MEST2G-025-10-CM32

MEST2G-025-10-CM32 Pin Diode Switch Element Rev. V1 Features     Power Handling 25 W @ 4 GHz or less @ 100 mA Low Insertion Loss: 10 dB @ 2.0 GHz RoHS* Compliant Description The MEST2G-025-10-CM32 is a thermal to ground series diode switch element (EST2G) in an Aluminum Nitride package. This part is designed to handle up to 25 watts. Usable up to 4.0 GHz. Electrical Specifications: TC = +25°C (unless otherwise specified) Parameter Test Conditions Units Min. Typ. Max. Breakdown Voltage (VBR) IR = 10 µA V 200 — — Leakage Current (IR) VR = 100 V nA — 40 100 Forward Voltage (VF) IF = 100 mA V — 980 — Series Resistance (RS) IF = 100 mA, 100 MHZ Ω — 1.25 — Total Capacitance (CT) VR = -50 V, 1 MHz pF — 0.22 — Lifetime (t) IF = 10 mA, IR = 6 mA, 50% ns — 2000 — I-Region (w) I-Layer µm — 140 — Input / Output Return Loss (I/ORL) IF = 100 mA, 2 GHz IF = 100 mA, 4 GHz dB 27 20 32 26 — Insertion Loss (IL) IF = 100 mA, 2 GHz IF = 100 mA, 4 GHz dB — 0.06 0.07 0.15 0.15 Isolation (ISO) IF = 400 mA, 2 GHz IF = 400 mA, 4 GHz dB 8 — 10 6 — * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MEST2G-025-10-CM32 Pin Diode Switch Element Rev. V1 Absolute Maximum Ratings1,2 Parameter Absolute Maximum Breakdown Voltage (VR) 200 V Forward Current (IFDC) 200 mA Thermal Resistance (θJC) 25°C/W Junction Temperature (TJ) -40°C to 175°C Storage Temperature (TSTG) -55°C to +150°C Mounting Temperature (TMTG) +260°C per JEDEC STD-J-20C Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these Class 0 (HBM) devices. 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. MACOM does not recommend sustained operation near these survivability limits. Typical Performance Curves: TA = 25°C, ZO = 50 Ω, -10 dBm Small Signal Insertion Loss Isolation Input / Output Return Loss 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MEST2G-025-10-CM32 Pin Diode Switch Element Rev. V1 Resistance vs. Bias Current, 100 MHz Junction Temperature vs. Input Power Mounted on Heat Sink @ TA = 25°C, 1.3 GHz PCB Layout 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MEST2G-025-10-CM32 Pin Diode Switch Element Rev. V1 Outline (CM32) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MEST2G-025-10-CM32 Pin Diode Switch Element Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support