AM1/4LS-1209S-NZ

Click on Series name for product info on aimtec.com Series AM1/4LS-NZ 0.25 Watt | DC-DC Converter FEATURES: • • • • SMD Package I/O Isolation 1500 & 3000 VDC Ultra Low Ripple and Noise Industry Standard Pinout • • • • Single Output Models Operating temperature -40oC to + 105oC Efficiency up to 79% Continuous Short Circuit Protection Models Single output Model Input Voltage (V) Output Voltage (V) Output Current Max | Min (mA) Input Current Full | No Load (mA) Isolation (VDC) Max Capacitive Load(uF) Efficiency (%) AM1/4LS-0305S-NZ‡ 2.97-3.63 5 50 5 104 20 1500 220 71 AM1/4LS-0503S-NZ 4.5-5.5 3.3 76 8 68 15 1500 220 72 AM1/4LS-0505S-NZ 4.5-5.5 5 50 5 68 15 1500 220 67 AM1/4LS-1205S-NZ 10.8-13.2 5 50 5 27 10 1500 220 66 AM1/4LS-1209S-NZ 10.8-13.2 9 28 3 27 10 1500 220 73 AM1/4LS-1212S-NZ 10.8-13.2 12 21 2 27 10 1500 220 77 AM1/4LS-2405S-NZ 21.6-26.4 5 50 5 15 8 1500 220 54 AM1/4LS-0505SH30-NZ 4.5-5.5 5 50 5 68 15 3000 220 67 AM1/4LS-1205SH30-NZ 10.8-13.2 5 50 5 27 10 3000 220 66 ‡ With Momentary short circuit protection of 1 second NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity3500K hrs (MIL-HDBK -217F, Ground Benign, t=+25°C)hours 1.5mm from case for 10 sec 300 115 % RH g °C °C Safety Specifications Parameters Agency Approval EN55032 Class B (see recommended circuit) IEC 61000-4-2, Contact ±8kV, Criteria B Standards Pin Out Specifications and Dimensions Pin 1 2 3 4 5 6 7 8 Front View Single - V Input + V Input No Pin -V Output +V Output No Pin No Pin N.C. 8.3 (0.32) Side View 5.00 (0.19) 0º~10º angle 2.0 (0.08) 0.25 (0.01) 1.45 (0.06) Top View 0.88 (0.04) 12.70 (0.50) 7.62 (0.30) 11.20 8.30 (0.44) (0.32) 1 2.54 (0.10) www.aimtec.com 0.60 (0.02) Tel: +1 514 620 2722 F 051e R12.D Rev: 10/22/A 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4LS-NZ 0.25 Watt | DC-DC Converter Typical Application Circuits Single Vin+ Vo+ C2 C1 Vin- Vin (VDC) C1 (µF) Vout (VDC) C2 (µF) 3.3/5 12 24 4.7 2.2 1 3.3 & 5 12 15 10 2.2 1 Vo- EMI Recommended Circuit (Class B) Single LDM Vin+ Vo+ C1 Vin- 6.8uH C2 4.7uF/ 50V Vo- Input Reflected Ripple Current Test Circuit Vin+ L1 (4.7 µh) Test Point Vo+ + C1 (220 µf) Vin- - Aimtec DC-DC Converter RL (Full Load) Vo- * Tested at full load, and nominal input www.aimtec.com Tel: +1 514 620 2722 F 051e R12.D Rev: 10/22/A 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4LS-NZ 0.25 Watt | DC-DC Converter Load Accuracy Tolerance Graph Derating Free Air Convection Tolerance Envelope Graph 100 ºC 100 +2.5% Nominal Voltage +2.5% -2.5% -5% -7.5% Output Power % Output Voltage (%) +10% 80 60 Safe Operating Area 40 20 105C 0 10% 50% 100% -40 -20 Output Current (%) 0 40 80 100 120 140 Ambient Temperature º C Typical Efficiency vs. Loading www.aimtec.com Tel: +1 514 620 2722 F 051e R12.D Rev: 10/22/A 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4LS-NZ 0.25 Watt | DC-DC Converter NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity