MASWSS0181SMB

MASWSS0181 GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz Features           Rev. V3 Functional Schematic Low Voltage Operation: 2.5 V Harmonics: 50 MHz dBm — 57 — P0.1dB — dBm — 39 — Harmonic 1 GHz, PIN = 34 dBm dBc — -75 — 3rd Harmonic 1 GHz, PIN = 34 dBm dBc — -75 -67 TRISE, TFALL 10% to 90% RF, 90% to 10% RF µs — 0.04 — TON, TOFF 50% control to 90% RF, and 50% control to 10% RF µs — 0.06 — Transients In Band mV — 50 — Control Current — µA — — 50 2 nd 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 100 pF for 0.5 - 3 GHz. Qualification Qualified to MACOM specification REL-201, Process Flow -2. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Truth Table6,7 V1 V2 ANT– RF1 ANT - RF2 1 0 On Off 0 1 Off On 6. Differential voltage, V (state 1) - V (state 0), must be +2.5 V minimum and must not exceed +8 V. 7. 0 = -5 V to 2.5 V, 1 = -2.5 V to +5 V. Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008095 MASWSS0181 GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz Rev. V3 Typical Performance Curves vs. Temperature, 100 pF blocking capacitors Isolation vs. Frequency Insertion Loss vs. Frequency 1.0 40 +25°C -40°C +85°C 0.6 0.4 20 10 0.2 0.0 +25°C -40°C +85°C 30 Isolation (dB) Insertion Loss (dB) 0.8 0.0 0.5 1.0 1.5 2.0 2.5 0 3.0 0.0 0.5 Frequency (GHz) 2.0 2.5 3.0 3rd Harmonic vs. Control Voltage, PIN = 34 dBm CW, 1 GHz -60 -60 +25°C -40°C +85°C -65 Relative Harmonic (dBc) Relative Harmonic (dBc) 1.5 Frequency (GHz) 2nd Harmonic vs. Control Voltage, PIN = 34 dBm CW, 1 GHz -70 -75 -80 -85 -90 1.0 2.0 2.5 3.0 3.5 VC (V) 4.0 4.5 5.0 +25°C -40°C +85°C -65 -70 -75 -80 -85 -90 2.0 2.5 3.0 3.5 4.0 4.5 5.0 VC (V) 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008095 MASWSS0181 GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz Rev. V3 Lead-Free SOT-26 Plastic Package† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008095 MASWSS0181 GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz Rev. V3 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0008095