AIC1189-XXGY3

AIC1189 Ultra LDO 2A Linear Regulator With Adjustable & Bypass Pin FEATURES Guaranteed 2A Output Current. Fast Response in Line/Load Transient. W ide Operating Voltage Ranges: 2.3V to 5.5V. 0.01µA Shutdown Standby Current . Low Quiescent Current: 80µA. Fixed: 1.2V, 1.5V, 1.8V, 2.0V, 2.5V, 2.7V, 3.0V, 3.3V, 3.5V, 3.7V, 3.8V Output Voltage. Adjustable Output Voltage are available from 0.8~4.5V. Low Dropout 330mV at 1.5A and 2.8V output voltage, 440mV at 2A and 2.8V output voltage. High PSRR 70dB at 1kHz. Active Low or High Shutdown Control.Current Limit and Thermal Protection. Available in 2% Output Tolerance. Available in SOT-223 & TO-220 (3 pin) & SOP8 (8 pin) and TO-252 &TO-263 (3 & 5 pin) Package. DESCRIPTION A low noise, high PSRR and ultra low dropout linear regulator AIC1189 is optimized for low ESR ceramic capacitors operation with 2A continuous current. The AIC1189 is designed for portable and wireless devices with demanding performance and space requirements. The AIC1189 offers high precision output voltage of ±2% tolerance. Output voltage can also be adjusted for those other than the preset values. A noise bypass pin is available for further reduction of output noise. The bypass pin could be floating if it’s unnecessary. At 2A load current and 2.8V output voltage, a 440mV dropout is performed. The quality of low quiescent current and low dropout voltage makes this device ideal for battery power applications. The high ripple rejection and low noise of the AIC1189 provide enhanced performances for critical applications such as cellular phones, and PDAs. In addition, a logic-level shutdown input is included, which reduce supply current to 0.01µA (typ.) in shutdown mode with fast turn-on time less than 100µs. The AIC1189’s current limit and thermal protection provide protection against any overload condition that would create excessive junction temperatures. APPLICATIONS LCD TV, LCD Monitor, DPF. Networking, STB. Portable AV Equipment. Note Book PC Applications. PC Peripherals. TYPICAL APPLICATION CIRCUIT AIC1189-33 Vin 1 VIN GND Cin 4.7uF 2 VOUT 3 Vin 2 1 Cin 4.7uF 3 AIC1189AL-33 VIN EN GND VOUT ADJ 4 5 R1 300k Fixed Linear Regulator Analog Integrations Corporation ： ： ± Vout 3.3V Cout 4.7uF Vout 2.8V ENABLE R2 120k Cout 4.7uF Adjustable Linear Regulator Si-Soft Research Center 3A1, No.1, Li-Hsin Rd. I, Science Park, Hsinchu 300, Taiwan, R.O.C. TEL: 886-3-5772500, FAX: 886-3-5772510 www.analog.com.tw DS-1189G-02 011909 1 AIC1189 TYPICAL APPLICATION CIRCUIT EN/SD SW1 1 Vin Vout 2.8V Cin 4.7uF Cout 4.7uF R2 120K 2 3 R1 300K 4 AIC1189L EN/SD VIN VOUT ADJ GND GND BP GND 8 7 6 5 Cbp 22nF (Continued) Adjustable Linear Regulator in SOP-8 Package ORDERING INFORMATION AIC1189-XXXXX XX PACKING TYPE TR: TAPE & REEL TB: TUBE PACKAGE TYPE Y3: SOT-223 E3: TO-252 M3: TO-263 T3: TO-220 P: Lead Free Commercial G: Green Package OUTPUT VOLTAGE 12: 1.2V 15: 1.5V 18: 1.8V 20: 2.0V 25: 2.5V 27: 2.7V 30: 3.0V 33: 3.3V 35: 3.5V 37: 3.7V 38: 3.8V (Of a unit of 0.1V within 0.8~4.5V, additional voltage versions are available on demand) 3 PIN CONFIGURATION SOT-223 (Y3) TOP VIEW 1: VIN 2: GND (TAB) 3: VOUT 1 2 3 TO-252 (E3) TOP VIEW 1: VIN 2: GND (TAB) 3: VOUT 1 2 3 TO-263 (M3) TOP VIEW 1: VIN 2: GND (TAB) 3: VOUT TO-220 (T3) TOP VIEW 1: VIN 2: GND (TAB) 3: VOUT 12 3 1 2 3 Example: AIC1189-18PE3TR 1.8V Version, in TO-252 Lead Free Package & Tape & Reel Packing Type 2 AIC1189 ORDERING INFORMATION AIC1189XX-XXXXX XX PACKING TYPE TR: TAPE & REEL TB: TUBE PACKAGE TYPE E5: TO-252-5 M5: TO-263-5 P: Lead Free Commercial G: Green Package OUTPUT VOLTAGE 12: 1.2V 15: 1.5V 18: 1.8V 20: 2.0V 25: 2.5V 27: 2.7V 30: 3.0V 33: 3.3V 35: 3.5V 37: 3.7V 38: 3.8V (Of a unit of 0.1V within 0.8~4.5V, additional voltage versions are available on demand) ENABLE TYPE L: Chip Enable Low H: Chip Enable High B: Bypass A: ADJ Example: AIC1189BH-18PM5TR W ith Bypass Pin, Chip Enable High, 1.8V Version, in TO-263-5 Lead Free Package & Tape & Reel Packing Type (Continued) 5 PIN CONFIGURATION TO-252-5 (E5) TOP VIEW 1: EN / EN 2: VIN 3: GND (TAB) 4: VOUT 5: BP/ ADJ TO-263-5 (M5) TOP VIEW 1: EN / EN 2: VIN 3: GND (TAB) 4: VOUT 5: BP/ ADJ 12 345 12345 3 AIC1189 ORDERING INFORMATION AIC1189X-XXXXX XX PACKING TYPE TR: TAPE & REEL TB: TUBE PACKAGE TYPE R8: SOP-8 G: Green Package (Continued) 8 PIN CONFIGURATION SOP-8 (R8) Exposed Pad (Heat Sink) TOP VIEW 1: EN / EN 2: VIN 3: VOUT 4: ADJ 5: GND (TAB) 6: BP 7: GND (TAB) 8: GND (TAB) 1 2 3 4 8 7 6 5 OUTPUT VOLTAGE 12: 1.2V 15: 1.5V 18: 1.8V 20: 2.0V 25: 2.5V 27: 2.7V 30: 3.0V 33: 3.3V 35: 3.5V 37: 3.7V 38: 3.8V (Of a unit of 0.1V within 0.8~4.5V, additional voltage versions are available on demand) ENABLE TYPE L: Chip Enable Low H: Chip Enable High Example: AIC1189H-18GR8TR Chip Enable High, 1.8V Version, in SOP-8 Green Package & Tape & Reel Packing Type Marking Part No AIC1189-xxPY3 Marking HAxxP Part No AIC1189-xxGY3 Marking HAxxG xx represents output voltage. (08=0.8V, 09=0.9V, ….…, 44=4.4V, 45=4.5V) 4 AIC1189 ABSOLUTE MAXIMUM RATINGS Input Voltage ....................................................................................................................................... 6V EN Pin Voltage .................................................................................................................................... 6V Noise Bypass Terminal Voltage .......................................................................................................... 6V Operating Temperature Range ............................................................................................ -40ºC~85ºC Maximum Junction Temperature .................................................................................................. 150ºC Storage Temperature Range ............................................................................................. -65ºC~150ºC Lead Temperature (Soldering, 10 sec) ......................................................................................... 260ºC Thermal Resistance (Junction to Case) SOT-223 ............................................................... 15ºC /W TO-252 .................................................................... 8ºC /W TO-263 .................................................................... 3ºC /W TO-220 .................................................................... 3ºC /W SOP-8 (Exposed Pad) .......................................... 15ºC /W Thermal Resistance (Junction to Ambient) SOT-223 ............................................................. 130ºC /W (Assume no ambient airflow, no heat sink) TO-252 ................................................................ 100ºC /W TO-263 .................................................................. 60ºC /W TO-220 .................................................................. 50ºC /W SOP-8 (Exposed Pad) 60ºC /W Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. 5 AIC1189 ELECTRICAL CHARACTERISTICS (CIN = Cout = 4.7µF, CBP = 22nF, VIN = VOUT + 1V, TJ=25°C, unless otherwise specified) (Note 1) PARAMETER Input Voltage (Note 2) Output Voltage Tolerance Continuous Output Current IOUT =1mA TEST CONDITIONS SYMBOL VIN VOUT IOUT 0.4V, 1.6V, IQ MIN. 2.3 -2 2 TYP. MAX. 5.5 2 UNIT V % A Output Current Limit IOUT = 1.5A, 0.8V IOUT = 2A, 0.8V Dropout Voltage IOUT = 1.5A, 2V IOUT = 2A, 2V IOUT = 1.5A, VOUT IOUT = 2A, VOUT Line Regulation Load Regulation Ripple Rejection Output Noise Voltage Temperature Coefficient Thermal Shutdown Temperature Thermal Shutdown Hysteresis ADJ Pin Specifications ADJ Pin Current ADJ Pin Threshold Reference Voltage Tolerance VIN = VOUT + 1V to 5.5V, IOUT =1mA IOUT =1mA to 2A f=1KHz, Ripple=0.5Vp-p, CBP = 22nF, f= 10~100KHz TC VIN = VOUT + 1V TSD ∆TSD 50 150 20 VADJ = VREF IADJ VTH(ADJ) VREF 0.05 0.784 10 0.1 0.8 100 0.2 0.816 nA V V ℃ ℃ ℃ ≧ ≧ ≦ ≦ ≦ ≦ Ω RLOAD = 0.1 VOUT