AM100EBO-4812SNZ-B

AM100EBO-NZ DC-DC Converter Preliminary Click to ORDER AM100EBO-NZ samples The AM100EBO-NZ series is a high-performance 1/8 brick DC/DC converter specifically designed for a variety of telecom applications. It features 100W of output power with no requirement for minimum load, a wide input voltage of 3675VDC, operating temperature up to 100℃ and tested I/O isolation of 1500VDC. Additionally, this series includes input under-voltage protection, output overvoltage, short-circuit, over-current and over-temperature protection, remote On/Off control, remote sense compensation and output voltage trim adjustment. The AM100EBO-NZ meets IEC/EN/UL 62368 standards and can be widely used in the industrial control, electric power instrumentation and communication sectors. 1/8 brick package Features • • • • • • Summary High I/O Isolation 1500VDC Input under voltage protection, over temperature protection, output over voltage, over current and short circuit protection Operating Temp: -40 °C to +100 °C Low profile height: 9.69mm Compact 1/8 brick footprint and high-power Density Efficiency up to 93% AM100EBO-NZ 1500 48 6000 100 125 28 125 100 75 36 1500 5 3.3 3 33 1000 0.25 Input voltage Output voltage (VDC) (V) Isolation (VDC) Power (W) -40 -40 Temp. range (°C) Derating (°C) Applications Training Press Release Coming Soon! IoT Product Training Video (click to open) F 052e R4 Rev: 04/23/A Industrial Telecom Portable Equipment Application Notes www.Aimtec.com 1 AM100EBO-NZ DC-DC Converter Preliminary Models & Specifications Single Output Model AM100EBO-4805SNZ AM100EBO-4812SNZ AM100EBO-4815SNZ AM100EBO-4824SNZ AM100EBO-4828SNZ Input Voltage (VDC) Output Voltage (VDC) Maximum Output Current (A) Maximum capacitive Load (µF) Efficiency Typ. (%) 48 (36-75) 48 (36-75) 48 (36-75) 48 (36-75) 48 (36-75) 5 12 15 24 28 20 8.3 6.67 4.17 3.57 6000 2000 2000 1000 1000 92 93 93 92 92 Input Specification Parameters Input current Filter Absolute maximum rating Input reflected ripple current Start-up voltage Start-up current UVLO On/Off control Conditions Nominal input voltage, full load /no load Typical Maximum Units 2264/20 2315/30 mA >0.7 30 80 100 36 5 VDC mA VDC A VDC Pi filter Maximum duration 1s 29 On Off Idle current Control pin open or 3.5-12VDC Control pin short to –Vin or 0-1.2VDC 3 10 mA Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions Typical Maximum Units 60 sec, leakage ≤ 1mA 500VDC 100kHz/0.1V >1500 >1000 1000 Conditions Typical Maximum Units 0-100% load LL-HL 5-100% load ±1 ±0.2 ±0.5 Nominal input voltage, 5-100% load Nominal input voltage, 0-5% load 25% load step change 25% load step change, 5V output 25% load step change, others 100 ±3 ±0.5 ±0.75 ±0.03 150 5 500 ±8 ±5 ±10 5 100 % % % %/°C mV pk-pk % of Vout µs % % % % ms VDC MΩ pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Temperature coefficient Ripple & Noise* Transient Recovery Time Transient Response Deviation 300 ±5 ±3 Trim Sense compensation Start-up time Nominal input voltage, constant resistance load * Ripple and Noise are measured at 20MHz bandwidth. Please refer to the application note for specific details. F 052e R4 Rev: 04/23/A www.Aimtec.com 2 AM100EBO-NZ DC-DC Converter Preliminary General Specifications Parameters Switching frequency* Short circuit protection Over voltage protection Over current protection Over temperature protection Operating temperature Storage temperature Soldering temperature Conditions Typical Full load, nominal input 200 Continuous, auto recovery, recovery time ≤3S ≥ 110 ≥ 110 Surface temperature 130 With derating -40 to +100 -55 to +125 Wave soldering, maximum duration 10s Manual soldering, 1.5mm distance, ≤ 10s Free air convection or forced air convection Non-condensing >5 27 Maximum Units KHz 160 190 260 300 % of Vo % of Io °C °C °C °C °C Cooling Humidity 95 % RH Weight g Operating altitude 2000 m Dimensions (L x W x H) 2.3 x 0.9 x 0.38 inches (58.42 x 22.86 x 9.69 mm) MTBF 500 000 hrs (MIL-HDBK -217F, t=+25°C) / Full Load * Switching frequency reduced when load < 50%. NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity