output Return Loss Input Return Loss -5 -5 S11 @ +25°C S11 @ -30°C S11 @ +85°C -10 S22 @ +25°C S22 @ -30°C S22 @ +85°C -10 -15 -15 -20 -20 -25 -25 -30 -30 -35 -35 1 2 3 4 Frequency (GHz) 5 6 1 2 3 4 5 6 Frequency (GHz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0130 GaAs Broadband DPDT Diversity Switch 0.5 - 3.0 GHz Rev. V5 Evaluation Board Application Schematic Description 4 Capacitor, 8 pF, 0402, SMT, 5% (C1 - C4) Control Control VC1 VC2 Tx ANT 1- ANT 1- ANT 2- ANT 2Rx Tx Tx Rx C2 GND C1 Truth Table 6 Rx Qty 1 0 On Off On Off GND GND 0 1 Off On Off On GND GND 1 1 Off Off Off Off 0 0 Off Off Off Off Lead-Free 3 mm 12-Lead PQFN† C4 ANT2 GND ANT1 6. 1 = +2.9 to +5V, 0 = 0 + 0.2V Vc2 Vc1 C3 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0130 GaAs Broadband DPDT Diversity Switch 0.5 - 3.0 GHz Rev. V5 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support