MSWSE-040-10

MSWSE-040-10 PIN Diode Series Switch Element 1 1 2 2 2 (0805P) Features Description • Supports up to 40 watts power when cold switched • Low Insertion Loss 0.25 dB typical up to 2.7 GHz • Medium Isolation 11 dB typical up to 2.7 GHz A broadband, high linearity, medium power series switch element in a 2.0 X 1.3 mm QFN package. This device is designed for WiMax, Wibro, WLAN, TD-SCDMA and other wireless infrastructure applications. It is also suited for 0.1 ~ 3 GHz applications with up to 40 watts of power. Electrical Specifications, TA = +25 °C SYMBOL TEST CONDITIONS MIN TYPICAL MAX UNITS VBR IR = 10 μA 250 – – V VF IF = 50 mA – 900 – mV CJ VR = 50 V F = 1 MHz – 0.12 – pF RS IF = 10 mA F = 500 MHz – 2.0 – Ω RS IF = 50 mA F = 500 MHz – 0.6 1.4 Ω t IF = 10 mA IR = 6 mA 50% – 700 – nsec W I - Layer – 40 – mm IL IF = 50 mA F = 2.025 GHz – 0.12 0.20 dB F = 2.3 ~ 2.7 GHz – 0.25 0.35 dB IRL IF = 50 mA F = 2.025 GHz 15 25 – dB F = 2.3 ~ 2.7 GHz 15 20 – dB Iso VR = 10 V F = 2.025 GHz 10 14 – dB F = 2.3 ~ 2.7 GHz 9 11 – dB Absolute Maximum Ratings RATING LIMITS UNITS VR 250 V IF 100 θJC 20 TJ +175 o TSTG -65 to +150 o TSOLDER mA C/W o C C +260 C per JEDEC J-STD-20C o METELICS Revision Date: 3/24/2012 1 MSWSE-040-10 METELICS Typical RF Performance at TA = 25 oC, Zo = 50 Ω, Small Signal (Unless Otherwise Specified) Insertion Loss Input Return Loss 0 0 50 mA -0.1 -5 -0.2 10 mA -0.4 IRL, dB IL, dB -10 20 mA -0.3 -0.5 -0.6 -0.7 -15 -20 -25 10 mA -30 -0.8 20 mA -35 -0.9 50 mA -40 -1 0 0.5 1 1.5 2.3 2 2.5 2.7 0 3 0.5 1 1.5 2 2.3 2.5 2.7 3 Freq, GHz Freq, GHz Series Resistance vs. Current Isolation (Freq = 500 MHz) 0 10000 -5 -10 1000 -20 -25 Rs, Ohms Iso, dB -15 -30 -35 -50V -20V -10V -40 -45 100 10 1 -50 0 0.5 1 1.5 2.3 2 2.5 2.7 3 Freq, GHz 0.1 0.01 0.1 1 Bias, mA Junction Temperature vs Power with the Backside of Board maintained @ 25°C Board thickness 62 mils 80 70 60 Pin (W) 50 40 30 20 10 0 50 60 70 80 90 100 110 120 130 140 150 160 170 Junction Temperature(C) Revision Date: 3/24/2012 2 180 10 100 MSWSE-040-10 METELICS Bias Schematic (0.1 to 3 GHz) +5V RF Output Enable 1 +5V Q1 BSS84LT1 2 U1 SN74ACT14 Schmitt-Trigger R1 75 1/2 W Z1 13 V BZX79-B13 Use DC/DC converter if -12V is not available. -12V Q2 2N7002E R2 1.2 K R3 1.2K 1/2 W C4 0.1 uF 5 C1(1) 56 pF 15 pF 6.8 pF RF Input L1 420 nH L3 420 nH L2 51 nH L4 51 nH 1 C2(1) 56 pF 15 pF 6.8 pF 2 C5 0.1 uF 1 Notes: 1. Use different capacitor values for different frequency bands as follows: 56 pF: 0.1 to 2.1 GHz 15 pF: 0.7 to 5.0 GHz 6.8 pF: 1.5 to 6.0 GHz RF Output 2 D1 MSWSE-040-10 +5V DC/DC Converter V-Infinity VBT1-S5-S12-SMT 4 C3(1) 56 pF 15 pF 6.8 pF Parts List Component Description Manufacture P/N R1 75W, 1/2W, 1210 chip resistor KOA Speer RK73B2ETTD750J R2 1.2KW, 1/10W, 603 chip resistor KOA Speer RK73B1JTTD122J R3 1.2KW, 1/2W, 1210 chip resistor KOA Speer RK73B2ETTD122J C1,C2,C3 (1) 56pF, 250VDC Capacitor, 0603 pkg ATC ATC600S560JT250XT C1,C2,C3 (1) 15pF, 250VDC Capacitor, 0603 pkg ATC ATC600S150JT250XT C1,C2,C3 (1) 6.8pF, 250VDC Capacitor, 0603 pkg ATC ATC600S6R8JT250XT C4,C5 0.1 uF, 50VDC Capacitor, 0805 pkg ATC ATC0805XR7104KT2AT L1,L3 420nH, 340mA, 700MHz SRF Inductor Coilcraft 0402AF-421XJLW L2,L4 51nH, 330mA, 2.3GHz SRF, Inductor Coilcraft 0402HP-51NXJLW Q1 50V, 130mA, P-Channel MOSFET ON SEMI BSS84LT1 Q2 60V, 310mA, N-Channel MOSFET ON SEMI 2N7002E U1 Hex Schmitt-Trigger TTL Inverter Texas Instruments SN74ACT14 Z1 13V, 2%, 500mW Zener Diode Philips BZX79-B13 DC1 1W, 5V to 12V DC/DC Converter V-Infinity VBT1-S5-S12-SMT-AFM D1 PIN Diode Series Switch in 0805 pkg Aeroflex-Metelics MSWSE-040-10 Notes: 1. Use different capacitor values for different frequency bands as follows: 56 pF: 0.1 to 2.1 GHz 15 pF: 0.7 to 5.0 GHz 6.8 pF: 1.5 to 6.0 GHz Revision Date: 3/24/2012 3 MSWSE-040-10 METELICS PCB Layout Package Outline (0805P) and Electrical Schematic 0.033 ± 0.001 0.84 ± 0.03 0.050 ± 0.005 1.27 ± 0.13 2 2 0.009 ± 0.002 0.23 ± 0.05 0.021 ± 0.003 0.53 ± 0.08 1 0.029 0.736 0.009 ± 0.003 0.23 ± 0.08 0.025 ± 0.003 0.64 ± 0.08 0.032 ± 0.003 0.81 ± 0.08 Inches mm 0.044 1.117 0.027 ± 0.002 0.69 ± 0.05 1 0.008 ± 0.001 0.23 ± 0.03 PIN 2 0.026 ± 0.002 0.66 ± 0.05 XXX 0.080 ± 0.005 2.03 ± 0.13 0.033 0.838 0.009 ± 0.003 0.23 ± 0.08 1 ANODE 2 CATHODE 0.027 0.685 PIN 1 INCHES mm NOTES 1. Dimensions do not include mold flashing 2. Burrs and dumbar shall not exceed 0.002” per surface. 3. Lead co-planarity is 0.003” max 1 2 Aeroflex / Metelics Inc. Aeroflex Microelectronic Solutions 975 Stewart Drive Sunnyvale, CA 94085 TEL: 408-737-8181 ISO 9001: 2008 certified companies 54 Grenier Field Road Londonderry, NH 03053 TEL: 603-641-3800 Sales 888-641-SEMI (7364) metelics-sales@aeroflex.com www.aeroflex.com/Microwave www.aeroflex.com/Metelics Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused. Copyright 2009 Aeroflex / Metelics. All rights reserved. Revision Date: 3/24/2012 4 A17089